s812us
-
Posts
5 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by s812us
-
-
So follow up to my previous message ive been able to find the culprit of non working ethernet on the meson8m2-m8s.dtb file:
I decompiled both DTB's & compared the ethernet sections and was able to narrow it to the following parameter: phy-connection-type.
when it is set to "rgmii" ethernet is not working, but when set to "rgmii-id" ethernet is working! (referenced from https://patchwork.kernel.org/patch/9447579/)
so i recompiled the DTS got ethernet working but now cpu speed is always fixed on 1.2GHZ no matter what i try...so i reverted back to meson8m2-mxiii-plus.dtb.
I now have the following problem: i cant run docker probably due to some missing kernel modules which are missing, im familiar with comiling kernels for x86/64 & openwrt but never compiled for this kind of device, can someone point me to a good resource on how to compile kernel for S812 devices?
Thanks!
-
hi @RaptorSDS, thanks for answering!
the meson8m2-m8s.dtb was my first try and all seemed ok & better than all DTB's because it detected wireless/bluetooth also.
until i tried using ethernet & it doesnt work - even though its detected as eth0 with mac address it has failure to get ip address, cant connect to the network, cant get ip address (dhcp/static) & when restarting eth0 interface it says "connection timed out".
the device has RTL8211F ethernet chipset & dtb of meson8m2-mxiii-plus detects ethernet (but not wireless/bluetooth...)im using Armbian_20.05.5_Aml-s812_buster_current_5.7.0-rc6_20200523.img.
This is dmesg.log from meson8m2-mxiii-plus.dtb with working ethernet : (exceptions are from HDMI connected, disregard it)
Spoiler[ 0.000000] Booting Linux on physical CPU 0x200 [ 0.000000] Linux version 5.7.0-rc6-aml-s812 (root@vbox) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)), GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 2.32.0.20190321) #20.05.5 SMP Tue May 26 12:02:58 MSK 2020 [ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Tronsmart MXIII Plus [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 [ 0.000000] On node 0 totalpages: 523520 [ 0.000000] Normal zone: 1724 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 195840 pages, LIFO batch:63 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 16 pages/cpu s34440 r8192 d22904 u65536 [ 0.000000] pcpu-alloc: s34440 r8192 d22904 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 521796 [ 0.000000] Kernel command line: root=LABEL=ROOTFS rootfstype=ext4 rootflags=data=writeback rw console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.repair=yes net.ifnames=0 logo=osd1,loaded,0x7900000,${hdmimode},full [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1978324K/2094080K available (16384K kernel code, 692K rwdata, 4512K rodata, 1024K init, 965K bss, 50220K reserved, 65536K cma-reserved, 1245184K highmem) [ 0.000000] random: get_random_u32 called from cache_random_seq_create+0x7c/0x12c with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] irq_meson_gpio: 134 to 8 gpio interrupt mux initialized [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310: enabling full line of zeros but not enabled in Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 8 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 8 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x4100a0c9, AUX_CTRL 0x7ec80001 [ 0.000010] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000023] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000048] Switching to timer-based delay loop, resolution 1000ns [ 0.000466] Console: colour dummy device 80x30 [ 0.000692] printk: console [tty0] enabled [ 0.000723] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=4000) [ 0.000742] pid_max: default: 32768 minimum: 301 [ 0.000925] LSM: Security Framework initializing [ 0.001101] Smack: Initializing. [ 0.001109] Smack: IPv6 port labeling enabled. [ 0.001226] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001243] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001921] CPU: Testing write buffer coherency: ok [ 0.001949] CPU0: Spectre v2: using BPIALL workaround [ 0.002109] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200 [ 0.002630] Setting up static identity map for 0x300000 - 0x300060 [ 0.002738] rcu: Hierarchical SRCU implementation. [ 0.003145] smp: Bringing up secondary CPUs ... [ 0.003680] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201 [ 0.003685] CPU1: Spectre v2: using BPIALL workaround [ 0.004307] CPU2: thread -1, cpu 2, socket 2, mpidr 80000202 [ 0.004312] CPU2: Spectre v2: using BPIALL workaround [ 0.004921] CPU3: thread -1, cpu 3, socket 2, mpidr 80000203 [ 0.004926] CPU3: Spectre v2: using BPIALL workaround [ 0.005015] smp: Brought up 1 node, 4 CPUs [ 0.005029] SMP: Total of 4 processors activated (8.00 BogoMIPS). [ 0.005039] CPU: All CPU(s) started in SVC mode. [ 0.005451] devtmpfs: initialized [ 0.008983] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.009161] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.009185] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.010712] xor: measuring software checksum speed [ 0.048162] arm4regs : 1871.000 MB/sec [ 0.088162] 8regs : 1443.000 MB/sec [ 0.128161] 32regs : 1559.000 MB/sec [ 0.168161] neon : 1366.000 MB/sec [ 0.168171] xor: using function: arm4regs (1871.000 MB/sec) [ 0.168210] pinctrl core: initialized pinctrl subsystem [ 0.168673] thermal_sys: Registered thermal governor 'fair_share' [ 0.168676] thermal_sys: Registered thermal governor 'bang_bang' [ 0.168689] thermal_sys: Registered thermal governor 'step_wise' [ 0.168699] thermal_sys: Registered thermal governor 'user_space' [ 0.169254] NET: Registered protocol family 16 [ 0.170857] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.171506] cpuidle: using governor menu [ 0.171779] No ATAGs? [ 0.171859] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.171878] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.191200] cryptd: max_cpu_qlen set to 1000 [ 0.268164] raid6: neonx8 gen() 1229 MB/s [ 0.336169] raid6: neonx8 xor() 818 MB/s [ 0.404158] raid6: neonx4 gen() 1483 MB/s [ 0.472163] raid6: neonx4 xor() 1040 MB/s [ 0.540165] raid6: neonx2 gen() 1848 MB/s [ 0.608162] raid6: neonx2 xor() 1236 MB/s [ 0.676159] raid6: neonx1 gen() 1444 MB/s [ 0.744160] raid6: neonx1 xor() 1009 MB/s [ 0.812176] raid6: int32x8 gen() 402 MB/s [ 0.880158] raid6: int32x8 xor() 250 MB/s [ 0.948177] raid6: int32x4 gen() 443 MB/s [ 1.016181] raid6: int32x4 xor() 268 MB/s [ 1.084175] raid6: int32x2 gen() 561 MB/s [ 1.152185] raid6: int32x2 xor() 285 MB/s [ 1.220167] raid6: int32x1 gen() 521 MB/s [ 1.288173] raid6: int32x1 xor() 236 MB/s [ 1.288182] raid6: using algorithm neonx2 gen() 1848 MB/s [ 1.288191] raid6: .... xor() 1236 MB/s, rmw enabled [ 1.288200] raid6: using neon recovery algorithm [ 1.289161] iommu: Default domain type: Translated [ 1.289535] SCSI subsystem initialized [ 1.289657] libata version 3.00 loaded. [ 1.289807] usbcore: registered new interface driver usbfs [ 1.289842] usbcore: registered new interface driver hub [ 1.289913] usbcore: registered new device driver usb [ 1.290194] pps_core: LinuxPPS API ver. 1 registered [ 1.290205] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 1.290226] PTP clock support registered [ 1.290248] EDAC MC: Ver: 3.0.0 [ 1.290757] Advanced Linux Sound Architecture Driver Initialized. [ 1.291138] NetLabel: Initializing [ 1.291150] NetLabel: domain hash size = 128 [ 