Jump to content

xwalter

Members
 View Profile  See their activity

  • Posts

    98

  • Joined

  • Last visited

 Content Type 

Posts posted by xwalter

    Wifi Access Point

    in Allwinner sunxi

    Posted

    ok guys   :thumbup:

    I did as you told me and follow the Igor post ....

    I start my scanner on android phone and I see the wifi net , and also I'm able to connect it 

    The info are ....

    Access Point  :  MySystemWifi
MAC Address   :  the MAC of the wlan0
Device        : FN-LINK TECHNOLOGY LIMITED
Safety        : [WPA2-PSK COMP] [ESS]
Channel       : 5                              (as in the hostapd.conf)
Signal        : -26 dBm                        ( not so bad for the moment)
Connection time : 72 Mbps

TCP/IP Informations
MAC ADDRESS  : **********
IP           : 192.168.1.5
Netmask      : 255.255.255.0
Gateway      : 192.168.1.1
DNS 1        : 192.168.1.1
DNS 2        : 0.0.0.0
Server DHCP  : 192.168.1.1

    What to say guys , first of all  BIG THANKS TO ALL ;)

    The eth0 is connected and internet is running ,

    Now I have to test the connections . Into the orange pi I will write a tcp server and in android or desktop I will write a client .

    If the data exchange well I have resolved a lot of troubles .

    ciao 

    Walter

    1

    Wifi Access Point

    in Allwinner sunxi

    Posted

    Igor ...here you wrote 

    2-Link /etc/network/interfaces.hostapd to /etc/network/interfaces

    What does it mean, what to write and where ?  

    I'm compiling the go.sh .....

    But where to add  " op_mode=2 " .....inside hostapd.conf which is packed in your hpstapd project , and then go.sh again ?

    0

    Armbian SD card backup

    in Beginners

    Posted

    tkaiser, thanks for yours preciouses info.

    I made this way 

    dd if=/dev/sdh of=/dev/sdb

    from 8 Gb --> 8 Gb , it seems to work well .But long time and then I did also 

    dd if=/dev/sdh of=/home/walter/Armbian_backup/Armbian_bck.img

    on Ubuntu ,and now I have the complete image in less time . I hope to restore I will type

    dd if=/home/walter/Armbian_backup/Armbian_bck.img of=/dev/sdh 

    or I copy the image on windows and I will use Win32ImageWriter 

     

    Ok guys , now I'm cool ..... :)

    0

    Armbian SD card backup

    in Beginners

    Posted

    I did the same job under Ubuntu desktop pc but nothing 

    dd if=/dev/sdb1 of=/dev/sdg1

    where 

    sdb1= sds card that I use with orange pi 

    sdg1= new sd card where I want to put the clone 

    I don't want to believe that here you are a lot of wizard in linux and nobody know how to clone an sd card ..... 

    0

    backup & restore

    in Beginners

    Posted

    I think there are too much confusion .....I try but it doens't work 

    Could someone reorganize this article and write the procedure as well ?

    Image of our orange pi is very important ....I have also GParted , What Can I use it ?....to format ?

    0

    Armbian SD card backup

    in Beginners

    Posted

    well. ....I would like to create an sd card as backup completed of system ,programs, and datas.

    Try to image ....now I use an sd card to start armbian and I have already installed a lot of programs, services, netbeans project and else.

    If the card crashes ?  I have to reinstall all from the beginning ....or not? 

    But if I have my copy of the card I just change the sd card and start without any problem..... 

    I hope now is clean what I'd like to do :(

    0

    Armbian SD card backup

    in Beginners

    Posted

    @wildcat

    How to install SD Card Copier on Armbian ? 

    I don't have in accessories list .... :(

    I have inserted my new SD card into an USB adapter and then plugged into my orange pi

    With GParted I can see the new card ...and now ? 

    0

    Armbian SD card backup

    in Beginners

    Posted

    hello guys !!!

    I want to make a backup of my sd card with armbian and other installed on it .

    In windows not possible because the ext3-4 format of the card . In ubuntu I can see the armbian file system into the card but not copy because I don't have permission

    So , I put again the card into my orange pi and I type sudo su and then password . I tyoe also sudo -s but nothing . Pratically some folders are not "visible" 

    Do you have any suggestion?

    ciao 

    Walter

    0

    OPI ONE wireless success

    in Reviews, Tutorials, Hardware hacks

    Posted

    @rodolfo 

    I know you like me ....but at the moment I'm waiting for a dongles , differents kinds of them also to use on kali .

    But now I have the orange pi plus 2 with on board wifi and I cannot test your code ....I mean I have tested but I fail because I don't have the dongle .

    Anyway , don't worry because I will test soon and start to run android wifi client connected to orange pi and manage the GPIO over wifi ..... ;)

    At the moment I'm installing all I need on armbian and it seems to run well , apache2, mysql, samba, phpadmin and more .GPIO's are running well too. 

    Just the fuckin' wifi but  I think positive and I exchange energy with the universe , so because I'm sure to get satisfations for the next future . 

    ciao 

    Walter

    0
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines

  I accept