Dombo 71
Members-
Posts
50 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Everything posted by Dombo 71
-
I have 4 usb device in my odroid N2 with bookworm. A powered USB hub, which has always woken up, and the found device are in the hub. If I put them in the N2 no difference. If I: ls -l /dev/serial/by-id pi@odroidn2:~$ ls -l /dev/serial/by-id total 0 lrwxrwxrwx 1 root root 13 Jul 22 02:51 usb-0658_0200-if00 -> ../../ttyACM0 lrwxrwxrwx 1 root root 13 Jul 22 02:51 usb-RFXCOM_RFXtrx433_A1XSS661-if00-port0 -> ../../ttyUSB1 And with.. sudo lsusb -v I get this output 23 from 192.168.5.101 pi@odroidn2:~$ sudo lsusb -v [sudo] wachtwoord voor pi: Bus 002 Device 005: ID 0bda:0411 Realtek Semiconductor Corp. Hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 9 Hub bDeviceSubClass 0 bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x0bda Realtek Semiconductor Corp. idProduct 0x0411 Hub bcdDevice 1.17 iManufacturer 1 Generic iProduct 2 4-Port USB 3.0 Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x001f bNumInterfaces 1 bConfigurationValue 1 iConfiguration 4 USB3.0 Hub bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 bInterfaceProtocol 0 Full speed (or root) hub iInterface 5 Interrupt In Interface Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 19 Transfer Type Interrupt Synch Type None Usage Type Feedback wMaxPacketSize 0x0002 1x 2 bytes bInterval 8 bMaxBurst 0 Hub Descriptor: bLength 12 bDescriptorType 42 nNbrPorts 4 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection bPwrOn2PwrGood 0 * 2 milli seconds bHubContrCurrent 8 milli Ampere bHubDecLat 0.2 micro seconds wHubDelay 3202 nano seconds DeviceRemovable 0x00 Hub Port Status: Port 1: 0000.02a0 5Gbps power Rx.Detect Port 2: 0000.02a0 5Gbps power Rx.Detect Port 3: 0000.02a0 5Gbps power Rx.Detect Port 4: 0000.02a0 5Gbps power Rx.Detect Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 0x002a bNumDeviceCaps 3 USB 2.0 Extension Device Capability: bLength 7 bDescriptorType 16 bDevCapabilityType 2 bmAttributes 0x0000f41e BESL Link Power Management (LPM) Supported BESL value 1024 us Deep BESL value 61440 us SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x00 wSpeedsSupported 0x000e Device can operate at Full Speed (12Mbps) Device can operate at High Speed (480Mbps) Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 1 Lowest fully-functional device speed is Full Speed (12Mbps) bU1DevExitLat 10 micro seconds bU2DevExitLat 1023 micro seconds Container ID Device Capability: bLength 20 bDescriptorType 16 bDevCapabilityType 4 bReserved 0 ContainerID {20b9cde5-7039-e011-a935-0002a5d5c51b} Device Status: 0x0001 Self Powered Bus 002 Device 003: ID 0bda:0411 Realtek Semiconductor Corp. Hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 9 Hub bDeviceSubClass 0 bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x0bda Realtek Semiconductor Corp. idProduct 0x0411 Hub bcdDevice 1.17 iManufacturer 1 Generic iProduct 2 4-Port USB 3.0 Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x001f bNumInterfaces 1 bConfigurationValue 1 iConfiguration 4 USB3.0 Hub bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 bInterfaceProtocol 0 Full speed (or root) hub iInterface 5 Interrupt In Interface Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 19 Transfer Type Interrupt Synch Type None Usage Type Feedback wMaxPacketSize 0x0002 1x 2 bytes bInterval 8 bMaxBurst 0 Hub Descriptor: bLength 12 bDescriptorType 42 nNbrPorts 4 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection bPwrOn2PwrGood 0 * 2 milli seconds bHubContrCurrent 8 milli Ampere bHubDecLat 0.2 micro seconds wHubDelay 3202 nano seconds DeviceRemovable 0x00 Hub Port Status: Port 1: 0000.0203 5Gbps power U0 enable connect Port 2: 0000.02a0 5Gbps power Rx.Detect Port 3: 0000.02a0 5Gbps power Rx.Detect Port 4: 0000.02a0 5Gbps power Rx.Detect Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 0x002a bNumDeviceCaps 3 USB 2.0 Extension Device Capability: bLength 7 bDescriptorType 16 bDevCapabilityType 2 bmAttributes 0x0000f41e BESL Link Power Management (LPM) Supported BESL value 1024 us Deep BESL value 61440 us SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x00 wSpeedsSupported 0x000e Device can operate at Full Speed (12Mbps) Device can operate at High Speed (480Mbps) Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 1 Lowest fully-functional device speed is Full Speed (12Mbps) bU1DevExitLat 10 micro seconds bU2DevExitLat 1023 micro seconds Container ID Device Capability: bLength 20 bDescriptorType 16 bDevCapabilityType 4 bReserved 0 ContainerID {20b9cde5-7039-e011-a935-0002a5d5c51b} Device Status: 0x0001 Self Powered Bus 002 Device 002: ID 05e3:0620 Genesys Logic, Inc. GL3523 Hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.10 bDeviceClass 9 Hub bDeviceSubClass 0 bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x05e3 Genesys Logic, Inc. idProduct 0x0620 GL3523 Hub bcdDevice 93.04 iManufacturer 1 GenesysLogic iProduct 2 USB3.1 Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x001f bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 19 Transfer Type Interrupt Synch Type None Usage Type Feedback wMaxPacketSize 0x0002 1x 2 bytes bInterval 8 bMaxBurst 0 Hub Descriptor: bLength 12 bDescriptorType 42 nNbrPorts 4 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 576 milli Ampere bHubDecLat 0.4 micro seconds wHubDelay 1508 nano seconds DeviceRemovable 0x00 Hub Port Status: Port 1: 0000.02a0 lowspeed L1 Port 2: 0000.02a0 lowspeed L1 Port 3: 0000.0203 lowspeed enable connect Port 4: 0000.02a0 lowspeed L1 Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 0x002a bNumDeviceCaps 3 USB 2.0 Extension Device Capability: bLength 7 bDescriptorType 16 bDevCapabilityType 2 bmAttributes 0x00000006 BESL Link Power Management (LPM) Supported SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x00 wSpeedsSupported 0x000e Device can operate at Full Speed (12Mbps) Device can operate at High Speed (480Mbps) Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 1 Lowest fully-functional device speed is Full Speed (12Mbps) bU1DevExitLat 8 micro seconds bU2DevExitLat 190 micro seconds Container ID Device Capability: bLength 20 bDescriptorType 16 bDevCapabilityType 4 bReserved 0 ContainerID {f8f4da75-89ce-f34e-8dcb-5467f29cbd36} Device Status: 0x0001 Self Powered Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 9 Hub bDeviceSubClass 0 bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x1d6b Linux Foundation idProduct 0x0003 3.0 root hub bcdDevice 6.01 iManufacturer 3 Linux 6.1.30-meson64 xhci-hcd iProduct 2 xHCI Host Controller iSerial 1 xhci-hcd.1.auto bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x001f bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 bMaxBurst 0 Hub Descriptor: bLength 12 bDescriptorType 42 nNbrPorts 1 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 0 milli Ampere bHubDecLat 0.0 micro seconds wHubDelay 0 nano seconds DeviceRemovable 0x00 Hub Port Status: Port 1: 0000.0203 5Gbps power U0 enable connect Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 0x000f bNumDeviceCaps 1 SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x02 Latency Tolerance Messages (LTM) Supported wSpeedsSupported 0x0008 Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 1 Lowest fully-functional device speed is Full Speed (12Mbps) bU1DevExitLat 0 micro seconds bU2DevExitLat 0 micro seconds Device Status: 0x0001 Self Powered Bus 001 Device 010: ID 0403:6001 Future Technology Devices International, Ltd FT232 Serial (UART) IC Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0403 Future Technology Devices International, Ltd idProduct 0x6001 FT232 Serial (UART) IC bcdDevice 6.00 iManufacturer 1 RFXCOM iProduct 2 RFXtrx433 iSerial 3 A1XSS661 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0020 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 90mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 2 RFXtrx433 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) Bus 001 Device 009: ID 0403:6001 Future Technology Devices International, Ltd FT232 Serial (UART) IC Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0403 Future Technology Devices International, Ltd idProduct 0x6001 FT232 Serial (UART) IC bcdDevice 6.00 iManufacturer 1 FTDI iProduct 2 FT232R USB UART iSerial 3 AI05V71S bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0020 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 90mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 2 FT232R USB UART Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) Bus 001 Device 011: ID 10c4:ea60 Silicon Labs CP210x UART Bridge Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x10c4 Silicon Labs idProduct 0xea60 CP210x UART Bridge bcdDevice 1.00 iManufacturer 1 Silicon Labs iProduct 2 Sonoff Zigbee 3.0 USB Dongle Plus iSerial 3 0001 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0020 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 2 Sonoff Zigbee 3.0 USB Dongle Plus Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) Bus 001 Device 008: ID 0bda:5411 Realtek Semiconductor Corp. RTS5411 Hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.10 bDeviceClass 9 Hub bDeviceSubClass 0 bDeviceProtocol 2 TT per port bMaxPacketSize0 64 idVendor 0x0bda Realtek Semiconductor Corp. idProduct 0x5411 RTS5411 Hub bcdDevice 1.17 iManufacturer 1 Generic iProduct 2 4-Port USB 2.0 Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0029 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 bInterfaceProtocol 1 Single TT iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 12 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 bInterfaceProtocol 2 TT per port iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x00a9 Per-port power switching Per-port overcurrent protection TT think time 16 FS bits Port indicators bPwrOn2PwrGood 0 * 2 milli seconds bHubContrCurrent 100 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0103 power enable connect Port 4: 0000.0100 power Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 0x002a bNumDeviceCaps 3 USB 2.0 Extension Device Capability: bLength 7 bDescriptorType 16 bDevCapabilityType 2 bmAttributes 0x0000f41e BESL Link Power Management (LPM) Supported BESL value 1024 us Deep BESL value 61440 us SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x00 wSpeedsSupported 0x000e Device can operate at Full Speed (12Mbps) Device can operate at High Speed (480Mbps) Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 1 Lowest fully-functional device speed is Full Speed (12Mbps) bU1DevExitLat 10 micro seconds bU2DevExitLat 1023 micro seconds Container ID Device Capability: bLength 20 bDescriptorType 16 bDevCapabilityType 4 bReserved 0 ContainerID {20b9cde5-7039-e011-a935-0002a5d5c51b} Device Status: 0x0001 Self Powered Bus 001 Device 004: ID 0bda:5411 Realtek Semiconductor Corp. RTS5411 Hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.10 bDeviceClass 9 Hub bDeviceSubClass 0 bDeviceProtocol 2 TT per port bMaxPacketSize0 64 idVendor 0x0bda Realtek Semiconductor Corp. idProduct 0x5411 RTS5411 Hub bcdDevice 1.17 iManufacturer 1 Generic iProduct 2 4-Port USB 2.0 Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0029 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 bInterfaceProtocol 1 Single TT iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 12 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 bInterfaceProtocol 2 TT per port iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x00a9 Per-port power switching Per-port overcurrent protection TT think time 16 FS bits Port indicators bPwrOn2PwrGood 0 * 2 milli seconds bHubContrCurrent 100 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0503 highspeed power enable connect Port 2: 0000.0103 power enable connect Port 3: 0000.0103 power enable connect Port 4: 0000.0100 power Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 0x002a bNumDeviceCaps 3 USB 2.0 Extension Device Capability: bLength 7 bDescriptorType 16 bDevCapabilityType 2 bmAttributes 0x0000f41e BESL Link Power Management (LPM) Supported BESL value 1024 us Deep BESL value 61440 us SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x00 wSpeedsSupported 0x000e Device can operate at Full Speed (12Mbps) Device can operate at High Speed (480Mbps) Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 1 Lowest fully-functional device speed is Full Speed (12Mbps) bU1DevExitLat 10 micro seconds bU2DevExitLat 1023 micro seconds Container ID Device Capability: bLength 20 bDescriptorType 16 bDevCapabilityType 4 bReserved 0 ContainerID {20b9cde5-7039-e011-a935-0002a5d5c51b} Device Status: 0x0001 Self Powered Bus 001 Device 003: ID 0658:0200 Sigma Designs, Inc. Aeotec Z-Stick Gen5 (ZW090) - UZB Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0658 Sigma Designs, Inc. idProduct 0x0200 Aeotec Z-Stick Gen5 (ZW090) - UZB bcdDevice 0.00 iManufacturer 0 iProduct 0 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0043 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC Call Management: bmCapabilities 0x00 bDataInterface 1 CDC ACM: bmCapabilities 0x00 CDC Union: bMasterInterface 0 bSlaveInterface 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. Hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.10 bDeviceClass 9 Hub bDeviceSubClass 0 bDeviceProtocol 2 TT per port bMaxPacketSize0 64 idVendor 0x05e3 Genesys Logic, Inc. idProduct 0x0610 Hub bcdDevice 93.04 iManufacturer 1 GenesysLogic iProduct 2 USB2.1 Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0029 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 bInterfaceProtocol 1 Single TT iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 12 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 bInterfaceProtocol 2 TT per port iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x00e9 Per-port power switching Per-port overcurrent protection TT think time 32 FS bits Port indicators bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 100 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0103 power enable connect Port 3: 0000.0503 highspeed power enable connect Port 4: 0000.0100 power Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 0x002a bNumDeviceCaps 3 USB 2.0 Extension Device Capability: bLength 7 bDescriptorType 16 bDevCapabilityType 2 bmAttributes 0x00000006 BESL Link Power Management (LPM) Supported SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x00 wSpeedsSupported 0x000e Device can operate at Full Speed (12Mbps) Device can operate at High Speed (480Mbps) Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 1 Lowest fully-functional device speed is Full Speed (12Mbps) bU1DevExitLat 8 micro seconds bU2DevExitLat 190 micro seconds Container ID Device Capability: bLength 20 bDescriptorType 16 bDevCapabilityType 4 bReserved 0 ContainerID {f8f4da75-89ce-f34e-8dcb-5467f29cbd36} Device Status: 0x0001 Self Powered Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 bDeviceProtocol 1 Single TT bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 6.01 iManufacturer 3 Linux 6.1.30-meson64 xhci-hcd iProduct 2 xHCI Host Controller iSerial 1 xhci-hcd.1.auto bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0019 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0503 highspeed power enable connect Port 2: 0000.0100 power Device Status: 0x0001 Self Powered pi@odroidn2:~$ Also modified this, in: armbianEnv.txt extraargs=usbcore.autosuspend=-1 Try also: https://www.domoticz.com/wiki/PersistentUSBDevices Als no differents Look there are only 2 usb ports funtctioning.. only otherwise there are more ports viable...:-) Try a lot other things. No luck @ all What could be wrong here? a solution?