1.291158] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.291200] NetLabel: unlabeled traffic allowed by default [ 1.291640] clocksource: Switched to clocksource timer [ 1.291960] VFS: Disk quotas dquot_6.6.0 [ 1.292017] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.292144] FS-Cache: Loaded [ 1.292750] CacheFiles: Loaded [ 1.297622] NET: Registered protocol family 2 [ 1.298079] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.298113] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.298170] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.298259] TCP: Hash tables configured (established 8192 bind 8192) [ 1.298334] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.298366] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.298515] NET: Registered protocol family 1 [ 1.298862] RPC: Registered named UNIX socket transport module. [ 1.298876] RPC: Registered udp transport module. [ 1.298884] RPC: Registered tcp transport module. [ 1.298892] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.299034] Trying to unpack rootfs image as initramfs... [ 1.543915] Freeing initrd memory: 6420K [ 1.544756] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.681698] Initialise system trusted keyrings [ 1.681880] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 1.686146] DLM installed [ 1.686934] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.688046] NFS: Registering the id_resolver key type [ 1.688071] Key type id_resolver registered [ 1.688080] Key type id_legacy registered [ 1.688094] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.688104] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.689084] FS-Cache: Netfs 'cifs' registered for caching [ 1.689394] Key type cifs.spnego registered [ 1.689412] Key type cifs.idmap registered [ 1.689487] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 1.689800] fuse: init (API version 7.31) [ 1.690288] JFS: nTxBlock = 8192, nTxLock = 65536 [ 1.695381] SGI XFS with security attributes, no debug enabled [ 1.696701] NILFS version 2 loaded [ 1.697479] gfs2: GFS2 installed [ 1.727728] NET: Registered protocol family 38 [ 1.727752] Key type asymmetric registered [ 1.727763] Asymmetric key parser 'x509' registered [ 1.727806] bounce: pool size: 64 pages [ 1.727852] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.727866] io scheduler mq-deadline registered [ 1.727874] io scheduler kyber registered [ 1.733621] soc soc0: Amlogic Meson8m2 (S812) RevA (1d - 0:74E) detected [ 1.736259] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled [ 1.737939] c11084c0.serial: ttyAML1 at MMIO 0xc11084c0 (irq = 20, base_baud = 8854166) is a meson_uart [ 1.738323] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 28, base_baud = 8854166) is a meson_uart [ 2.642896] printk: console [ttyAML0] enabled [ 2.648354] usbcore: registered new interface driver udl [ 2.659195] brd: module loaded [ 2.664778] loop: module loaded [ 2.664809] dummy-irq: no IRQ given. Use irq=N [ 2.667612] Loading iSCSI transport class v2.0-870. [ 2.671999] rdac: device handler registered [ 2.675920] hp_sw: device handler registered [ 2.680087] emc: device handler registered [ 2.684243] alua: device handler registered [ 2.688514] iscsi: registered transport (tcp) [ 2.693184] SSFDC read-only Flash Translation layer [ 2.697501] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.704852] libphy: Fixed MDIO Bus: probed [ 2.708156] tun: Universal TUN/TAP device driver, 1.6 [ 2.713151] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 2.720826] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 2.732284] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.735809] ehci-platform: EHCI generic platform driver [ 2.741125] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.747172] ohci-platform: OHCI generic platform driver [ 2.752744] usbcore: registered new interface driver usb-storage [ 2.758361] udc-core: couldn't find an available UDC - added [g_ether] to list of pending drivers [ 2.767301] mousedev: PS/2 mouse device common for all mice [ 2.773310] i2c /dev entries driver [ 2.777029] VCCK: Bringing 600000uV into 825000-825000uV [ 2.781993] VDD_EE: Bringing 600000uV into 950000-950000uV [ 2.787437] VDD_DDR: Bringing 600000uV into 1500000-1500000uV [ 2.793152] VDDIO_AO28: Bringing 900000uV into 2900000-2900000uV [ 2.799139] VDDIO_AO18: Bringing 900000uV into 1800000-1800000uV [ 2.805009] VCC1V8: Bringing 600000uV into 1800000-1800000uV [ 2.810639] VCC2V8: Bringing 900000uV into 2850000-2850000uV [ 2.816283] AVDD1V8: Bringing 900000uV into 1800000-1800000uV [ 2.821994] VDD_LDO: Bringing 1700000uV into 2700000-2700000uV [ 2.828556] pps_ldisc: PPS line discipline registered [ 2.833633] usbcore: registered new interface driver pcwd_usb [ 2.838823] meson_wdt c1109900.watchdog: Watchdog enabled (timeout=8 sec, nowayout=1) [ 2.846329] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=1) [ 2.857488] pwrseq_simple: probe of sdio-pwrseq failed with error -5 [ 2.860868] sdhci: Secure Digital Host Controller Interface driver [ 2.866876] sdhci: Copyright(c) Pierre Ossman [ 2.871394] usbcore: registered new interface driver ushc [ 2.877755] platform c1108c20.mmc:slot@1: Got CD GPIO [ 2.912129] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.916675] ledtrig-cpu: registered to indicate activity on CPUs [ 2.919102] hid: raw HID events driver (C) Jiri Kosina [ 2.924343] usbcore: registered new interface driver usbhid [ 2.929084] usbhid: USB HID core driver [ 2.932902] remoteproc remoteproc0: meson-mx-ao-arc is available [ 2.938728] remoteproc remoteproc0: Direct firmware load for rproc-meson-mx-ao-arc-fw failed with error -2 [ 2.948278] remoteproc remoteproc0: powering up meson-mx-ao-arc [ 2.954244] remoteproc remoteproc0: Direct firmware load for rproc-meson-mx-ao-arc-fw failed with error -2 [ 2.959835] mmc0: new high speed SDHC card at address b368 [ 2.963790] remoteproc remoteproc0: request_firmware failed: -2 [ 2.969481] no UART detected at 0x1 [ 2.978890] mmcblk0: mmc0:b368 USD 3.76 GiB [ 2.984597] mmcblk0: p1 p2 [ 2.984861] oprofile: using arm/armv7-ca9 [ 2.990781] NET: Registered protocol family 26 [ 2.994202] GACT probability on [ 2.997411] Mirror/redirect action on [ 3.001030] Simple TC action Loaded [ 3.005955] netem: version 1.3 [ 3.007477] u32 classifier [ 3.010145] Performance counters on [ 3.013953] input device check on [ 3.017591] Actions configured [ 3.036546] xt_time: kernel timezone is -0000 [ 3.036598] IPVS: Registered protocols () [ 3.039281] IPVS: Connection hash table configured (size=4096, memory=32Kbytes) [ 3.048899] IPVS: ipvs loaded. [ 3.049696] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.055386] gre: GRE over IPv4 demultiplexor driver [ 3.059903] ip_gre: GRE over IPv4 tunneling driver [ 3.066410] IPv4 over IPsec tunneling driver [ 3.069543] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully [ 3.076750] Initializing XFRM netlink socket [ 3.079513] IPsec XFRM device driver [ 3.083404] NET: Registered protocol family 10 [ 3.127357] Segment Routing with IPv6 [ 3.127489] mip6: Mobile IPv6 [ 3.130447] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.134784] ip6_gre: GRE over IPv6 tunneling driver [ 3.139411] NET: Registered protocol family 17 [ 3.143536] NET: Registered protocol family 15 [ 3.147994] Bridge firewalling registered [ 3.152072] NET: Registered protocol family 5 [ 3.156336] NET: Unregistered protocol family 5 [ 3.160868] 8021q: 802.1Q VLAN Support v1.8 [ 3.171131] DCCP: Activated CCID 2 (TCP-like) [ 3.171170] DCCP: Activated