Gravelrash Posted April 5, 2016 Share Posted April 5, 2016 There are many people who tend to use old phone chargers on there systems and wonder why things become problematic after a good while of usage. My recommendations to people who have this issue are the following 1 - if you are a *SERIOUS* modder or electronics engineer you will know all about bench power supplies and there benefits. 2 - for others who aren't in this category. I would like to share with you my preferred method to deliver power to dev boards. I utilse these shown in the link below. I have found these type to be incredibly stable after 18 months of running one nonstop on a live system i can happily describe them as rock solid and superbly over engineered for the task at hand. DISCLAIMER - I am in no way affiliated with the suppliers shown in the link but using it as a visual representation of the power units i have found to be very good http://www.ebay.co.uk/sch/i.html?_odkw=5v+4a+power+supply&_sop=15&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR1.TRC0.A0.H0.XDC5V+2A-60A.TRS0&_nkw=DC5V+2A-60A&_sacat=0 Link to comment Share on other sites More sharing options...
Recommended Posts