• Posts

  • Joined

  • Last visited

Profile Information

  • Gender

Recent Profile Visitors

1556 profile views
  1. Hello again to everybody. Back to the group after a while. My MX10 TV Box broke down and needed to be replaced, so I had to way for the spare one. I can confirm that there are at least two models of MX10 4/32 The first one came with wifi chip rtl8723bs and ran with the rk3328-a5x-mx10.dtb. out of the box, with the only inconvenient of red led light instead of blue and I remote control not working. It has no Bluetooth so nothing to do. You can edit the source disk and add opp-cpu 1392 and change trip points for higher speed and it works The second one has come with ssv6051 wifi chip and runs with rk3328-mx10.dtb, rk3328-mx10-fast.dtb and rk3328-mx10-slow.dtb. Each one has its failures. rk3328-mx10.dtb runs out of the box with same behaviour as the previous rk3328-a5x-mx10.dtb - red led and no IR command. It is also the slowest one in memory and disk operations. The rk3328-mx10-fast.dtb runs quicker - and hotter (reaches 95... 99.C) shows blue led but does not power off. Can anyone help me with fixing the no-poweroff bug? It should be in the design. TIA
  2. Be carefull with changing /system/xbin/su as i've read sometimes it blocks Android boot.
  3. I had seen it, but It refers to tv boxes booting armbian, with lots of issues that are solved at this moment. I mean a list with references to the dtbs used to success and links to customized dtbs. This way we'll be able to gather a huge library of models and their device trees. Due to the great differences between amlogic and rockchip insiders, I'd rather create two different topics; and only successful or almost successful (all working But BT and / or Wifi) configurations should be póster there. Everybody will be able to succesfully install armbian reading that thread if owns a box in the list. Meanwhile, we'll continue stabilizing the kernel adding modules and testing dtbs.
  4. Perhaps it would be a good idea to open a new topic to sumarize the diferent rk3328 tv boxes and the range of integrated peripherals working, pointing model | wifi | armbian image | dtb (opcional link) | custom configuración (link) | malí working. My case Mx10 | rtl8723bs not working | 5.68 | rk3328-mx10.dtb | standard | mali not working It would be great to have a brief topic with the successful works from this thread and the state of works in progress. So all of us shall be able to build a working image for most models. And it will help to decide which model to buy.
  5. Do you mean running from boot partición? Can you provide a link to that documentation?
  6. Working with 5.68 image. I found it more stable than 5.71. None of them work with remote commander to switch mx10 on. I will give a try to 5.73.
  7. I know, but not working out-of-the-box for mx10, as in mx10 SD is /dev/blkmmc0 and internas eMMC is /dev/blkmmc2 Ddbr ran perfectly and I will try to merge the Ddbr media detection into to get an universal installer which autodetect blkmmcX as ddbr does. Any warning about not damaging the loader?
  8. Now I am working on the Armbian installation into MX10's EMMC. I will keep you informed.
  9. Congrats to @slaven and @armar!!! Good job @mb16 !! Can you tell me the version of A5X? A5X Plus (2/16) or a5X Max (4/32)?
  10. For those of you interested in running Armbian and compiling kernel within MX-10 TVBOX (working with cheap MX-10 4/32 Oreo 8.1) Step 1: Burn into SD Step 2: Change FDT in BOOT/extlinux/extlinux.conf to FDT /dtb/rockchip/rk3328-box-mx10.dtb Step 3: Insert in TVBOX | First run | Create user | sudo apt update && sudo apt upgrade Step 4: git clone Step 5: apt install libncurses5-dev (for make nconfig) Step 6: Use attached configXXXXXX file as .config Step 7: make nconfig (here you can adjust your kernel config) Step 8: F6 Save as .config Step 9: make all (I use make -j 4 all to launch 4 prcesses and it runs for about 1 hour) Step 10: Backup full /boot folder Step 11: sudo make install Step 12: sudo make config_install Step 13: Modify BOOT/extlinux/extlinux.conf to boot new kerner (4.1.154) LABEL Armbian LINUX /vmlinuz-4.4.154 INITRD /uInitrd FDT /dtb/rockchip/rk3328-box-mx10.dtb APPEND root=LABEL=ROOTFS rootflags=data=writeback rw console=uart8250,mmio32,0xff130000 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes net.ifnames=0 Ready to reboot config20190113
  11. How to extract DTB from an RK3328 TVBOX The DTB is in the resource partition and it's less than 100 KB long in size. With this scripts you can get it from a TVBOS. I've enabled USB debugging and Internet ADB in developer options within TVBOX setup. Change the IP in connect to fit your environment ubuntu@ubuntu-Ci5:~$ adb connect connected to ubuntu@ubuntu-Ci5:~$ adb shell rk3328_box:/ # cd data rk3328_box:/data # cd media rk3328_box:/data/media # cd 0 rk3328_box:/data/media/0 # cd Download rk3328_box:/data/media/0/Download # dd if=/dev/block/by-name/resource of=resource.img bs=100k count=1 1+0 records in 1+0 records out rk3328_box:/data/media/0/Download # exit ubuntu@ubuntu-Ci5:~$ adb pull /data/media/0/Download/resource.img 393 KB/s (102400 bytes in 0.254s) ./ resource.img And you get the dtb in the dtb folder
  12. Hi @balbes150 Here you have my mx-10 internal dts mx-10-from-box.dts
  13. Hi @balbes150 Not mine. Here you can see. ubuntu@ubuntu-Ci5:~$ adb connect connected to ubuntu@ubuntu-Ci5:~$ adb shell rk3328_box:/ # lsmod Module Size Used by 8723bs 1400585 0 rk3328_box:/ # Here it use rtl8723bs