CCID 3 (TCP-Friendly Rate Control) [ 3.175996] sctp: Hash tables configured (bind 512/512) [ 3.181179] NET: Registered protocol family 21 [ 3.185357] Registered RDS/tcp transport [ 3.189259] 9pnet: Installing 9P2000 support [ 3.193475] Key type dns_resolver registered [ 3.197719] openvswitch: Open vSwitch switching datapath [ 3.203302] NET: Registered protocol family 40 [ 3.207432] mpls_gso: MPLS GSO support [ 3.211463] ThumbEE CPU extension supported. [ 3.215375] Registering SWP/SWPB emulation handler [ 3.270649] registered taskstats version 1 [ 3.270681] Loading compiled-in X.509 certificates [ 3.274036] Key type ._fscrypt registered [ 3.278556] Key type .fscrypt registered [ 3.281787] Key type fscrypt-provisioning registered [ 3.289366] Btrfs loaded, crc32c=crc32c-generic [ 3.302283] reg-fixed-voltage: probe of regulator-va-5v failed with error -5 [ 3.304845] meson-drm d0100000.vpu: Queued 3 outputs on vpu [ 3.309452] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.317394] meson-drm d0100000.vpu: bound d0042000.hdmi-tx (ops 0xc143448c) [ 3.323092] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 0 [ 3.432600] [drm] kms: can't enable cloning when we probably wanted to. [ 3.486013] meson-drm d0100000.vpu: meson_vclk_setup(1, 594000, 594000, 594000, 0) [ 3.727821] ------------[ cut here ]------------ [ 3.727893] WARNING: CPU: 0 PID: 321 at drivers/gpu/drm/drm_atomic_helper.c:1495 drm_atomic_helper_wait_for_vblanks.part.1+0x2a0/0x2a8 [ 3.727909] [CRTC:42:meson_crtc] vblank wait timed out [ 3.727917] Modules linked in: [ 3.727958] CPU: 0 PID: 321 Comm: kworker/0:2 Not tainted 5.7.0-rc6-aml-s812 #20.05.5 [ 3.727970] Hardware name: Amlogic Meson platform [ 3.728014] Workqueue: events deferred_probe_work_func [ 3.728092] [<c030f744>] (unwind_backtrace) from [<c030ab3c>] (show_stack+0x10/0x14) [ 3.728131] [<c030ab3c>] (show_stack) from [<c0a68700>] (dump_stack+0xc0/0xd4) [ 3.728171] [<c0a68700>] (dump_stack) from [<c0335ce0>] (__warn+0xbc/0xd8) [ 3.728209] [<c0335ce0>] (__warn) from [<c0335d90>] (warn_slowpath_fmt+0x94/0xb8) [ 3.728258] [<c0335d90>] (warn_slowpath_fmt) from [<c0b33c68>] (drm_atomic_helper_wait_for_vblanks.part.1+0x2a0/0x2a8) [ 3.728312] [<c0b33c68>] (drm_atomic_helper_wait_for_vblanks.part.1) from [<c0b366dc>] (drm_atomic_helper_commit_tail_rpm+0x5c/0x6c) [ 3.728356] [<c0b366dc>] (drm_atomic_helper_commit_tail_rpm) from [<c0b36564>] (commit_tail+0x9c/0x1b0) [ 3.728397] [<c0b36564>] (commit_tail) from [<c0b37190>] (drm_atomic_helper_commit+0x134/0x158) [ 3.728444] [<c0b37190>] (drm_atomic_helper_commit) from [<c0b65264>] (drm_client_modeset_commit_atomic+0x16c/0x210) [ 3.728484] [<c0b65264>] (drm_client_modeset_commit_atomic) from [<c0b65360>] (drm_client_modeset_commit_locked+0x58/0x184) [ 3.728526] [<c0b65360>] (drm_client_modeset_commit_locked) from [<c0b3c7c4>] (drm_fb_helper_pan_display+0xc8/0x1dc) [ 3.728565] [<c0b3c7c4>] (drm_fb_helper_pan_display) from [<c0aa2b1c>] (fb_pan_display+0x9c/0x110) [ 3.728606] [<c0aa2b1c>] (fb_pan_display) from [<c0ab0a74>] (bit_update_start+0x14/0x30) [ 3.728645] [<c0ab0a74>] (bit_update_start) from [<c0aaec04>] (fbcon_switch+0x348/0x498) [ 3.728683] [<c0aaec04>] (fbcon_switch) from [<c0af5be4>] (redraw_screen+0xdc/0x258) [ 3.728720] [<c0af5be4>] (redraw_screen) from [<c0aaf0e8>] (fbcon_prepare_logo+0x394/0x410) [ 3.728756] [<c0aaf0e8>] (fbcon_prepare_logo) from [<c0aaf5d0>] (fbcon_init+0x46c/0x578) [ 3.728788] [<c0aaf5d0>] (fbcon_init) from [<c0af48b8>] (visual_init+0xbc/0x104) [ 3.728822] [<c0af48b8>] (visual_init) from [<c0af5f40>] (do_bind_con_driver+0x1e0/0x3bc) [ 3.728857] [<c0af5f40>] (do_bind_con_driver) from [<c0af646c>] (do_take_over_console+0x138/0x1d4) [ 3.728893] [<c0af646c>] (do_take_over_console) from [<c0aab6c8>] (do_fbcon_takeover+0x74/0xd4) [ 3.728927] [<c0aab6c8>] (do_fbcon_takeover) from [<c0aa3770>] (register_framebuffer+0x204/0x2d8) [ 3.728966] [<c0aa3770>] (register_framebuffer) from [<c0b3b468>] (__drm_fb_helper_initial_config_and_unlock+0x3a4/0x550) [ 3.729005] [<c0b3b468>] (__drm_fb_helper_initial_config_and_unlock) from [<c0b3bbf8>] (drm_fbdev_client_hotplug+0xdc/0x194) [ 3.729041] [<c0b3bbf8>] (drm_fbdev_client_hotplug) from [<c0b3bd64>] (drm_fbdev_generic_setup+0x94/0x110) [ 3.729083] [<c0b3bd64>] (drm_fbdev_generic_setup) from [<c0b771cc>] (meson_drv_bind_master+0x404/0x51c) [ 3.729134] [<c0b771cc>] (meson_drv_bind_master) from [<c0b98364>] (try_to_bring_up_master+0x160/0x1a8) [ 3.729173] [<c0b98364>] (try_to_bring_up_master) from [<c0b987a4>] (component_master_add_with_match+0xc4/0xf8) [ 3.729209] [<c0b987a4>] (component_master_add_with_match) from [<c0b773ac>] (meson_drv_probe+0xc8/0x100) [ 3.729244] [<c0b773ac>] (meson_drv_probe) from [<c0ba0b94>] (platform_drv_probe+0x48/0x98) [ 3.729282] [<c0ba0b94>] (platform_drv_probe) from [<c0b9ede8>] (really_probe+0x1e0/0x344) [ 3.729323] [<c0b9ede8>] (really_probe) from [<c0b9f060>] (driver_probe_device+0x60/0x168) [ 3.729361] [<c0b9f060>] (driver_probe_device) from [<c0b9d250>] (bus_for_each_drv+0x80/0xc4) [ 3.729398] [<c0b9d250>] (bus_for_each_drv) from [<c0b9eb94>] (__device_attach+0xd0/0x13c) [ 3.729435] [<c0b9eb94>] (__device_attach) from [<c0b9defc>] (bus_probe_device+0x84/0x8c) [ 3.729473] [<c0b9defc>] (bus_probe_device) from [<c0b9e384>] (deferred_probe_work_func+0x64/0x90) [ 3.729517] [<c0b9e384>] (deferred_probe_work_func) from [<c03502a8>] (process_one_work+0x218/0x474) [ 3.729557] [<c03502a8>] (process_one_work) from [<c0350548>] (worker_thread+0x44/0x5d4) [ 3.729593] [<c0350548>] (worker_thread) from [<c0356acc>] (kthread+0x14c/0x150) [ 3.729628] [<c0356acc>] (kthread) from [<c0300148>] (ret_from_fork+0x14/0x2c) [ 3.729645] Exception stack(0xedf7dfb0 to 0xedf7dff8) [ 3.729671] dfa0: 00000000 00000000 00000000 00000000 [ 3.729703] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 3.729728] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 3.729760] ---[ end trace 235b8f376c373674 ]--- [ 4.646786] Console: switching to colour frame buffer device 480x135 [ 5.246875] meson-drm d0100000.vpu: fb0: mesondrmfb frame buffer device [ 5.254092] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found [ 5.260062] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found [ 5.266281] meson8b-dwmac c9410000.ethernet: PTP uses main clock [ 5.272732] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37 [ 5.279302] meson8b-dwmac c9410000.ethernet: DWMAC1000 [ 5.284495] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported [ 5.291947] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported [ 5.299401] meson8b-dwmac c9410000.ethernet: COE Type 2 [ 5.304601] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported [ 5.311623] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported [ 5.318068] meson8b-dwmac c9410000.ethernet: Normal descriptors [ 5.323934] meson8b-dwmac c9410000.ethernet: Ring mode enabled [ 5.329741] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 5.337717] meson8b-dwmac c9410000.ethernet: device MAC address 86:b3:52:0d:7b:14 [ 5.345403] libphy: stmmac: probed [ 5.400759] dwc2 c9040000.usb: supply vusb_d not found, using dummy regulator [ 5.403016] dwc2 c9040000.usb: supply vusb_a not found, using dummy regulator [ 5.545924] dwc2 c9040000.usb: EPs: 7, dedicated fifos, 1984 entries in SPRAM [ 5.552078] using random self ethernet address [ 5.553080] using random host ethernet address [ 5.559852] usb0: HOST MAC 12:42:90:d9:dc:68 [ 5.561965] usb0: MAC 36:80:6e:d3:c3:a7 [ 5.565680] using random self ethernet