g40 Posted January 7, 2019 Share Posted January 7, 2019 Working from the documentation here: https://docs.armbian.com/Developer-Guide_FEL-boot/#what-is-felnfs-boot. Not much luck so far with an FA NanoPi K1 Plus. Please see below for details. TIA. Link to comment Share on other sites More sharing options...
g40 Posted January 8, 2019 Author Share Posted January 8, 2019 So this is failing for some odd reason. Armbian command line configuration is: /compile.sh BOARD=nanopik1plus BRANCH=next KERNEL_ONLY=no KERNEL_CONFIGURE=no RELEASE=jessie BUILD_DESKTOP=no ROOTFS_TYPE=fel FEL device mode is activated: @ubuntu-1804:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 005: ID 1f3a:efe8 Onda (unverified) V972 tablet in flashing mode Bus 002 Device 004: ID 0e0f:0008 VMware, Inc. Armbian interaction is then ... [ o.k. ] Calling image customization script [ customize-image.sh ] [ o.k. ] Starting FEL boot [ nanopik1plus ] [ o.k. ] Connect device in FEL mode and press [ <Enter> ] [ o.k. ] Loading files via [ FEL USB ] Failed to open input file: No such file or directory [ o.k. ] Press any key to boot again, <q> to finish [ FEL ] [ o.k. ] Connect device in FEL mode and press [ <Enter> ] [ o.k. ] Loading files via [ FEL USB ] Failed to open input file: No such file or directory [ o.k. ] Press any key to boot again, <q> to finish [ FEL ] Link to comment Share on other sites More sharing options...
zador.blood.stained Posted January 8, 2019 Share Posted January 8, 2019 There is no FEL support for 64-bit targets in the build script. Link to comment Share on other sites More sharing options...
g40 Posted January 8, 2019 Author Share Posted January 8, 2019 Hi Zador, Thanks. Have you had any 64bit boards working with NFS? Link to comment Share on other sites More sharing options...
zador.blood.stained Posted January 8, 2019 Share Posted January 8, 2019 Just now, g40 said: Thanks. Have you had any 64bit boards working with NFS? No. Root on NFS should not be hard by itself (similar to H3, loading u-boot and kernel from SD). FEL support, on the other hand, is not implemented in the mainline u-boot for 64-bit chips, so it requires either using prebuilt u-boot binaries or adding patches to u-boot and rewriting the build script. Link to comment Share on other sites More sharing options...
Recommended Posts