• Posts

  • Joined

  • Last visited

Posts posted by Peyton

  1. I flashed back android and Armbian buster with Linux 5.7.2-arm-64 (old version which i found on internet) and it works on emmc.. It's a bit frustrating that the latest available isn't working anymore on tv boxes that was working before..

    Can i manually update to 5.9 kernel ? What do i have to do ? I remember some swapping file on FAT partition. Do someone remember what to do ? Thanks.

  2. Hi there,

    I was a happy user of armbian balbe150's build and wanted to update to the latest one as i was on a very early kernel.


    I tried to push it on my box freshly factored by default usb burning tool and android img from mecool. Install SD as usual with the settings according to the first post of balbe thread (it changed with the u boot) but after installing on emmc i'm stuck at the u boot and don't know why as it was working correctly on previous builds.


    If i put SD back it boot right away on it. Guess it is a emmc boot number or something wrong like that.


    If i do lsblk i can see emmc 0 (sd) and emmc 1 (real emmc)


    Do you guys had the same prob ? i wish i had never wanted to upgrade and flash android back.


    Ps : I don't have the previous img on my PC

  3. same as headless server. You just have to run startx to go on desktop if i remember right.. (i'm on headless on x96 mini.. It's not a good chip for desktop version too weak imo).

  4. 6 hours ago, dsh said:



    I installed on X96 Mini (P281). 


    when I try to install to internal it says "UNABLE TO FIND EMMC" and lsblk shows only thumb drive and zram[0,1].


    Why my emmc doesn't show?


    I've used Armbian_20.05.0-trunk_Arm-64_focal_current_5.5.1_20200227

    I have a 2GB/16GB and i installed it yesterday with buster no desktop on emmc. I tried with bionic and i add a problem with sudoer.

  5. On 11/15/2019 at 3:21 PM, balbes150 said:

    Important. These images do not yet have new scripts to install the system in eMMC for AML and rk3328. Therefore, do not use these images to install in eMMC on AML models and on RK3328.

    Shame on me. I tried to upgrade my km8p from scratch from this image and i didn't understand why it bricked 2x my tvbox before seeing that line.. :) Please don't hesitate to precise when it will be ready. Thanks ! :)

  6. 16 hours ago, srx said:

    Thank you for all your good work.

    Running Debian Buster converted to Devuan Beowulf (debian without systemd) on Mecool KM9 using meson-g12a-sei510.dtb

    Wifi and BT are not working. Everything else is working I think.


    I have one major issue.

    Looks like IPv6 is disabled in kernel (at least in 5.99, that is the latest in the repo). That is not good. I would like to see it enabled. IPv6 is essential feature that should not be disabled.

    I am unable to connect to some services because of that.

    If for some reason you want to disable IPv6, do it in sysctl.conf. That way we can enable it without replacing/compiling kernel.

    At the moment there is no /proc/sys/net/ipv6/* so not possible to enable.


    I had one other problem but that just got sorted... Yandex disk over quota and MEGA out of date.

    MEGA is updated again and all is fine :)

    Hi, i have the same device and use it with x96max iii dtb. I previously used the same dtb as you. Did you manage to install it on the emmc ?? It failed at boot and i have to restore it to android to make it works again. Thanks.



  7. On 10/18/2019 at 12:33 PM, guidol said:

    T95K Pro:

        _    __  __ _     ____ _ ____
       / \  |  \/  | |   / ___/ |___ \
      / _ \ | |\/| | |  | |  _| | __) |
     / ___ \| |  | | |__| |_| | |/ __/
    /_/   \_\_|  |_|_____\____|_|_____|
    Welcome to Debian Buster with Armbian Linux 5.4.0-rc3-aml-g12
    package bsp-kernel[5.98] u-boot[5.98] dtb[Khadas VIM2] firmware[5.98] config[5.98]
     _____ ___  ____  _  __     ____  ____   ___
    |_   _/ _ \| ___|| |/ /    |  _ \|  _ \ / _ \
      | || (_) |___ \| ' /_____| |_) | |_) | | | |
      | | \__, |___) | . \_____|  __/|  _ <| |_| |
      |_|   /_/|____/|_|\_\    |_|   |_| \_\\___/
    Welcome to Ubuntu Bionic with Armbian Linux 5.4.0-rc3-aml-g12
    package bsp-kernel[5.98] u-boot[5.98] dtb[Khadas VIM2] firmware[5.98] config[5.98]


    Is it normal you use khadas vim2 dtb for your T95K pro ?

  8. On 6/29/2019 at 7:00 PM, balbes150 said:

    Try all the options dtb g12*

    Did it. Seems to be working on SEI Robotics SEI510 dtb. Great ! Thanks.


    Just to be sure no hardware is missing do i have to type dmesg and check what is red like that ?

    [    3.750403] dwc3 ff500000.usb: Failed to get clk 'ref': -2

    [    9.035664] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4335-sdio fo                                     r chip BCM4335/1
    [    9.036436] usbcore: registered new interface driver brcmfmac
    [    9.040954] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac4335-                                     sdio.bin failed with error -2

    [   10.044168] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x                                     50


    or another command is more precise ? I don't have a clue about the result except it seems to concern usb port.



  9. On 6/19/2019 at 5:01 PM, Peyton said:

    Don't know. I saw ppl with km9 flashing km3 but it could brick your device. If you have usb/usb cable you can flash it with USB_Burning_Tool


    km9 aosp :


    original km3 :


    For your info i've just tried with Armbian_5.88_Aml-g12_Debian_buster_default_5.1.0-rc1_20190609.img and it's the same..


    Boot without any network interface except lo. :(

    Do km9 has any chance to work in the near future or do i have to forfeit and use it as android tv box as it's not working with meson-g12a-x96-max.dtb ?


    How could we help by extracting file or such Balbes150 ? Thanks.