address [ 5.570024] using random host ethernet address [ 5.574586] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 [ 5.581041] g_ether gadget: g_ether ready [ 5.585030] dwc2 c9040000.usb: bound driver g_ether [ 5.591187] dwc2 c9040000.usb: DWC OTG Controller [ 5.594640] dwc2 c9040000.usb: new USB bus registered, assigned bus number 1 [ 5.601694] dwc2 c9040000.usb: irq 31, io mem 0xc9040000 [ 5.607474] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07 [ 5.615117] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.622304] usb usb1: Product: DWC OTG Controller [ 5.626970] usb usb1: Manufacturer: Linux 5.7.0-rc6-aml-s812 dwc2_hsotg [ 5.633556] usb usb1: SerialNumber: c9040000.usb [ 5.641439] hub 1-0:1.0: USB hub found [ 5.641836] hub 1-0:1.0: 1 port detected [ 5.646594] dwc2 c90c0000.usb: supply vusb_d not found, using dummy regulator [ 5.652891] dwc2 c90c0000.usb: supply vusb_a not found, using dummy regulator [ 5.719853] dwc2 c90c0000.usb: DWC OTG Controller [ 5.719990] dwc2 c90c0000.usb: new USB bus registered, assigned bus number 2 [ 5.726069] dwc2 c90c0000.usb: irq 32, io mem 0xc90c0000 [ 5.731434] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07 [ 5.739575] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.746764] usb usb2: Product: DWC OTG Controller [ 5.751445] usb usb2: Manufacturer: Linux 5.7.0-rc6-aml-s812 dwc2_hsotg [ 5.765534] usb usb2: SerialNumber: c90c0000.usb [ 5.778951] hub 2-0:1.0: USB hub found [ 5.792082] hub 2-0:1.0: 1 port detected [ 5.805975] meson-mx-ao-arc-firmware ao-arc-firmware: Failed to request mbox channel #0 [ 5.824248] printk: console [netcon0] enabled [ 5.953917] netconsole: network logging started [ 6.272684] usb 2-1: new full-speed USB device number 2 using dwc2 [ 6.720140] ALSA device list: [ 6.746794] No soundcards found. [ 6.760622] Freeing unused kernel memory: 1024K [ 6.774159] Run /init as init process [ 6.787382] with arguments: [ 6.787383] /init [ 6.787385] with environment: [ 6.787386] HOME=/ [ 6.787388] TERM=linux [ 6.787390] logo=osd1,loaded,0x7900000,${hdmimode},full [ 6.787564] process '/usr/bin/sh' started with executable stack [ 6.941448] usb 2-1: New USB device found, idVendor=1b1c, idProduct=1b0a, bcdDevice= 1.03 [ 6.958199] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.974606] usb 2-1: Product: Corsair K30A Gaming Keyboard [ 6.989307] usb 2-1: Manufacturer: Corsair [ 7.005092] input: Corsair Corsair K30A Gaming Keyboard as /devices/platform/soc/c90c0000.usb/usb2/2-1/2-1:1.0/0003:1B1C:1B0A.0001/input/input0 [ 7.053682] random: fast init done [ 7.084077] hid-generic 0003:1B1C:1B0A.0001: input,hidraw0: USB HID v1.11 Keyboard [Corsair Corsair K30A Gaming Keyboard] on usb-c90c0000.usb-1/input0 [ 7.109342] input: Corsair Corsair K30A Gaming Keyboard as /devices/platform/soc/c90c0000.usb/usb2/2-1/2-1:1.1/0003:1B1C:1B0A.0002/input/input1 [ 7.111981] input: adc-keys as /devices/platform/adc-keys/input/input2 [ 7.191937] hid-generic 0003:1B1C:1B0A.0002: input,hidraw1: USB HID v1.11 Device [Corsair Corsair K30A Gaming Keyboard] on usb-c90c0000.usb-1/input1 [ 7.218518] input: Corsair Corsair K30A Gaming Keyboard as /devices/platform/soc/c90c0000.usb/usb2/2-1/2-1:1.2/0003:1B1C:1B0A.0003/input/input3 [ 7.301191] hid-generic 0003:1B1C:1B0A.0003: input,hidraw2: USB HID v1.11 Keyboard [Corsair Corsair K30A Gaming Keyboard] on usb-c90c0000.usb-1/input2 [ 9.632562] EXT4-fs (mmcblk0p2): mounted filesystem with writeback data mode. Opts: data=writeback [ 11.202306] random: crng init done [ 13.401262] systemd[1]: System time before build time, advancing clock. [ 14.294129] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 15.057766] systemd[1]: Detected architecture arm. [ 16.145502] systemd[1]: Set hostname to <aml-s812>. [ 16.600940] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 17.152643] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 18.223154] systemd[1]: Listening on Journal Socket. [ 18.261144] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 18.293013] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 18.313345] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 18.348864] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 18.578399] EXT4-fs (mmcblk0p2): re-mounted. Opts: commit=600,errors=remount-ro [ 19.328339] systemd[1]: Starting Helper to synchronize boot up for ifupdown... [ 19.366160] systemd[1]: Started Set the console keyboard layout. [ 19.383558] systemd[1]: Started Load/Save Random Seed. [ 19.434315] systemd[1]: Started Helper to synchronize boot up for ifupdown. [ 20.698871] systemd[1]: Started Create System Users. [ 20.722259] systemd[1]: Starting Create Static Device Nodes in /dev... [ 20.800692] systemd[1]: Started Create Static Device Nodes in /dev. [ 20.826967] systemd[1]: Starting udev Kernel Device Manager... [ 20.843358] systemd[1]: Reached target Local File Systems (Pre). [ 20.935260] systemd[1]: Mounting /tmp... [ 21.315482] cs4334-codec i2s-audio-codec: Failed to create new controls -517 [ 21.315513] gx-sound-card sound: ASoC: failed to instantiate card -517 [ 21.371111] Registered IR keymap rc-empty [ 21.371201] rc rc0: meson-ir as /devices/platform/soc/c8100000.aobus/c8100480.ir-receiver/rc/rc0 [ 21.372561] rc rc0: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter [ 21.372676] input: meson-ir as /devices/platform/soc/c8100000.aobus/c8100480.ir-receiver/rc/rc0/input4 [ 21.375416] meson-ir c8100480.ir-receiver: receiver initialized [ 21.376439] cs4334-codec i2s-audio-codec: Failed to create new controls -517 [ 21.376472] gx-sound-card sound: ASoC: failed to instantiate card -517 [ 21.399784] meson-ao-cec c8100100.cec: core clock request failed [ 21.399830] meson-ao-cec c8100100.cec: CEC controller registration failed [ 21.399902] meson-ao-cec: probe of c8100100.cec failed with error -2 [ 21.415465] lima d00c0000.gpu: IRQ ppmmu3 not found [ 21.415575] lima d00c0000.gpu: IRQ ppmmu7 not found [ 21.415588] lima d00c0000.gpu: gp - mali450 version major 0 minor 0 [ 21.415619] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0 [ 21.415714] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0 [ 21.415749] lima d00c0000.gpu: pp2 - mali450 version major 0 minor 0 [ 21.415772] lima d00c0000.gpu: IRQ pp3 not found [ 21.415784] lima d00c0000.gpu: pp4 - mali450 version major 0 minor 0 [ 21.415812] lima d00c0000.gpu: pp5 - mali450 version major 0 minor 0 [ 21.415841] lima d00c0000.gpu: pp6 - mali450 version major 0 minor 0 [ 21.415870] lima d00c0000.gpu: IRQ pp7 not found [ 21.415876] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus [ 21.415883] lima d00c0000.gpu: l2 cache 128K, 4-way, 64byte cache line, 128bit external bus [ 21.415891] lima d00c0000.gpu: l2 cache 128K, 4-way, 64byte cache line, 128bit external bus [ 21.425609] lima d00c0000.gpu: bus rate = 141666667 [ 21.425619] lima d00c0000.gpu: mod rate = 24000000 [ 21.425701] debugfs: Directory 'd00c0000.gpu-mali' with parent 'VDD_EE' already present! [ 21.427189] [drm] Initialized lima 1.1.0 20191231 for d00c0000.gpu on minor 1 [ 21.428159] cs4334-codec i2s-audio-codec: Failed to create new controls -517 [ 21.428199] gx-sound-card sound: ASoC: failed to instantiate card -517 [ 22.549532] ------------[ cut here ]------------ [ 22.549574] WARNING: CPU: 1 PID: 633 at drivers/gpu/drm/drm_atomic_helper.c:1495 drm_atomic_helper_wait_for_vblanks.part.1+0x2a0/0x2a8 [ 22.549582] [CRTC:42:meson_crtc] vblank wait timed out [ 22.549586] Modules linked in: joydev lima ao_cec gpu_sched meson_ir snd_soc_spdif_tx