-
libssl1.1 Not possible to install
Dombo 71 replied to Dombo 71's topic in Software, Applications, Userspace
I try this options also. Not working. Perhaps other options? Or is this just a domotcz problem? And need domoticz change something? -
Hope there is a option.. for install libssl1.1 Drive me cray. I run: ___ _ _ _ _ _ ____ / _ \ __| |_ __ ___ (_) __| | | \ | |___ \ | | | |/ _` | '__/ _ \| |/ _` | | \| | __) | | |_| | (_| | | | (_) | | (_| | | |\ |/ __/ \___/ \__,_|_| \___/|_|\__,_| |_| \_|_____| Welcome to Armbian 23.05.1 Bookworm with Linux 6.1.30-meson64 System load: 2% Up time: 31 min Memory usage: 9% of 3.69G IP: 192.168.5.70 CPU temp: 34°C Usage of /: 9% of 57G RX today: 499.3 MiB Last login: Tue Jul 18 01:39:33 2023 from 192.168.5.101 Fow my Domoticz, in need, libssl1.1 Still get an error when run: pi@Domoticz:~$ cd domoticz pi@Domoticz:~/domoticz$ ./domoticz ./domoticz: error while loading shared libraries: libssl.so.1.1: cannot open shared object file: No such file or directory pi@Domoticz:~/domoticz$ Where i google and try to find solutions.. No option to install libssl1.1 on my ondroid. [ also not with jammy ] Help please...... THANKS!!!
-
Holidays are here.. So i was thinking i going to upgrade my N2 I did this part like you say Only no luck @ all. nano 4.8 /etc/apt/sources.list deb http://ports.ubuntu.com/ bullseye main restricted universe multiverse #deb-src http://ports.ubuntu.com/ focal main restricted universe multiverse deb http://ports.ubuntu.com/ bullseye-security main restricted universe multiverse #deb-src http://ports.ubuntu.com/ focal-security main restricted universe multiverse deb http://ports.ubuntu.com/ bullseye-updates main restricted universe multiverse #deb-src http://ports.ubuntu.com/ focal-updates main restricted universe multiverse deb http://ports.ubuntu.com/ bullseye-backports main restricted universe multiverse #deb-src http://ports.ubuntu.com/ focal-backports main restricted universe multiverse I googled some thing Looks there is ubuntu in stead of armbian? I came from focal... Only what do i need tho chage without brick my N2? And i do have a working bullseye on my N2:-) I did this trick by my Xu-4 and is working fine. Some error in dutch 😞 pi@odroidn2:~$ sudo apt full-upgrade Pakketlijsten worden ingelezen... Klaar Boom van vereisten wordt opgebouwd De statusinformatie wordt gelezen... Klaar Opwaardering wordt doorgerekend... Klaar 0 opgewaardeerd, 0 nieuw geïnstalleerd, 0 te verwijderen en 0 niet opgewaardeerd. pi@odroidn2:~$ sudo nano /etc/apt/sources.list pi@odroidn2:~$ sudo apt-get update Genegeerd:1 http://ports.ubuntu.com bullseye InRelease Genegeerd:2 http://ports.ubuntu.com bullseye-security InRelease Genegeerd:3 http://ports.ubuntu.com bullseye-updates InRelease Genegeerd:4 http://ports.ubuntu.com bullseye-backports InRelease Fout:5 http://ports.ubuntu.com bullseye Release 404 Not Found [IP: 185.125.190.36 80] Geraakt:6 https://packages.grafana.com/oss/deb stable InRelease Fout:7 http://ports.ubuntu.com bullseye-security Release 404 Not Found [IP: 185.125.190.36 80] Fout:8 http://ports.ubuntu.com bullseye-updates Release 404 Not Found [IP: 185.125.190.36 80] Geraakt:9 https://repos.influxdata.com/debian focal InRelease Fout:10 http://ports.ubuntu.com bullseye-backports Release 404 Not Found [IP: 185.125.190.36 80] Geraakt:11 https://deb.nodesource.com/node_14.x focal InRelease Pakketlijsten worden ingelezen... Klaar E: De pakketbron 'http://ports.ubuntu.com bullseye Release' heeft geen Release-bestand. N: Bijwerken van de pakketlijst uit een dergelijke pakketbron kan niet veilig gebeuren en is daarom standaard uitgezet. N: Zie de man-pagina apt-secure(8) voor details over het aanmaken van een pakketbron en over de configuratie langs gebruikerskant. E: De pakketbron 'http://ports.ubuntu.com bullseye-security Release' heeft geen Release-bestand. N: Bijwerken van de pakketlijst uit een dergelijke pakketbron kan niet veilig gebeuren en is daarom standaard uitgezet. N: Zie de man-pagina apt-secure(8) voor details over het aanmaken van een pakketbron en over de configuratie langs gebruikerskant. E: De pakketbron 'http://ports.ubuntu.com bullseye-updates Release' heeft geen Release-bestand. N: Bijwerken van de pakketlijst uit een dergelijke pakketbron kan niet veilig gebeuren en is daarom standaard uitgezet. N: Zie de man-pagina apt-secure(8) voor details over het aanmaken van een pakketbron en over de configuratie langs gebruikerskant. E: De pakketbron 'http://ports.ubuntu.com bullseye-backports Release' heeft geen Release-bestand. N: Bijwerken van de pakketlijst uit een dergelijke pakketbron kan niet veilig gebeuren en is daarom standaard uitgezet. N: Zie de man-pagina apt-secure(8) voor details over het aanmaken van een pakketbron en over de configuratie langs gebruikerskant. Hope some can help this windows dombo.. Like to hear.
