`Hangs on boot to ash

[Herman Hoekstra]

Hello everybody,

My Box is a oxtagon shaped  t95z plus 2 mb 16 mb

chipset:

processor arm cortex -a53
mali T820 GPU
AP6255 wifi ac + bluetooth 4.2
sandisk SDINAD1F4-16G 16G emmc 16G rom
lanson L5TC4G63CFR x2 dram 2GB

 

I try to install armbian_community_26_2 _0-trunk.100 aml-s9xx-box_noble_current_6.12.63_cinnamon_dektop.img.xz

I use meson-gxm-vega-s96.dtb

And u-boot-s905x-s912.dtb copy and rename as u-boot.ext

It boots to ash then it stops

No asking for password and user

I have no clue what to do next

I have entered armbian-config but this returns a error

Any tips?

Edited Saturday at 08:21 PM by Herman Hoekstra
more info

[Herman Hoekstra]

Progress

I installed a command line image

Armbian_community_26.2.0-trunk.130_Aml-s9xx-box_noble_current_6.12.63.img.xz

This image let me boot to a promt asking me to set a root pw make a user and pw

Then it gives me a Prompt can use raspbian-config to make a wifi connection

But i have a overscan the prompt so i must type the first letters blind

I also miss the first letters of the answer

I cannot run xrandr to correct this problem

xrandr reports cant open display after the command

xrandr --listmonitors

Also how can i install and run a desktop on this system

Thanks in advance for a anser

 

Edited Sunday at 07:33 PM by Herman Hoekstra

[SteeMan]

I'd recommend you ssh into the box, then you can configure to your needs.

[Herman Hoekstra]

Hello SteeMan

I can start armbian-config but i cannot find where to change the display and install a desktop

It als displays the current is plucky is not supported or not listed

Thanks

 

Edited yesterday at 02:44 PM by Herman Hoekstra

[SteeMan]

That isn't some you can do in armbian-config.  This is Linux, use search to find how others have solved this.

[Herman Hoekstra]

Succes,

I lowlevel formatted my SD cart.

Now i can install the CLI

I think there was something not right 

The next thing to try is install a desktop image.

And fix the overscan issue and then install to the emmc internal memory

My internal menory is Sandisk SDINADF4-16G so i am hopefull.

But when i brick the system, is it stil possible to boot from a SD card or must i try to flash a version of android first using a USB A to USB a cabble?

Sorry I am not allowed to upload Image?

Edited 5 hours ago by Herman Hoekstra

[SteeMan]

3 hours ago, Herman Hoekstra said:

But when i brick the system, is it stil possible to boot from a SD card or must i try to flash a version of android first using a USB A to USB a cabble?

It depends on how you have bricked it.  Reflashing Android takes you back to a clean starting point.

[Herman Hoekstra]

Hello SteeMan

I mean bricking when trying to install the system to EMMC memory

My memory is SDINADF4-16G