snd_soc_cs4334 adc_keys [ 22.549635] CPU: 1 PID: 633 Comm: setfont Tainted: G W 5.7.0-rc6-aml-s812 #20.05.5 [ 22.549640] Hardware name: Amlogic Meson platform [ 22.549677] [<c030f744>] (unwind_backtrace) from [<c030ab3c>] (show_stack+0x10/0x14) [ 22.549699] [<c030ab3c>] (show_stack) from [<c0a68700>] (dump_stack+0xc0/0xd4) [ 22.549720] [<c0a68700>] (dump_stack) from [<c0335ce0>] (__warn+0xbc/0xd8) [ 22.549739] [<c0335ce0>] (__warn) from [<c0335d90>] (warn_slowpath_fmt+0x94/0xb8) [ 22.549764] [<c0335d90>] (warn_slowpath_fmt) from [<c0b33c68>] (drm_atomic_helper_wait_for_vblanks.part.1+0x2a0/0x2a8) [ 22.549792] [<c0b33c68>] (drm_atomic_helper_wait_for_vblanks.part.1) from [<c0b366dc>] (drm_atomic_helper_commit_tail_rpm+0x5c/0x6c) [ 22.549814] [<c0b366dc>] (drm_atomic_helper_commit_tail_rpm) from [<c0b36564>] (commit_tail+0x9c/0x1b0) [ 22.549834] [<c0b36564>] (commit_tail) from [<c0b37190>] (drm_atomic_helper_commit+0x134/0x158) [ 22.549860] [<c0b37190>] (drm_atomic_helper_commit) from [<c0b65264>] (drm_client_modeset_commit_atomic+0x16c/0x210) [ 22.549881] [<c0b65264>] (drm_client_modeset_commit_atomic) from [<c0b65360>] (drm_client_modeset_commit_locked+0x58/0x184) [ 22.549903] [<c0b65360>] (drm_client_modeset_commit_locked) from [<c0b3c7c4>] (drm_fb_helper_pan_display+0xc8/0x1dc) [ 22.549923] [<c0b3c7c4>] (drm_fb_helper_pan_display) from [<c0aa2b1c>] (fb_pan_display+0x9c/0x110) [ 22.549944] [<c0aa2b1c>] (fb_pan_display) from [<c0ab0a74>] (bit_update_start+0x14/0x30) [ 22.549963] [<c0ab0a74>] (bit_update_start) from [<c0aaec04>] (fbcon_switch+0x348/0x498) [ 22.549982] [<c0aaec04>] (fbcon_switch) from [<c0af5be4>] (redraw_screen+0xdc/0x258) [ 22.550001] [<c0af5be4>] (redraw_screen) from [<c0aae770>] (fbcon_do_set_font+0x20c/0x278) [ 22.550019] [<c0aae770>] (fbcon_do_set_font) from [<c0aafca4>] (fbcon_set_font+0x1e8/0x21c) [ 22.550038] [<c0aafca4>] (fbcon_set_font) from [<c0afb03c>] (con_font_op+0x3b0/0x4e8) [ 22.550061] [<c0afb03c>] (con_font_op) from [<c0aec874>] (vt_ioctl+0xccc/0x1790) [ 22.550081] [<c0aec874>] (vt_ioctl) from [<c0adb824>] (tty_ioctl+0x274/0xb04) [ 22.550100] [<c0adb824>] (tty_ioctl) from [<c049e004>] (ksys_ioctl+0x1cc/0xb80) [ 22.550119] [<c049e004>] (ksys_ioctl) from [<c0300240>] (__sys_trace_return+0x0/0x20) [ 22.550128] Exception stack(0xec703fa8 to 0xec703ff0) [ 22.550145] 3fa0: 00000200 00000010 00000003 00004b72 bea5632c 00000000 [ 22.550163] 3fc0: 00000200 00000010 0232e6d0 00000036 004dc000 b6f04968 bea5632c 00000008 [ 22.550174] 3fe0: 004dc064 bea56304 004c92bf b6e76f08 [ 22.550183] ---[ end trace 235b8f376c373675 ]--- [ 27.575230] systemd[1]: armbian-zram-config.service: Main process exited, code=exited, status=1/FAILURE [ 27.575624] systemd[1]: armbian-zram-config.service: Failed with result 'exit-code'. [ 27.577585] systemd[1]: Failed to start Armbian ZRAM config. [ 27.628318] systemd[1]: Starting Armbian memory supported logging... [ 27.648471] systemd[1]: Started Raise network interfaces. [ 27.658765] meson8b-dwmac c9410000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=POLL) [ 27.661043] meson8b-dwmac c9410000.ethernet eth0: No Safety Features support found [ 27.661057] meson8b-dwmac c9410000.ethernet eth0: PTP not supported by HW [ 27.661068] meson8b-dwmac c9410000.ethernet eth0: configuring for phy/rgmii-id link mode [ 30.742335] systemd[1]: Started Armbian memory supported logging. [ 30.768350] systemd[1]: Starting Journal Service... [ 30.921370] systemd[1]: Started Journal Service. [ 30.989414] systemd-journald[832]: Received request to flush runtime journal from PID 1 [ 31.746933] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 31.746961] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 37.855671] USB_VBUS: disabling [ 38.990186] EXT4-fs (mmcblk0p2): resizing filesystem from 345088 to 798976 blocks [ 57.553629] EXT4-fs (mmcblk0p2): resized filesystem to 798976 [ 75.007732] rc rc0: two consecutive events of type space
This is dmesg.log from meson8m2-m8s.dtb with non-working ethernet :(exceptions are from HDMI connected, disregard it)
Spoiler[ 0.000000] Booting Linux on physical CPU 0x200 [ 0.000000] Linux version 5.7.0-rc6-aml-s812 (root@vbox) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)), GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 2.32.0.20190321) #20.05.5 SMP Tue May 26 12:02:58 MSK 2020 [ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Akaso M8S [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 [ 0.000000] On node 0 totalpages: 523520 [ 0.000000] Normal zone: 1724 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 195840 pages, LIFO batch:63 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 16 pages/cpu s34440 r8192 d22904 u65536 [ 0.000000] pcpu-alloc: s34440 r8192 d22904 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 521796 [ 0.000000] Kernel command line: root=LABEL=ROOTFS rootfstype=ext4 rootflags=data=writeback rw console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.repair=yes net.ifnames=0 logo=osd1,loaded,0x7900000,${hdmimode},full [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1978320K/2094080K available (16384K kernel code, 692K rwdata, 4512K rodata, 1024K init, 965K bss, 50224K reserved, 65536K cma-reserved, 1245184K highmem) [ 0.000000] random: get_random_u32 called from cache_random_seq_create+0x7c/0x12c with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] irq_meson_gpio: 134 to 8 gpio interrupt mux initialized [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310: enabling full line of zeros but not enabled in Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 8 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 8 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x4100a0c9, AUX_CTRL 0x7ec80001 [ 0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000022] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000049] Switching to timer-based delay loop, resolution 1000ns [ 0.000469] Console: colour dummy device 80x30 [ 0.000693] printk: console [tty0] enabled [ 0.000726] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=4000) [ 0.000744] pid_max: default: 32768 minimum: 301 [ 0.000930] LSM: Security Framework initializing [ 0.001104] Smack: Initializing. [ 0.001112] Smack: IPv6 port labeling enabled. [ 0.001229] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001247] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001923] CPU: Testing write buffer coherency: ok [ 0.001951] CPU0: Spectre v2: using BPIALL workaround [ 0.002118] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200 [ 0.002676] Setting up static identity map for 0x300000 - 0x300060 [ 0.002793] rcu: Hierarchical SRCU implementation. [ 0.003245] smp: Bringing up secondary CPUs ... [ 0.003820] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201 [ 0.003826] CPU1: Spectre v2: using BPIALL workaround [ 0.004508] CPU2: thread -1, cpu 2, socket 2, mpidr 80000202 [ 0.004512] CPU2: Spectre v2: using BPIALL workaround [ 0.005116] CPU3: thread -1, cpu 3, socket 2, mpidr 80000203 [ 0.005120] CPU3: Spectre v2: using BPIALL workaround [ 0.005202] smp: Brought up 1 node, 4 CPUs [ 0.005215] SMP: Total of 4 processors activated (8.00 BogoMIPS). [ 0.005225] CPU: All CPU(s) started in SVC mode. [ 0.005640] devtmpfs: initialized [ 0.009207] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.009384] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.009406] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.010925] xor: measuring software checksum speed [ 0.048165] arm4regs : 1865.000 MB/sec [ 0.088163] 8regs : 1439.000 MB/sec [ 0.128164] 32regs : 1555.000 MB/sec [ 0.168163] neon : 1363.000 MB/sec [ 0.168172] xor: using function: arm4regs (1865.000 MB/sec) [ 0.168221] pinctrl core: initialized pinctrl subsystem [ 0.168677] thermal_sys: Registered thermal governor 'fair_share' [ 0.168680] thermal_sys: Registered thermal governor 'bang_bang' [ 0.168694] thermal_sys: Registered thermal governor 'step_wise' [ 0.168703] thermal_sys: Registered thermal governor 'user_space' [ 0.169258] NET: Registered protocol family 16 [ 0.170862] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.171509] cpuidle: using governor menu [ 0.171777] No ATAGs? [ 0.171859] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.171880] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.191483] cryptd: max_cpu_qlen set to 1000 [ 0.268185] raid6: neonx8 gen() 1226 MB/s [ 0.336164] raid6: neonx8 xor() 817 MB/s [ 0.404178] raid6: neonx4 gen() 1483 MB/s [ 0.472169] raid6: neonx4 xor() 1039 MB/s [ 0.540164] raid6: neonx2 gen() 1848 MB/s [ 0.608167] raid6: neonx2 xor() 1236 MB/s [ 0.676177] raid6: neonx1 gen() 1443 MB/s [ 0.744164] raid6: neonx1 xor() 1009 MB/s [ 0.812207] raid6: int32x8 gen() 402 MB/s [ 0.880186] raid6: int32x8 xor() 250 MB/s [ 0.948169] raid6: int32x4 gen() 443 MB/s [ 1.016168] raid6: int32x4 xor() 268 MB/s [ 1.084174] raid6: int32x2 gen() 562 MB/s [ 1.152170] raid6: int32x2 xor() 285 MB/s [ 1.220215] raid6: int32x1 gen() 521 MB/s [ 1.288207] raid6: int32x1 xor() 236 MB/s [ 1.288216] raid6: using algorithm neonx2 gen() 1848 MB/s [ 1.288225] raid6: .... xor() 1236 MB/s, rmw enabled [ 1.288233] raid6: using neon recovery algorithm [ 1.289814] iommu: Default domain type: Translated [ 1.290212] SCSI subsystem initialized [ 1.290326] libata version 3.00 loaded. [ 1.290474] usbcore: registered new interface driver usbfs [ 1.290516] usbcore: registered new interface driver hub [ 1.290561] usbcore: registered new device driver usb [ 1.290840] pps_core: LinuxPPS API ver. 1 registered [ 1.290851] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 1.290876] PTP clock support registered [ 1.290898] EDAC MC: Ver: 3.0.0 [ 1.291391] Advanced Linux Sound Architecture Driver Initialized. [ 1.291758] NetLabel: Initializing [ 1.291769] NetLabel: domain hash size = 128 [ 1.291778] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.291821] NetLabel: unlabeled traffic allowed by default [ 1.292334] clocksource: Switched to clocksource timer [ 1.292715] VFS: Disk quotas dquot_6.6.0 [ 1.292776] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.292886] FS-Cache: Loaded [ 1.293045] CacheFiles: Loaded [ 1.297976] NET: Registered protocol family 2 [ 1.298446] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.298480] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.298537] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.298626] TCP: Hash tables configured (established 8192 bind 8192) [ 1.298704] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.298736] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.298875] NET: Registered protocol family 1 [ 1.299211] RPC: Registered named UNIX socket transport module. [ 1.299226] RPC: Registered udp transport module. [ 1.299234] RPC: Registered tcp transport module. [ 1.299242] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.299395] Trying to unpack rootfs image as initramfs... [ 1.545220] Freeing initrd memory: 6420K [ 1.546083] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.682238] Initialise system trusted keyrings [ 1.682407] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 1.686667] DLM installed [ 1.687443] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.688536] NFS: Registering the id_resolver key type [ 1.688563] Key type id_resolver registered [ 1.688573] Key type id_legacy registered [ 1.688587] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.688596] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.689571] FS-Cache: Netfs 'cifs' registered for caching [ 1.689880] Key type cifs.spnego registered [ 1.689898] Key type cifs.idmap registered [ 1.689971] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 1.690283] fuse: init (API version 7.31) [ 1.690783] JFS: nTxBlock = 8192, nTxLock = 65536 [ 1.695921] SGI XFS with security attributes, no debug enabled [ 1.697216] NILFS version 2 loaded [ 1.697974] gfs2: GFS2 installed [ 1.727902] NET: Registered protocol family 38 [ 1.727927] Key type asymmetric registered [ 1.727936] Asymmetric key parser 'x509' registered [ 1.727980] bounce: pool size: 64 pages [ 1.728026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.728040] io scheduler mq-deadline registered [ 1.728049] io scheduler kyber registered [ 1.733975] soc soc0: Amlogic Meson8m2 (S812) RevA (1d - 0:74E) detected [ 1.736619] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled [ 1.738308] c11084c0.serial: ttyAML6 at MMIO 0xc11084c0 (irq = 20, base_baud = 8854166) is a meson_uart [ 1.738419] serial serial0: tty port ttyAML6 registered [ 1.738605] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 29, base_baud = 8854166) is a meson_uart [ 2.647426] printk: console [ttyAML0] enabled [ 2.652895] usbcore: registered new interface driver udl [ 2.663774] brd: module loaded [ 2.669410] loop: module loaded [ 2.669441] dummy-irq: no IRQ given. Use irq=N [ 2.672242] Loading iSCSI transport class v2.0-870. [ 2.676646] rdac: device handler registered [ 2.680523] hp_sw: device handler registered [ 2.684716] emc: device handler registered [ 2.688851] alua: device handler registered [ 2.693152] iscsi: registered transport (tcp) [ 2.697829] SSFDC read-only Flash Translation layer [ 2.702132] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.709514] libphy: Fixed MDIO Bus: probed [ 2.712793] tun: Universal TUN/TAP device driver, 1.6 [ 2.717783] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 2.725445] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu> [ 2.737039] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.740440] ehci-platform: EHCI generic platform driver [ 2.745760] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.751804] ohci-platform: OHCI generic platform driver [ 2.757393] usbcore: registered new interface driver usb-storage [ 2.762992] udc-core: couldn't find an available UDC - added [g_ether] to list of pending drivers [ 2.771933] mousedev: PS/2 mouse device common for all mice [ 2.777958] i2c /dev entries driver [ 2.781175] pps_ldisc: PPS line discipline registered [ 2.787040] usbcore: registered new interface driver pcwd_usb [ 2.792078] meson_wdt c1109900.watchdog: Watchdog enabled (timeout=8 sec, nowayout=1) [ 2.799699] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=1) [ 2.807927] VCCK: supplied by VCC5V [ 2.811550] core: _opp_supported_by_regulators: OPP minuV: 825000 maxuV: 825000, not supported by regulator [ 2.820981] cpu cpu0: _opp_add: OPP not supported by regulators (96000000) [ 2.827922] core: _opp_supported_by_regulators: OPP minuV: 825000 maxuV: 825000, not supported by regulator [ 2.837536] cpu cpu0: _opp_add: OPP not supported by regulators (192000000) [ 2.844524] core: _opp_supported_by_regulators: OPP minuV: 825000 maxuV: 825000, not supported by regulator [ 2.854171] cpu cpu0: _opp_add: OPP not supported by regulators (312000000) [ 2.861174] core: _opp_supported_by_regulators: OPP minuV: 825000 maxuV: 825000, not supported by regulator [ 2.870810] cpu cpu0: _opp_add: OPP not supported by regulators (408000000) [ 2.877796] core: _opp_supported_by_regulators: OPP minuV: 825000 maxuV: 825000, not supported by regulator [ 2.887453] cpu cpu0: _opp_add: OPP not supported by regulators (504000000) [ 2.894452] core: _opp_supported_by_regulators: OPP minuV: 850000 maxuV: 850000, not supported by regulator [ 2.904095] cpu cpu0: _opp_add: OPP not supported by regulators (600000000) [ 2.911102] core: _opp_supported_by_regulators: OPP minuV: 850000 maxuV: 850000, not supported by regulator [ 2.920741] cpu cpu0: _opp_add: OPP not supported by regulators (720000000) [ 2.927726] core: _opp_supported_by_regulators: OPP minuV: 875000 maxuV: 875000, not supported by regulator [ 2.937383] cpu cpu0: _opp_add: OPP not supported by regulators (816000000) [ 2.944388] core: _opp_supported_by_regulators: OPP minuV: 925000 maxuV: 925000, not supported by regulator [ 2.954026] cpu cpu0: _opp_add: OPP not supported by regulators (1008000000) [ 2.961176] core: _opp_supported_by_regulators: OPP minuV: 1025000 maxuV: 1025000, not supported by regulator [ 2.970934] cpu cpu0: _opp_add: OPP not supported by regulators (1416000000) [ 2.978008] core: _opp_supported_by_regulators: OPP minuV: 1100000 maxuV: 1100000, not supported by regulator [ 2.987833] cpu cpu0: _opp_add: OPP not supported by regulators (1608000000) [ 2.995115] thermal thermal_zone0: binding zone soc with cdev thermal-cpufreq-0 failed:-22 [ 3.003589] sdhci: Secure Digital Host Controller Interface driver [ 3.009258] sdhci: Copyright(c) Pierre Ossman [ 3.013792] usbcore: registered new interface driver ushc [ 3.019857] VCC3V3: supplied by VCC5V [ 3.022781] meson-mx-sdhc c1108e00.mmc: Got CD GPIO [ 3.054062] platform c1108c20.mmc:slot@0: allocated mmc-pwrseq [ 3.080319] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.081523] ledtrig-cpu: registered to indicate activity on CPUs [ 3.086614] hid: raw HID events driver (C) Jiri Kosina [ 3.091660] usbcore: registered new interface driver usbhid [ 3.094147] mmc0: new high speed SDXC card at address e624 [ 3.096997] usbhid: USB HID core driver [ 3.097286] remoteproc remoteproc0: meson-mx-ao-arc is available [ 3.102811] mmcblk0: mmc0:e624 SC64G 59.5 GiB [ 3.106428] remoteproc remoteproc0: Direct firmware load for rproc-meson-mx-ao-arc-fw failed with error -2 [ 3.113439] VCC1V8: supplied by VCC5V [ 3.116700] remoteproc remoteproc0: powering up meson-mx-ao-arc [ 3.126344] mmcblk0: p1 p2 [ 3.130001] remoteproc remoteproc0: Direct firmware load for rproc-meson-mx-ao-arc-fw failed with error -2 [ 3.138317] no UART detected at 0x1 [ 3.138630] remoteproc remoteproc0: request_firmware failed: -2 [ 3.150319] oprofile: using arm/armv7-ca9 [ 3.161757] NET: Registered protocol family 26 [ 3.166010] GACT probability on [ 3.169117] Mirror/redirect action on [ 3.172768] Simple TC action Loaded [ 3.176546] netem: version 1.3 [ 3.179285] u32 classifier [ 3.181950] Performance counters on [ 3.185755] input device check on [ 3.189393] Actions configured [ 3.212451] xt_time: kernel timezone is -0000 [ 3.212506] IPVS: Registered protocols () [ 3.215187] IPVS: Connection hash table configured (size=4096, memory=32Kbytes) [ 3.223083] IPVS: ipvs loaded. [ 3.225639] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.231259] gre: GRE over IPv4 demultiplexor driver [ 3.235822] ip_gre: GRE over IPv4 tunneling driver [ 3.241319] IPv4 over IPsec tunneling driver [ 3.245530] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully [ 3.251276] Initializing XFRM netlink socket [ 3.255416] IPsec XFRM device driver [ 3.259373] NET: Registered protocol family 10 [ 3.302791] Segment Routing with IPv6 [ 3.302935] mip6: Mobile IPv6 [ 3.304644] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.310410] ip6_gre: GRE over IPv6 tunneling driver [ 3.314924] NET: Registered protocol family 17 [ 3.318979] NET: Registered protocol family 15 [ 3.323453] Bridge firewalling registered [ 3.327556] NET: Registered protocol family 5 [ 3.331823] NET: Unregistered protocol family 5 [ 3.336363] 8021q: 802.1Q VLAN Support v1.8 [ 3.348948] DCCP: Activated CCID 2 (TCP-like) [ 3.348995] DCCP: Activated CCID 3 (TCP-Friendly Rate Control) [ 3.353895] sctp: Hash tables configured (bind 512/512) [ 3.359094] NET: Registered protocol family 21 [ 3.363189] Registered RDS/tcp transport [ 3.367119] 9pnet: Installing 9P2000 support [ 3.371327] Key type dns_resolver registered [ 3.375531] openvswitch: Open vSwitch switching datapath [ 3.381201] NET: Registered protocol family 40 [ 3.385264] mpls_gso: MPLS GSO support [ 3.389401] ThumbEE CPU extension supported. [ 3.393199] Registering SWP/SWPB emulation handler [ 3.456371] registered taskstats version 1 [ 3.456408] Loading compiled-in X.509 certificates [ 3.459756] Key type ._fscrypt registered [ 3.463644] Key type .fscrypt registered [ 3.467506] Key type fscrypt-provisioning registered [ 3.473160] Btrfs loaded, crc32c=crc32c-generic [ 3.489631] meson-drm d0100000.vpu: Queued 3 outputs on vpu [ 3.489864] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.496695] meson-drm d0100000.vpu: bound d0042000.hdmi-tx (ops 0xc143448c) [ 3.503537] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 0 [ 3.609289] [drm] kms: can't enable cloning when we probably wanted to. [ 3.652501] meson-drm d0100000.vpu: meson_vclk_setup(1, 594000, 594000, 594000, 0) [ 3.892355] ------------[ cut here ]------------ [ 3.892372] WARNING: CPU: 0 PID: 12 at drivers/gpu/drm/drm_atomic_helper.c:1495 drm_atomic_helper_wait_for_vblanks.part.1+0x2a0/0x2a8 [ 3.892375] [CRTC:42:meson_crtc] vblank wait timed out [ 3.892376] Modules linked in: [ 3.892385] CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.7.0-rc6-aml-s812 #20.05.5 [ 3.892387] Hardware name: Amlogic Meson platform [ 3.892396] Workqueue: events deferred_probe_work_func [ 3.892415] [<c030f744>] (unwind_backtrace) from [<c030ab3c>] (show_stack+0x10/0x14) [ 3.892423] [<c030ab3c>] (show_stack) from [<c0a68700>] (dump_stack+0xc0/0xd4) [ 3.892431] [<c0a68700>] (dump_stack) from [<c0335ce0>] (__warn+0xbc/0xd8) [ 3.892438] [<c0335ce0>] (__warn) from [<c0335d90>] (warn_slowpath_fmt+0x94/0xb8) [ 3.892447] [<c0335d90>] (warn_slowpath_fmt) from [<c0b33c68>] (drm_atomic_helper_wait_for_vblanks.part.1+0x2a0/0x2a8) [ 3.892457] [<c0b33c68>] (drm_atomic_helper_wait_for_vblanks.part.1) from [<c0b366dc>] (drm_atomic_helper_commit_tail_rpm+0x5c/0x6c) [ 3.892464] [<c0b366dc>] (drm_atomic_helper_commit_tail_rpm) from [<c0b36564>] (commit_tail+0x9c/0x1b0) [ 3.892471] [<c0b36564>] (commit_tail) from [<c0b37190>] (drm_atomic_helper_commit+0x134/0x158) [ 3.892480] [<c0b37190>] (drm_atomic_helper_commit) from [<c0b65264>] (drm_client_modeset_commit_atomic+0x16c/0x210) [ 3.892487] [<c0b65264>] (drm_client_modeset_commit_atomic) from [<c0b65360>] (drm_client_modeset_commit_locked+0x58/0x184) [ 3.892494] [<c0b65360>] (drm_client_modeset_commit_locked) from [<c0b3c7c4>] (drm_fb_helper_pan_display+0xc8/0x1dc) [ 3.892502] [<c0b3c7c4>] (drm_fb_helper_pan_display) from [<c0aa2b1c>] (fb_pan_display+0x9c/0x110) [ 3.892511] [<c0aa2b1c>] (fb_pan_display) from [<c0ab0a74>] (bit_update_start+0x14/0x30) [ 3.892517] [<c0ab0a74>] (bit_update_start) from [<c0aaec04>] (fbcon_switch+0x348/0x498) [ 3.892525] [<c0aaec04>] (fbcon_switch) from [<c0af5be4>] (redraw_screen+0xdc/0x258) [ 3.892531] [<c0af5be4>] (redraw_screen) from [<c0aaf0e8>] (fbcon_prepare_logo+0x394/0x410) [ 3.892537] [<c0aaf0e8>] (fbcon_prepare_logo) from [<c0aaf5d0>] (fbcon_init+0x46c/0x578) [ 3.892542] [<c0aaf5d0>] (fbcon_init) from [<c0af48b8>] (visual_init+0xbc/0x104) [ 