[H20 Box with RK3228A bricked]

Hi @guitoscan, thanks for your work. Its possible to boot into multitool. The trick is to boot into android recovery and from this point into multitool. I hope that helps.

[H20 Box with RK3228A bricked]

@SteeMan Thanks for your answer. Is there any guide how I can deliver what he needs? I have never done something similar before.

[CSC Armbian for RK322x TV box boards]

Am 3.9.2023 um 10:23 schrieb fabiobassa:

@Jumperbillijumper from that link It seems t'ha t you already adked the same quesion in that thread and jock ( the same jock that is the author of all this stuff ) aleady answered there.

 

But nobody answered my question. So its not possible to get it running with armbian?

[CSC Armbian for RK322x TV box boards]

@fabiobassa Thanks for your answer. I have the same box like this guy here:

 

 

I hope that helps.

 

Regards

[CSC Armbian for RK322x TV box boards]

Hi, does anyone have a working h20 box with armbian? I got one and its not actually working with armbian.

[Amlogic S905W2 64bit Cortex A35]

Thanks for your answer @Devmfc. Where can I find your Github to try that?

[H20 Box with RK3228A bricked]

I got the same box. Thanks to your tipp, I could boot multitool. I try to make a backup of emmc, but it holds by about 6%. After that I try to boot with the same method armbian (via SD Card), but I don't get a picture. Any hints?

[Can't boot with 23.05 or later builds on s905x2 (g12a) or s905x3 (sm1)]

@tgillett do you find a way to get S905w2 running? I found a working dtb file but no matching u-boot.ext file.

[Amlogic S905W2 64bit Cortex A35]

Thanks @Igranie. I got the DTB! But now I neet a u-boot.ext file 😕

[meecool m8s pro w (s905w+2gb) no /dev/data]

16 minutes ago, guidol said:

Some say you have press the menu-button while poweron amd some say you have to short the reset pins inside the deivice:
https://forum.freaktab.com/forum/tv-player-support/amlogic-based-tv-players/s905/others-ac/firmware-roms-tools-bj/743742-mecool-m8s-pro-w-reset-pins

https://www.reddit.com/r/AndroidTV/comments/8jv1yf/q_mecool_m8s_pro_w_bootloop/

 

 

 

Wow nice. Thank you very much! Menu button saved my saturday.

[meecool m8s pro w (s905w+2gb) no /dev/data]

My Mecool M8S PRO W Box is bricked now. Thats very curious, because I never try to install it to emmc. I only use the aml autoscript.zip and after that it was bricked. Do you know how to flash it with old firmware? I don't find a button to bring it in recovery mode.

[Armbian for Amlogic S9xxx kernel 5.x]

Hi,

 

I use this Box from Gearbest: https://www.gearbest.com/tv-box/pp_736121.html?wid=1433363&lkid=21183923

 

I got this Box running with "meson gxl-S905W-p281" DTB and the newest kernel. My problem is, that I have no wlan installed. I found no dtb which is running and where wlan works.

 

I opened the box and found out, that wlan chip "SV6051P" is on the board. Maybe a person also have a problem with this wlan chip and can tell me which dtb/driver I should use.

 

Thanks!