Maker39

No dmesg after armbian-install [ 103.467966] mmc_host mmc2: Bus speed (slot 0) = 2343750Hz (slot req 400000Hz, actual 390625HZ div = 3) [ 103.528295] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 103.532463] blk_update_request: I/O error, dev mmcblk2, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [ 103.532582] Buffer I/O error on dev mmcblk2, logical block 0, lost async page write dmesg after armbian config/... boot from eMMC-system on eMMC [ 81.469807] mmc_host mmc2: Bus speed (slot 0) = 2343750Hz (slot req 400000Hz, actual 390625HZ div = 3) [ 81.530225] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 81.534394] blk_update_request: I/O error, dev mmcblk2, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [ 81.534484] Buffer I/O error on dev mmcblk2, logical block 0, lost async page write [ 81.842872] blk_update_request: I/O error, dev mmcblk2, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 3 prio class 0 [ 81.842943] Buffer I/O error on dev mmcblk2, logical block 0, lost async page write [ 81.843012] Buffer I/O error on dev mmcblk2, logical block 1, lost async page write [ 81.843031] Buffer I/O error on dev mmcblk2, logical block 2, lost async page write [ 81.843230] blk_update_request: I/O error, dev mmcblk2, sector 15269864 op 0x1:(WRITE) flags 0x800 phys_seg 3 prio class 0 [ 81.843250] Buffer I/O error on dev mmcblk2, logical block 1908733, lost async page write [ 81.843278] Buffer I/O error on dev mmcblk2, logical block 1908734, lost async page write [ 81.843293] Buffer I/O error on dev mmcblk2, logical block 1908735, lost async page write [ 81.858078] blk_update_request: I/O error, dev mmcblk2, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [ 81.858149] Buffer I/O error on dev mmcblk2, logical block 0,

* don't set any options https://paste.armbian.com/nuquzizino * emmc-pins alone https://paste.armbian.com/ravorodada * emmc-pins + emmc-ddr-ph45 https://paste.armbian.com/didajaqeko * emmc-pins + emmc-ddr-ph180 https://paste.armbian.com/yiqutaxaqi * emmc-pins + emmc-hs200 only "Install/update bootloader on SD/eMMC" option available

Wow !!! it's magic ! I have WiFi

@jockled-con6 is selected armbianmonitor -u uploaded to http://ix.io/4ilG Tests with rk322x-config i can do it later

@jockYes, multitool able access the eMMC. Erase and burn image. Android could not be burned into this board. Flash tool cannot read IDB. I think that the eMMC is faulty. Multitool has some testing tools for eMMC ? The question remains why Wifi esp8089 is not seen ?

@jockI try many images, last loaded Armbian 23.02.0-trunk Kinetic with Linux 6.0.11-rk322x dmesg after armbian-install [ 239.317263] mmc_host mmc2: Bus speed (slot 0) = 2343750Hz (slot req 2343750Hz, actual 2343750HZ div = 0) [ 239.392916] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 239.396109] I/O error, dev mmcblk2, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 2 [ 239.413523] Buffer I/O error on dev mmcblk2, logical block 0, lost async page write [ 245.431404] ext3: Unknown parameter 'compress-force' [ 245.446842] ext4: Unknown parameter 'compress-force' [ 245.479972] /dev/mmcblk2p1: Can't open blockdev [ 245.515559] /dev/mmcblk2p1: Can't open blockdev

I have another board , marking MXQPRO_V72, SOC RK3228A, eMMC H9TQ65A8GTMC, WiFi ESP8089 Boot well from SD card (Multitool and Armbian image written to the card). But when writing an image to eMMC using MULTITOOL, it does not boot. Also Armbian-config and Armbian-install are not executed due to lack of space. Also WiFi ESP8089 is not seen in the system booted from SD card. What could I have done wrong?

https://forum.armbian.com/topic/4877-h2-sunvell-r69-android-tv-box-aliexpress/page/10/

thanks, jock From armbian-config i did it : source_install headers_install Now i have in /usr/src linux-headers-5.10.60-rk322x linux-source-5.10.60-rk322x But how to proceed further to get the required kernel module I did not find in GOOGLE my skill in linux is <=1

Hello Jock ! I need to connect i2c-tiny-usb. As far as I understand, this requires an appropriate kernel module. modprobe i2c-tiny-usb responds : modprobe: FATAL: Module i2c-tiny-usb not found in directory /lib/modules/4.4.194 Do I need to rebuild the firmware myself with the necessary modules or is there some one already compiled?

@zero48, With people like @jock and @fabiobassa , this board couldn't win this fight Congratulations on your success I was rooting for you, but nothing could help

Rufus does a great job with img.xz files. Checked more than once.

@zero48 I would do like this: 1. through Rufus completely format SD by disabling "Quick format" 2. Write Multitool.img.xz . After that, in Win, the card should be seen as 2GB FAT32 with some files, such as: /backups /bsp /extlinux /images kernel.img LICENSE rk322x-box.dtb 3. Insert "Multitool" SD on box and PowerON. Should be boot and repartition FAT32 for whole space. p.s. Is there Android 10 in your box? Maybe there the bootloader somehow works differently?

Try Rufus https://rufus.ie/ I always keep "Rufus", "Win32 Disk Imager" and "HP USB Disk Storage Format Tool" handy for recording images. And you no need press "magic button" for boot with Multitool .

to @rna I repeated all the previous steps for myself. I am working in WinXP. 1. Recorded 2 MMC cards via Win32 disk imager and Rufus-usb-2-12. 2. I inserted the card into the slot of the TV box and applied power without touching RESET. Both cards took turns loading Armbian without any problems. Maybe you still have a different board? For example eMMC but not NAND like mine?