-
Hi i use a few years a odroid n2 and xu4. Works great, only with both boards i have trouble to upgrade to latest version. Every time i need or must upgrade i brick my board. Solution new install... So can some one tell me please, how i can upgrade to latest stable version of armbian, without, brick my system.. ___ _ _ _ _ _ ____ / _ \ __| |_ __ ___ (_) __| | | \ | |___ \ | | | |/ _` | '__/ _ \| |/ _` | | \| | __) | | |_| | (_| | | | (_) | | (_| | | |\ |/ __/ \___/ \__,_|_| \___/|_|\__,_| |_| \_|_____| Welcome to Armbian 21.08.8 Focal with Linux 5.10.81-meson64 No end-user support: built from trunk System load: 17% Up time: 1 min Memory usage: 18% of 3.61G IP: 192.168.5.70 CPU temp: 49°C Usage of /: 11% of 57G [ General system configuration (beta): armbian-config ] Thanks for the support..
-
@Werner Thanks... Is there realy no other option to upgrade? Or is there perhaps a way to upgrade to higher dico version? How is this possible that i run a disco version any way? Hope you can help me
-
Hi to all. I do use [ i do not now how] aversion that is not supported annamore: ____ _ _ _ _ ____ / ___| _| |__ (_) ___| |__ ___ __ _ _ __ __| | |___ \ | | | | | | '_ \| |/ _ \ '_ \ / _ \ / _` | '__/ _` | __) | | |__| |_| | |_) | | __/ |_) | (_) | (_| | | | (_| | / __/ \____\__,_|_.__/|_|\___|_.__/ \___/ \__,_|_| \__,_| |_____| Welcome to Armbian Disco with Linux 5.4.26-sunxi No end-user support: end of life System load: 0.07 0.19 0.24 Up time: 30 min Memory usage: 18 % of 998MB IP: 192.168.5.200 CPU temp: 42°C Usage of /: 11% of 15G Your Ubuntu release is not supported anymore. For upgrade information, please visit: http://www.ubuntu.com/releaseendoflife New release '20.04.3 LTS' available. Run 'do-release-upgrade' to upgrade to it. Only everything i try, i cannot upgrade to latest version Not working: do-release-upgrade, apget-dist-upgrade etc I try to change to normal en lts no luck. Perhaps something with changing sourelist? I am a windows noob... so hope someone can help me,,
-
Hi to all: I run a odroid N2: / _ \ __| |_ __ ___ (_) __| | | \ | |___ \ | | | |/ _` | '__/ _ \| |/ _` | | \| | __) | | |_| | (_| | | | (_) | | (_| | | |\ |/ __/ \___/ \__,_|_| \___/|_|\__,_| |_| \_|_____| Welcome to Armbian 20.11.6 Focal with Linux 5.9.14-meson64 System load: 18% Up time: 20 min Local users: 3 Memory usage: 20% of 3.55G IP: 192.168.5.70 CPU temp: 43°C Usage of /: 11% of 57G Try to install a sonso api on my system. After a reboot i get a strange error with python . I did a upgrade to some dofferent packages. No luck @ all. Now with everthing i do i get a strange error: And hwo strange there is no python 3 installed? <no Python frame> dpkg: fout bij verwerken van pakket apt-xapian-index (--remove): subproces van pakket apt-xapian-index werd script pre-removal geïnstalleerd gaf de foutwaarde 1 terug dpkg: te veel fouten; er wordt gestopt Could not find platform independent libraries <prefix> Could not find platform dependent libraries <exec_prefix> Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>] Python path configuration: PYTHONHOME = (not set) PYTHONPATH = (not set) program name = '/usr/bin/python3' isolated = 0 environment = 1 user site = 1 import site = 1 sys._base_executable = '/usr/bin/python3' sys.base_prefix = '/usr' sys.base_exec_prefix = '/usr' sys.executable = '/usr/bin/python3' sys.prefix = '/usr' sys.exec_prefix = '/usr' sys.path = [ '/usr/lib/python38.zip', '/usr/lib/python3.8', '/usr/lib/lib-dynload', ] Fatal Python error: init_fs_encoding: failed to get the Python codec of the filesystem encoding Python runtime state: core initialized ModuleNotFoundError: No module named 'encodings' Current thread 0x0000ffff87d6f010 (most recent call first): <no Python frame> dpkg: fout tijdens opruimen: subproces van pakket apt-xapian-index werd script post-installation geïnstalleerd gaf de foutwaarde 1 terug Fouten gevonden tijdens verwerken van: apt-xapian-index Verwerking werd afgebroken omdat er te veel fouten waren. E: Sub-process /usr/bin/dpkg returned an error code (1) pi@odroidn2:~$ python3 python3: error while loading shared libraries: libpython3.5m.so.1.0: cannot open shared object file: No such file or directory I try to uninstall xapian en reinstall Did this also with some some python packages.. Hope there is some support. I am a Windows noop...
