issues when using the lastest U-boot on Lite2


Recommended Posts

RT,

i am trying to use git and aarch64 tools to compile a lastest u-boot by my own,but ,it failed.

there're the steps i was doing:

 

1. downloads the latest u-boot source code from offical web:

       git clone git://git.denx.de/u-boot.git

 

2.downloads the ARM Trusted Firmware from offcial web:

       git clone https://github.com/ARM-software/arm-trusted-firmware

 

3.compile the ATF for BL31 by using this cmd:

        sudo make CROSS_COMPILE=aarch64-linux-gnu- PLAT=sun50i_h6 all

and then move the BL31 file into the u-boot root fold.

 

4. compile the u-boot for H6 by using this cmd:

       sudo make ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- orangepi_lite2_defconfig

       sudo make

 

5.burn the u-boot-sunxi-with-spl.bin file on SD card following the README.sunxi64 file

       dd if=u-boot-sunxi-with-spl.bin of=/dev/sdx bs=8k seek=1

 

6.plug in the sd card and connect the uart port and power on,i think and i am sure the default baudrate is 115200,

but when i open the terminal and try to read and debug the u-boot,it displayed as blow:

 

"

膂秜?第曤W -#1?!?!!?!%縠ey濆?y,XWm颟Y纣?搔f鞗df氭停搾MO5Z&?挺?矻歀2撡33N檍曋?攻K/]媬~{紊觙斐─蓲懗逃痔L嫣1ff瞟黍骃娉姒鍸?,XW阱℡骟?搔f袒﹔'Q摀?:ど$$M~迿麚%?驧&?LM?,XW阱?篌?e觙?    猟蓳SU?蓱s筫r潴?騠檽揙鏆SI覔搾1摔2IS撜蓅K蒕?y?W隍?篌螗K+Y篌ed疑扡觵邋歃櫈=y統経i疕H眼鲋謑碇Vm旉V龆諺-赩谥谥獀?鷞徽竖膂鲔鲋鲮+V冬鰈熘霮?鲻鲋黼?娫U蕑
:
妀T脲難_U嬁靠}''-##5縪摽痀Uc暉m隤+镾右?m?姫?岛V雡[}e嬁繚縬-{咫YY^丙U5氇胨u?曞-V雊!=7-#1縰#-!#%5#?!%縮}W#?U踊蔜?*竖?mm?[けT谠?鶸鲻鲻Vo/V蜒丙T谠?鶸鲻鲻Vo创禧T谠?鶸鲻鲻Vo央j鬕猨艋t轸氇ti

篢鳆埚镲镫?镲稃??FDKQч?在t蚤?iR羲鹶??%9熆-?5#?5-95咫档k?氷:j胡趖詑?i译鯷[+?=-#1縐Y{#e隿!?!#!''5?!#7咫UY{??!57?_'5=5?5勘;?=笨3-e?=-#1縐Y{#e隿!?!#!''5?!#7咫c!?/5#5?!#7e?--#1?#-!#%5#?=-=;'5嬁5-7咫%--#1?#-!#%5#?=-=;'5嬁;!!3-'5咫[5-5-#1?-'5嬁5'-#?31煙煙煙熷隿!?/5#5?!#7e?--#1?#-!#%5#?=-=;'5嬁;!!3-'5咫[5-5-#1?-'5嬁5'-#?31煙煙煙咫c!?/5#5?!#7e?--#1?#-!#%5#?=-=;'5嬁;!!3-'5咫[5-5-#1?-'5嬁5'-#?31煙煙熷隿!?/5#5?!#7e?--#1?#-!#%5#?=-=;'5嬁;!!3-'5咫[5-5-#1?-'5嬁5'-#?31煙煙咫c!?/5#5?!#7e?--#1?#-!#%5#?=-=;'5嬁;!!3-'5咫[5-5-#1?-'5嬁5'-#?31煙熷隿!?/5#5?!#7e?--#1?#-!#%5#?=-=;'5嬁;!!3-'5咫[5-5-#1?-'5嬁5'-#?31煙咫c!?/5#5?!#7e?--#1?#-!#%5#?=-=;'5嬁;!!3-'5咫[5-5-#1?-'5嬁5'-#?31熷隿!?/5#5?!#7e?--#1?#-!#%5#?=-=;'5嬁;!!3-'5咫[5-5-#1?-'5嬁5'-#?31咫c!?/5#5?!#7e?--#1?#-!#%5#?=-=;'5嬁;!!3-'5咫[5-5-#1?-'5嬁5'-#?31?53='?%?#-咫c!?/5#5?!#7e?--#1?#-!#%5#?=-=;'5嬁;!!3-'5咫[5-5-#1?-'5嬁5'-#?31?53='?%咫c!?/5#5?!#7e?--#1?#-!#%5#?=-=;'5嬁;!!3-'5咫[5-5-#1?-'5嬁5'-#?31?53='咫c!?/5#5?!#7e難!#3-1?-'5?!?!#7咫=-#1縐Y{#e隿!?!#!''5?!#7咫c!?/5#5?!#7e?"

 

(sorry for unable to paste the sreenshot.....)

 

i can't read anything...

 

can you help me?

thx so much!!!

Link to post
Share on other sites
Armbian is a community driven open source project. Do you like to contribute your code?

I tried a few also, can anyone point out a definitely working image? I've heard that some images need more power than common USB chargers provide, which I find kinda strange.

 

Anyway, out of those that are provided on official site I have OrangePi_Lite2_Ubuntu16.04_Desktop_Xfce_Beta.tar.gz and OrangePi_Lite2_Android_7.0_en_gapps_v1.3.img.tar.gz working.

 

I don't expect HDMI to work, but those that I tried didn't even give green LED.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...