Kunal Posted January 24, 2019 Share Posted January 24, 2019 Hi, I'm trying to interface a USB module via the usb pins (USB-DM2 and USB-DP2 - Pin 3 and 4 on the 13-pin header) and powered by the 5V and GND pin (Pin 1 and 2 on the 13-pin header) on the Orange Pi Zero board. During startup/reboot of the Orange Pi Zero, the module fails to get recognised and come up( output of lsusb and dmesg do not show any usb devices). The module, however gets recognised and works fine when plugged out and back in. Are there any extra steps that I have to take in order to make the module get recognised during bootup? Any help regarding the matter would be appreciated. Thanks in advance! Link to comment Share on other sites More sharing options...
Tido Posted January 24, 2019 Share Posted January 24, 2019 armbianmonitor -u tells the reader all the details about ur Installation, like Kernel Version and much more // sent from mobile phone // Link to comment Share on other sites More sharing options...
Recommended Posts