Cannot boot the

[rxg847 0]

Hi,

 

When I tried booting the vanilla kernel, downloaded from http://www.armbian.com/hummingboard/, on my Hummingboard i4 Pro, I get the following error message from u-boot:

ERROR: Did not find a cmdline Flattened Device Tree
Could not find a valid device tree
Booting from net

Has anyone else seen the same issue?

 

Thanks.

[Igor 2301]

You have Hummingboard 2 ?

[rxg847 0]

You have Hummingboard 2 ?

Hi, 

 

Thanks for replying. I am kind of new and not aware what is Hummingboard 2. But I have the Hummingboard i4 Pro Quadcore model. 

 

Thanks.

[Igor 2301]

I assume you have v2 which is not directly supported ... some small hack is needed: 

cp /boot/dtb/hummingboard.dtb /boot/dtb/hummingboard2.dtb

You will need to mount sd card on some linux ... than it will boot. I will fix this problem in next update ... until then, you can do this.

 

I only have V1.0 so I am not aware what does work and what not. BTW. You can attach or link a picture to make sure.

[rxg847 0]

I assume you have v2 which is not directly supported ... some small hack is needed: 

cp /boot/dtb/hummingboard.dtb /boot/dtb/hummingboard2.dtb

You will need to mount sd card on some linux ... than it will boot. I will fix this problem in next update ... until then, you can do this.

 

I only have V1.0 so I am not aware what does work and what not. BTW. You can attach or link a picture to make sure.

 

Sure, thank you for helping!