Mohammad Mubin Posted August 8, 2016 Share Posted August 8, 2016 I Attached ili9341 but i ran the command confbmap 2 8 and then ctrl + alt + f2 the lcd was showing to enter password i did but now i see this never goes into gui any fix? Link to comment Share on other sites More sharing options...
Mohammad Mubin Posted August 8, 2016 Author Share Posted August 8, 2016 Picture sent from phone Link to comment Share on other sites More sharing options...
shahidali55 Posted August 9, 2016 Share Posted August 9, 2016 What is the resolution of that screen ? What version of Armbian are you running ? Please provide the output from uname -a Link to comment Share on other sites More sharing options...
tkaiser Posted August 9, 2016 Share Posted August 9, 2016 the lcd was showing to enter password i did but now i see this never goes into gui any fix? Obviously you use a wrong OS image (one for any of the larger Orange Pis that are allowed to clock up to 1296 MHz). If you are able to login via serial console or network (both active by default) then it's easy: Adjust /etc/defaults/cpufrequtils so that the maximum is 1200 MHz and relink /boot/script.bin to /boot/bin/orangepione.bin and reboot. Or start from scratch using the right OS image Whether you will be able to use Armbian with GUI on such a small SPI display I don't know. Link to comment Share on other sites More sharing options...
Recommended Posts