• Content Count

  • Joined

  • Last visited

Everything posted by constantius

  1. Works with Armbian images to Orange Pi PC ( Ubuntu 18.04 and 20.04 -XFCE 4.12 4.14 GUI ( Debian not tested ) You have to up down CPU frequencies from 1400MHZ to 1296MHZ Best regards
  2. hello. Thanks for reply. Never mind the problem Starting kernel ... [ 29.347708] EXT4-fs error (device mmcblk1p1): htree_dirblock_to_tree:1004: inode #35260: comm find: Directory block failed checksum [ 29.379325] EXT4-fs (mmcblk1p1): Remounting filesystem read-only [ 29.380061] EXT4-fs error (device mmcblk1p1): ext4_journal_check_start:83: Detected aborted journal [ 30.096180] EXT4-fs error (device mmcblk1p1): htree_dirblock_to_tree:1004: inode #35318: comm find: Directory block failed checksum [ 30.212107] EXT4-fs error (device mmcblk1p1): htree_dirblock_to_
  3. My picocom output " adek@PentiumG3440:~$ picocom -b 1500000 -r -l /dev/ttyUSB0 picocom v3.1 port is : /dev/ttyUSB0 flowcontrol : none baudrate is : 1500000 parity is : none databits are : 8 stopbits are : 1 escape is : C-a local echo is : no noinit is : no noreset is : yes hangup is : no nolock is : yes send_cmd is : sz -vv receive_cmd is : rz -vv -E imap is : omap is : emap is : crcrlf,delbs, logfile is : none initstring : none exit_after is : not set
  4. good evening - I did what you recommnad - I have Orange Pi4 without EMMC. Output from putty MMC@fe320000 :1 and sdhci@fe330000: 0 DDR version 1.24 20191016. Device is tried boot from emmc but there is no emmc. SDHCI error card did not respond to voltage select. I have changed setnev devnum 0 - device not boot at all. What is wrong?
  5. I have a question. Because there is a big mess in the naming of the first Orangepi series. I have a board with orangepi mini 2 image working. Archived Armbian 5.05 kernel 3.4.119. Orangepi pi 2 images do not launch. In appearance and specifications, the Orangepi PC 2 and mini 2 are almost identical. However, the specification for the mini 2 exists, although the manufacturer himself does not provide it on its main website. Could you add an introduction to the orange pi mini 2 board, with the old 3.4 kernel, so that you can build a system? Or may
  6. Hello I think there is strange behawior in N2 board. In default cpu frequency script settings.: setenv max_freq_a73 "1800" htop and xfce4-cpu-monitor show 1900MHZ for A73 When i changed it to setenv max_freq_a73 "1908" there is 1800MHZ in htop and xfce-cpu-monitor. I have also N2+ board and there is everything ok
  7. The N2 plus set to 2.4GHZ + 2.0GHZ works like a storm on the manufacturer's ubuntu firmware. I did not even try Armbian because there was no image that would support such frequencies. But it would be nice to support N2 +. I ordered fan. It works when you rich 65 degrees C
  8. Have it installed. Help almost nothing
  9. Hi The problem with NXP I.Mx 8M cpu is lack of XORG 3D GPU support. Driver does not work. only 2D driver works. You can run XFCE and MATE destop without play video. ( video very often hangs system ) . Wayland 3D driver works with weston pulpit. But weston is on early stage of build. In fact, there is no multitasking. Works similar to AndroidTV or something like that.
  10. pine 64so Pine64, bananapi M64 images 19.11.3, GUI XFCE 4.12 dont not run after upgrade images 20.02 GUI does not work from begining after installed. Never mind i build 19.11.5 kernel 5.4.18 and works
  11. Hi Embest provides support for maaxboard. You can downlaod image from their dropbox public site Weston wayland with 3d gpu driver and Xorg only 2D support ( MATE XFCE4 ). I think the worse problem is lack of 3D driver to Xorg for NXP i.MX 8M Vivante GPU. Best regards
  12. I would like to inform. There is debian 10 Weston 5.0 image avalaible to download on embest dropbox public site. Xorg can be installed and Xwayland but 3d driver is disabled. Wayland works with Weston and gdm3 display manager. If you prefer Xorg you can install xfce4 or mate desktop and lightdm display. If lightdm does not work properly please run startx service from terminal. Best regards
