Guest Posted March 14, 2019 Posted March 14, 2019 (edited) I'm a newbie to Armbian, just a hobby user, no company behind me. While building Armbian for my Banana Pi R1 (aka Lamobo R1) [Allwinner A20, sunxi] the build system gave the following warnings originating from the U-Boot project. I think some maintainers and/or experienced users should take a look at the following. ===================== WARNING ====================== This board does not use CONFIG_DM_MMC. Please update the board to use CONFIG_DM_MMC before the v2019.04 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== ===================== WARNING ====================== This board does not use CONFIG_DM_USB. Please update the board to use CONFIG_DM_USB before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== ===================== WARNING ====================== This board does not use CONFIG_DM_SCSI. Please update the storage controller to use CONFIG_DM_SCSI before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== ===================== WARNING ====================== This board does not use CONFIG_DM_VIDEO Please update the board to use CONFIG_DM_VIDEO before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== Here's also the full content of the file ./cache/sources/u-boot/v2019.01/doc/driver-model/MIGRATION.txt : Spoiler ################# Migration Schedule ==================== U-Boot has been migrating to a new driver model since its introduction in 2014. This file describes the schedule for deprecation of pre-driver-model features. CONFIG_DM_MMC ------------- Status: In progress Deadline: 2019.04 The subsystem itself has been converted and maintainers should submit patches switching over to using CONFIG_DM_MMC and other base driver model options in time for inclusion in the 2019.04 rerelease. CONFIG_DM_USB ------------- Status: In progress Deadline: 2019.07 The subsystem itself has been converted along with many of the host controller and maintainers should submit patches switching over to using CONFIG_DM_USB and other base driver model options in time for inclusion in the 2019.07 rerelease. CONFIG_SATA ----------- Status: In progress Deadline: 2019.07 The subsystem itself has been converted along with many of the host controller and maintainers should submit patches switching over to using CONFIG_AHCI and other base driver model options in time for inclusion in the 2019.07 rerelease. CONFIG_BLK ---------- Status: In progress Deadline: 2019.07 In concert with maintainers migrating their block device usage to the appropriate DM driver, CONFIG_BLK needs to be set as well. The final deadline here coincides with the final deadline for migration of the various block subsystems. At this point we will be able to audit and correct the logic in Kconfig around using CONFIG_PARTITIONS and CONFIG_HAVE_BLOCK_DEVICE and make use of CONFIG_BLK / CONFIG_SPL_BLK as needed. CONFIG_DM_SPI CONFIG_DM_SPI_FLASH ------------------- Board Maintainers should submit the patches for enabling DM_SPI and DM_SPI_FLASH to move the migration with in the deadline. No dm conversion yet: drivers/spi/cf_spi.c drivers/spi/fsl_espi.c drivers/spi/lpc32xx_ssp.c drivers/spi/mpc8xx_spi.c drivers/spi/mpc8xxx_spi.c drivers/spi/mxs_spi.c drivers/spi/sh_qspi.c drivers/spi/sh_spi.c drivers/spi/soft_spi_legacy.c Status: In progress Deadline: 2019.04 Partially converted: drivers/spi/atcspi200_spi.c drivers/spi/davinci_spi.c drivers/spi/fsl_dspi.c drivers/spi/fsl_qspi.c drivers/spi/kirkwood_spi.c drivers/spi/mxc_spi.c drivers/spi/omap3_spi.c drivers/spi/ti_qspi.c Status: In progress Deadline: 2019.07 -- Jagan Teki <jagan@openedev.com> 12/24/2018 03/14/2018 CONFIG_DM_PCI ------------- Deadline: 2019.07 The PCI subsystem has supported driver model since mid 2015. Maintainers should submit patches switching over to using CONFIG_DM_PCI and other base driver model options in time for inclusion in the 2019.07 release. CONFIG_DM_VIDEO --------------- Deadline: 2019.07 The video subsystem has supported driver model since early 2016. Maintainers should submit patches switching over to using CONFIG_DM_VIDEO and other base driver model options in time for inclusion in the 2019.07 release. ################# Edited March 15, 2019 by Tido added spoiler - for better reading, please do that yourself next time. thx
Recommended Posts