-
Hi .. I try to upgrade to latest armbian. I run now bionic Only when i do sudo apt-get-dist-upgrade i get no upgrade options. I was thinking i need to chage somewhere in setting something with tls. Only... So i cannot find a wiki or a other good working how to. So please can some help me to get my xu4 update tot latest version.. Or give me a good wiki or a working how to. Thanks!!
-
630/5000Best... I have the latest version of Armbian for the Odroid N2. Running on a 64gb emmc Installed on a home automation system. Nothing else. login as: pi pi@192.168.5.70's password: ___ _ _ _ _ _ ____ / _ \ __| |_ __ ___ (_) __| | | \ | |___ \ | | | |/ _` | '__/ _ \| |/ _` | | \| | __) | | |_| | (_| | | | (_) | | (_| | | |\ |/ __/ \___/ \__,_|_| \___/|_|\__,_| |_| \_|_____| Welcome to Armbian Focal with Linux 5.6.15-meson64 System load: 39.73 47.94 41.55 Up time: 8:34 Memory usage: 96 % of 3634MB Zram usage: 100 % of 1023Mb IP: 192.168.5.70 CPU temp: 35°C Usage of /: 5% of 57G [ General system configuration (beta): armbian-config ] Last login: Wed Jun 10 23:06:00 2020 from 192.168.5.2 pi@odroidn2:~$ Everything seems to be running well, but it turns out for a few hours. Somehow, the odroid is doing something weird. After a certain time, I don't get on well with putty. It seems to be in the zram, which is 100% full. But I can't find anything there that I can do about it. Various error messages. If I do a cold reboot after that, everything will run again for a few hours. And it starts all over again. New install does the same. When i login with ftp i see a lot of big log files. [ atach ] I do not understand how to remove this files for ever. Or how this file are come there. I hope some of you can help me.. I am a windows .... Thanks Edit. Attach a big var/log sys.log file. New something smaller, cannot get the big file because ftp is not working any more .auth.log.rVJMr6 .auth.log.SpPwqz .auth.log.vCGPwk .auth.log.WxXcB2 .auth.log.XKTnuY .auth.log.xVXXz0 syslog
-
domoticz.service - LSB: Home Automation System Loaded: loaded (/etc/init.d/domoticz.sh; bad; vendor preset: enabled) Active: active (exited) since Sun 2018-01-21 10:26:21 CET; 3min 35s ago Docs: man:systemd-sysv-generator(8) Process: 6124 ExecStop=/etc/init.d/domoticz.sh stop (code=exited, status=0/SUCCESS) Process: 6159 ExecStart=/etc/init.d/domoticz.sh start (code=exited, status=0/SUCCESS) Jan 21 10:26:21 odroidxu4 systemd[1]: Starting LSB: Home Automation System... Jan 21 10:26:21 odroidxu4 domoticz.sh[6159]: 2018-01-21 10:26:21.080 Domoticz V3.8833 (c)2012-2018 GizMoCuz Jan 21 10:26:21 odroidxu4 domoticz.sh[6159]: 2018-01-21 10:26:21.080 Build Hash: 60050638, Date: 2018-01-19 13:22:13 Jan 21 10:26:21 odroidxu4 domoticz.sh[6159]: 2018-01-21 10:26:21.081 Startup Path: /home/root/domoticz/ Jan 21 10:26:21 odroidxu4 domoticz.sh[6159]: domoticz: Domoticz is starting up.... Jan 21 10:26:21 odroidxu4 domoticz[6164]: Domoticz is starting up.... Jan 21 10:26:21 odroidxu4 domoticz[6165]: Domoticz running... Jan 21 10:26:21 odroidxu4 systemd[1]: Started LSB: Home Automation System. Dear.... Perhaps you can help m with this error... Did my update/upgrade on armbian.. Only now when i run my home automation.. I get this error: Active: active (exited) And i should be: Active: active (running) When i reboot/restart there is for a few minutes running and then exited is there :-( And my home automation is top functioning grrr
-
Dear... The armbian list was there Did set your sourcelist: root@odroidxu4:~# sudo apt-get update Hit:1 http://ports.ubuntu.com xenial InRelease Get:2 http://ports.ubuntu.com xenial-security InRelease [102 kB] Hit:3 http://apt.armbian.com xenial InRelease Get:4 http://ports.ubuntu.com xenial-updates InRelease [102 kB] Get:5 http://ports.ubuntu.com xenial-backports InRelease [102 kB] Get:6 http://ports.ubuntu.com xenial-updates/main armhf Packages [599 kB] Get:7 http://ports.ubuntu.com xenial-updates/universe armhf Packages [504 kB] Get:8 http://ports.ubuntu.com xenial-updates/multiverse armhf Packages [11.6 kB] Fetched 1,422 kB in 3s (401 kB/s) Reading package lists... Done root@odroidxu4:~# sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done The following package was automatically installed and is no longer required: libllvm4.0 Use 'sudo apt autoremove' to remove it. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. root@odroidxu4:~# Looks now working ok? [ yes i did change some sourcelist and did a reboot between your posts ]
-
No change And no file you ask for.