  13. Hi I see that you have added Orange pi 4 SBC. You can also add this device as suitable for testing .: I have successfuly flashed on eMMC this SBC img from orange pi RK3399 first realese. Linux orangepi 4.4.174-rk3399 #31 SMP Sun Feb 10 00:37:23 CET 2019 aarch64 aarch64 aarch64 GNU/Linux Works perfactly ( as suitable for test
  14. thanks I gave it only for information. Embest company has announced that they will do a Debian port. I built the minimal-core yocto image myself. It lasts on a dual-core cpu haswell. Building an image from Gui is necessary to compile 2000 packages in yocto. I just gave the embest that there is something like armbian. They didn't know that such a thing existed. That's all. I didn't mean to do something for them for free. They should apply themselves if they want to. Support is expensive, i know.
  15. Yes i know. But maaxboard cost 79 dollars. Solid runs sbc extremly cost high
  16. Hello. Information to Igor. I sent information about armbian to Embest (maaxboard manufacturer). They told me it was very interesting. I don't know if they will apply, it may be so. I have sent similar information to iWave (india) and Phytec (germany) which has also released sbc on NXP. SBC producers based on NXP cpu are based only on Yocto. And this is not easy and time consuming. I just inform you that if someone came to know where it came from. I did not suggest but you could do them for a fee, not free.
  17. Is there anyone from the armbian team interested in making img (I'd prefer ubuntu 18.04) to the maaxboard. I have such a board and I can borrow it for the time of testing the system. If so, please provide an address. Maaxboard 2GB RAM boot from sd-card, NXP i.MX 8M - Cortex-A53 Quad-Core 1.300MHZ ( it can run 1.5Ghz) I have added solid fan.
  18. Hi Can I setup A64 cpu frequency in bananapiM64 (images taken from pine64 classic ) at 1150MHZ? Now is 1010Mhz. Armbian 19.11.3 Pine64 Bionic current kernel 5.3.9. I have solid fan and this frequency is low.
  19. This does not work. I think you are right... Connection sometimes ends earlier. that maybe differenf issue. I have img build earlier myself with 5.05 kernel Armbian 5.77 - that works
  20. yes etho is disabled after reboot and even earlier before reboot when i tried do something what need internet - for example do command ping
  21. I have build myself Ubuntu 18.04 version for that board. Kernel 5.4.6. ( 19.11.5 ) But eth0 does not work. The same situation as But i have img with 5.77 Armbian ubuntu 18.04 kernel 5.0.5 and that is working. It is strange. Kernel 5.0.5 has no problem and 5.4.6 not. Settings static IP help nothing... eth0 is not recognize. By the way - Happy New Year 2020 to Armbian Team
  22. Will there be support for the RK3399PRO processor? e.g. for a Rocki pi N10 SBC?
  23. Ubuntu LTS 20.04 will probably have XFCE 4.14, which is based on GTK3. I have XFce 4.14 installed on an x86 Arch Linux machine. Unfortunately, the GUI is heavy. Requires memory resources and a good graphics card. I have a question. In connection with the upcoming 20.04 release, would it not be better to Armbian switch to LXQT as the basic GIU. It is lighter and faster. thanks
  24. For S905X3 Performance can be high. I have a ZTE smartphone on an Unisoc SC9863A chip octa core cortex-A55 1.6Ghz. The performance is amazing. I don't play games. The Amlogic S905X3 has four cores less. It depends if androidTV how it is optimized and whether it is loaded in 64 bit. And most often with companies like Vontar, Wechip Mecool it is poorly done or not at all, and is not Google certified. Beelink and Minix provide certification, support and upgrade ...
  25. Hi Which one you ordered? Vontar X96 Air , Wechip V9 or Beelink GT1 mini 2 ? Or somone else? Vontar is the cheapest. Maybe I could buy one too. The same. Then you could think of armbian on it and support for this model.