-
give me please the standard sourcelist if you can..
-
-
-
root@odroidxu4:~# ping -c 5 apt.armbian.com PING apt.armbian.com (185.158.177.155) 56(84) bytes of data. 64 bytes from apt.armbian.com (185.158.177.155): icmp_seq=1 ttl=49 time=49.4 ms 64 bytes from apt.armbian.com (185.158.177.155): icmp_seq=2 ttl=49 time=49.9 ms 64 bytes from apt.armbian.com (185.158.177.155): icmp_seq=3 ttl=49 time=48.5 ms 64 bytes from apt.armbian.com (185.158.177.155): icmp_seq=4 ttl=49 time=49.7 ms 64 bytes from apt.armbian.com (185.158.177.155): icmp_seq=5 ttl=49 time=49.5 ms --- apt.armbian.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4002ms rtt min/avg/max/mdev = 48.511/49.454/49.962/0.559 ms root@odroidxu4:~# root@odroidxu4:~# ^C root@odroidxu4:~# ping -c 5 us.archive.ubuntu.com PING us.archive.ubuntu.com (91.189.91.26) 56(84) bytes of data. 64 bytes from hanger.canonical.com (91.189.91.26): icmp_seq=1 ttl=51 time=119 ms 64 bytes from hanger.canonical.com (91.189.91.26): icmp_seq=2 ttl=51 time=121 ms 64 bytes from hanger.canonical.com (91.189.91.26): icmp_seq=3 ttl=51 time=122 ms 64 bytes from hanger.canonical.com (91.189.91.26): icmp_seq=4 ttl=51 time=121 ms 64 bytes from hanger.canonical.com (91.189.91.26): icmp_seq=5 ttl=51 time=119 ms --- us.archive.ubuntu.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4003ms rtt min/avg/max/mdev = 119.274/120.753/122.523/1.184 ms root@odroidxu4:~# mm strange [ thanks!!] why do i get the errors:
-
root@odroidxu4:~# ping -c 5 192.168.5.1 PING 192.168.5.1 (192.168.5.1) 56(84) bytes of data. 64 bytes from 192.168.5.1: icmp_seq=1 ttl=64 time=0.595 ms 64 bytes from 192.168.5.1: icmp_seq=2 ttl=64 time=0.583 ms 64 bytes from 192.168.5.1: icmp_seq=3 ttl=64 time=0.600 ms 64 bytes from 192.168.5.1: icmp_seq=4 ttl=64 time=0.514 ms 64 bytes from 192.168.5.1: icmp_seq=5 ttl=64 time=0.539 ms --- 192.168.5.1 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4072ms rtt min/avg/max/mdev = 0.514/0.566/0.600/0.037 ms root@odroidxu4:~# root@odroidxu4:~# ping -c 5 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_seq=1 ttl=58 time=19.2 ms 64 bytes from 8.8.8.8: icmp_seq=2 ttl=58 time=18.7 ms 64 bytes from 8.8.8.8: icmp_seq=3 ttl=58 time=18.5 ms 64 bytes from 8.8.8.8: icmp_seq=4 ttl=58 time=18.3 ms 64 bytes from 8.8.8.8: icmp_seq=5 ttl=58 time=19.7 ms --- 8.8.8.8 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4005ms rtt min/avg/max/mdev = 18.318/18.900/19.701/0.509 ms root@odroidxu4:~# root@odroidxu4:~# ^C root@odroidxu4:~# ping -c 5 xhamster.com PING xhamster.com (88.208.29.24) 56(84) bytes of data. 64 bytes from 88.208.29.24: icmp_seq=1 ttl=54 time=20.2 ms 64 bytes from 88.208.29.24: icmp_seq=2 ttl=54 time=20.1 ms 64 bytes from 88.208.29.24: icmp_seq=3 ttl=54 time=18.9 ms 64 bytes from 88.208.29.24: icmp_seq=4 ttl=54 time=12.5 ms 64 bytes from 88.208.29.24: icmp_seq=5 ttl=54 time=19.5 ms --- xhamster.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 12.512/18.257/20.239/2.910 ms root@odroidxu4:~# root@odroidxu4:~# nslookup xhamster.com Server: 8.8.8.8 Address: 8.8.8.8#53 Non-authoritative answer: Name: xhamster.com Address: 88.208.29.24 Name: xhamster.com Address: 88.208.18.30
-
edit the post
-
the router is 192.168.5.1 root@odroidxu4:~# route -v -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.5.1 0.0.0.0 UG 0 0 0 enx001e06325acc 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 enx001e06325acc 192.168.5.0 0.0.0.0 255.255.255.0 U 0 0 0 enx001e06325acc root@odroidxu4:~#
-
root@odroidxu4:~# ifconfig enx001e06325acc Link encap:Ethernet HWaddr 00:1e:06:32:5a:cc inet addr:192.168.5.70 Bcast:192.168.5.255 Mask:255.255.255.0 inet6 addr: fe80::21e:6ff:fe32:5acc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1839 errors:0 dropped:0 overruns:0 frame:0 TX packets:1887 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:219713 (219.7 KB) TX bytes:1677680 (1.6 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:68 errors:0 dropped:0 overruns:0 frame:0 TX packets:68 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1 RX bytes:4628 (4.6 KB) TX bytes:4628 (4.6 KB) root@odroidxu4:~# cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 8.8.8.8 nameserver 192.168.5.1 root@odroidxu4:~# root@odroidxu4:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default gateway 0.0.0.0 UG 0 0 0 enx001e06325acc link-local * 255.255.0.0 U 1000 0 0 enx001e06325acc 192.168.5.0 * 255.255.255.0 U 0 0 0 enx001e06325acc root@odroidxu4:~# Thanks for the fast response
-
Dear all. After a update/upgrade and dist-upgrade.. a few weeks a go i think there is something going wrong on my Xu4 After every update and upgrade i still get the same errors: root@odroidxu4:~# sudo apt-get update Err:1 http://apt.armbian.com xenial InRelease Could not resolve 'apt.armbian.com' Err:2 http://us.archive.ubuntu.com/ubuntu xenial InRelease Could not resolve 'us.archive.ubuntu.com' Err:3 http://us.archive.ubuntu.com/ubuntu xenial-security InRelease Could not resolve 'us.archive.ubuntu.com' Err:4 http://us.archive.ubuntu.com/ubuntu xenial-updates InRelease Could not resolve 'us.archive.ubuntu.com' Err:5 http://us.archive.ubuntu.com/ubuntu xenial-proposed InRelease Could not resolve 'us.archive.ubuntu.com' Err:6 http://us.archive.ubuntu.com/ubuntu xenial-backports InRelease Could not resolve 'us.archive.ubuntu.com' Reading package lists... Done W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/xenial/InRelease Could not resolve 'us.archive.ubuntu.com' W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/xenial-security/InRelease Could not resolve 'us.archive.ubuntu.com' W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/xenial-updates/InRelease Could not resolve 'us.archive.ubuntu.com' W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/xenial-proposed/InRelease Could not resolve 'us.archive.ubuntu.com' W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/xenial-backports/InRelease Could not resolve 'us.archive.ubuntu.com' W: Failed to fetch http://apt.armbian.com/dists/xenial/InRelease Could not resolve 'apt.armbian.com' W: Some index files failed to download. They have been ignored, or old ones used instead. root@odroidxu4:~# sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done The following package was automatically installed and is no longer required: libllvm4.0 Use 'sudo apt autoremove' to remove it. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. root@odroidxu4:~# Upgrade: root@odroidxu4:~# sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done The following package was automatically installed and is no longer required: libllvm4.0 Use 'sudo apt autoremove' to remove it. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. root@odroidxu4:~# When i try to install a new package same trouble.. So i was thinking my source list is out date: Update different lists from the internet with a sourcliste gen etc etc.. No luck at all. My system: root@odroidxu4:~# ^C root@odroidxu4:~# cat /etc/os-release NAME="Ubuntu" VERSION="16.04.3 LTS (Xenial Xerus)" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 16.04.3 LTS" VERSION_ID="16.04" HOME_URL="http://www.ubuntu.com/" SUPPORT_URL="http://help.ubuntu.com/" BUG_REPORT_URL="http://bugs.launchpad.net/ubuntu/" VERSION_CODENAME=xenial UBUNTU_CODENAME=xenial root@odroidxu4:~# I think perhaps something can be wrong with my internet connection. Because my home-automation should send emails from the Xu4 and the system says send mail.. Only i get no mail. In my router the xu4 have a internet connection.. [ i see the xu4 ] Is there perhaps some help for me I a a noob... so please.. Thanks guys!! Edit: Did try the config... No internet so that is the problem.. Only how to resolve? : root@odroidxu4:~# armbian-config Warning. Configurator can't work properly without internet connection. Press CTRL C to stop to stop or any key to ignore and continue.
-
Thanks.... Very clear how you tell this... I let the swap behind me... Sorry for your time.!!!