3.892548] [<c0af48b8>] (visual_init) from [<c0af5f40>] (do_bind_con_driver+0x1e0/0x3bc) [ 3.892554] [<c0af5f40>] (do_bind_con_driver) from [<c0af646c>] (do_take_over_console+0x138/0x1d4) [ 3.892560] [<c0af646c>] (do_take_over_console) from [<c0aab6c8>] (do_fbcon_takeover+0x74/0xd4) [ 3.892566] [<c0aab6c8>] (do_fbcon_takeover) from [<c0aa3770>] (register_framebuffer+0x204/0x2d8) [ 3.892572] [<c0aa3770>] (register_framebuffer) from [<c0b3b468>] (__drm_fb_helper_initial_config_and_unlock+0x3a4/0x550) [ 3.892578] [<c0b3b468>] (__drm_fb_helper_initial_config_and_unlock) from [<c0b3bbf8>] (drm_fbdev_client_hotplug+0xdc/0x194) [ 3.892584] [<c0b3bbf8>] (drm_fbdev_client_hotplug) from [<c0b3bd64>] (drm_fbdev_generic_setup+0x94/0x110) [ 3.892592] [<c0b3bd64>] (drm_fbdev_generic_setup) from [<c0b771cc>] (meson_drv_bind_master+0x404/0x51c) [ 3.892603] [<c0b771cc>] (meson_drv_bind_master) from [<c0b98364>] (try_to_bring_up_master+0x160/0x1a8) [ 3.892609] [<c0b98364>] (try_to_bring_up_master) from [<c0b987a4>] (component_master_add_with_match+0xc4/0xf8) [ 3.892615] [<c0b987a4>] (component_master_add_with_match) from [<c0b773ac>] (meson_drv_probe+0xc8/0x100) [ 3.892622] [<c0b773ac>] (meson_drv_probe) from [<c0ba0b94>] (platform_drv_probe+0x48/0x98) [ 3.892628] [<c0ba0b94>] (platform_drv_probe) from [<c0b9ede8>] (really_probe+0x1e0/0x344) [ 3.892635] [<c0b9ede8>] (really_probe) from [<c0b9f060>] (driver_probe_device+0x60/0x168) [ 3.892641] [<c0b9f060>] (driver_probe_device) from [<c0b9d250>] (bus_for_each_drv+0x80/0xc4) [ 3.892648] [<c0b9d250>] (bus_for_each_drv) from [<c0b9eb94>] (__device_attach+0xd0/0x13c) [ 3.892654] [<c0b9eb94>] (__device_attach) from [<c0b9defc>] (bus_probe_device+0x84/0x8c) [ 3.892660] [<c0b9defc>] (bus_probe_device) from [<c0b9e384>] (deferred_probe_work_func+0x64/0x90) [ 3.892668] [<c0b9e384>] (deferred_probe_work_func) from [<c03502a8>] (process_one_work+0x218/0x474) [ 3.892675] [<c03502a8>] (process_one_work) from [<c0350548>] (worker_thread+0x44/0x5d4) [ 3.892681] [<c0350548>] (worker_thread) from [<c0356acc>] (kthread+0x14c/0x150) [ 3.892688] [<c0356acc>] (kthread) from [<c0300148>] (ret_from_fork+0x14/0x2c) [ 3.892691] Exception stack(0xc02b3fb0 to 0xc02b3ff8) [ 3.892695] 3fa0: 00000000 00000000 00000000 00000000 [ 3.892700] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 3.892705] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 3.892708] ---[ end trace 181c12cfe8f5e5e6 ]--- [ 4.036558] Console: switching to colour frame buffer device 480x135 [ 4.637103] meson-drm d0100000.vpu: fb0: mesondrmfb frame buffer device [ 4.644482] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found [ 4.650281] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found [ 4.656516] meson8b-dwmac c9410000.ethernet: PTP uses main clock [ 4.663062] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37 [ 4.669536] meson8b-dwmac c9410000.ethernet: DWMAC1000 [ 4.674724] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported [ 4.682175] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported [ 4.689629] meson8b-dwmac c9410000.ethernet: COE Type 2 [ 4.694829] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported [ 4.701851] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported [ 4.708293] meson8b-dwmac c9410000.ethernet: Normal descriptors [ 4.714161] meson8b-dwmac c9410000.ethernet: Ring mode enabled [ 4.719967] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 4.727946] meson8b-dwmac c9410000.ethernet: device MAC address de:eb:80:66:00:d3 [ 4.735684] libphy: stmmac: probed [ 4.768646] dwc2 c9040000.usb: supply vusb_d not found, using dummy regulator [ 4.770388] dwc2 c9040000.usb: supply vusb_a not found, using dummy regulator [ 4.789092] dwc2 c9040000.usb: DWC OTG Controller [ 4.789268] dwc2 c9040000.usb: new USB bus registered, assigned bus number 1 [ 4.795356] dwc2 c9040000.usb: irq 31, io mem 0xc9040000 [ 4.800743] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07 [ 4.808847] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.816038] usb usb1: Product: DWC OTG Controller [ 4.820718] usb usb1: Manufacturer: Linux 5.7.0-rc6-aml-s812 dwc2_hsotg [ 4.827305] usb usb1: SerialNumber: c9040000.usb [ 4.832302] hub 1-0:1.0: USB hub found [ 4.835654] hub 1-0:1.0: 1 port detected [ 4.840115] dwc2 c90c0000.usb: supply vusb_d not found, using dummy regulator [ 4.846691] dwc2 c90c0000.usb: supply vusb_a not found, using dummy regulator [ 4.912553] dwc2 c90c0000.usb: DWC OTG Controller [ 4.912723] dwc2 c90c0000.usb: new USB bus registered, assigned bus number 2 [ 4.918808] dwc2 c90c0000.usb: irq 32, io mem 0xc90c0000 [ 4.924188] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07 [ 4.932303] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.939495] usb usb2: Product: DWC OTG Controller [ 4.944175] usb usb2: Manufacturer: Linux 5.7.0-rc6-aml-s812 dwc2_hsotg [ 4.950763] usb usb2: SerialNumber: c90c0000.usb [ 4.955723] hub 2-0:1.0: USB hub found [ 4.959112] hub 2-0:1.0: 1 port detected [ 4.964232] meson-mx-ao-arc-firmware ao-arc-firmware: Failed to request mbox channel #0 [ 4.974608] printk: console [netcon0] enabled [ 4.975284] netconsole: network logging started [ 4.980211] ALSA device list: [ 4.982797] No soundcards found. [ 4.986826] Freeing unused kernel memory: 1024K [ 4.992716] Run /init as init process [ 5.010221] with arguments: [ 5.010224] /init [ 5.010226] with environment: [ 5.010228] HOME=/ [ 5.010230] TERM=linux [ 5.010232] logo=osd1,loaded,0x7900000,${hdmimode},full [ 5.010443] process '/usr/bin/sh' started with executable stack [ 5.356382] usb 2-1: new full-speed USB device number 2 using dwc2 [ 5.358405] input: adc-keys as /devices/platform/adc-keys/input/input0 [ 5.586271] usb 2-1: New USB device found, idVendor=1b1c, idProduct=1b0a, bcdDevice= 1.03 [ 5.606745] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.626107] usb 2-1: Product: Corsair K30A Gaming Keyboard [ 5.643991] usb 2-1: Manufacturer: Corsair [ 5.664297] input: Corsair Corsair K30A Gaming Keyboard as /devices/platform/soc/c90c0000.usb/usb2/2-1/2-1:1.0/0003:1B1C:1B0A.0001/input/input1 [ 5.708377] random: fast init done [ 5.748894] hid-generic 0003:1B1C:1B0A.0001: input,hidraw0: USB HID v1.11 Keyboard [Corsair Corsair K30A Gaming Keyboard] on usb-c90c0000.usb-1/input0 [ 5.780303] input: Corsair Corsair K30A Gaming Keyboard as /devices/platform/soc/c90c0000.usb/usb2/2-1/2-1:1.1/0003:1B1C:1B0A.0002/input/input2 [ 5.864629] hid-generic 0003:1B1C:1B0A.0002: input,hidraw1: USB HID v1.11 Device [Corsair Corsair K30A Gaming Keyboard] on usb-c90c0000.usb-1/input1 [ 5.894278] input: Corsair Corsair K30A Gaming Keyboard as /devices/platform/soc/c90c0000.usb/usb2/2-1/2-1:1.2/0003:1B1C:1B0A.0003/input/input3 [ 5.980792] hid-generic 0003:1B1C:1B0A.0003: input,hidraw2: USB HID v1.11 Keyboard [Corsair Corsair K30A Gaming Keyboard] on usb-c90c0000.usb-1/input2 [ 6.152817] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 6.174168] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 6.195632] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 6.218186] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 6.279516] mmc1: new high speed SDIO card at address 0001 [ 6.812040] EXT4-fs (mmcblk0p2): mounted filesystem with writeback data mode. Opts: data=writeback [ 7.860612] systemd[1]: System time before build time, advancing clock. [ 7.922683] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 7.958738] systemd[1]: Detected architecture arm. [ 8.065463] systemd[1]: Set hostname to <aml-s812>. [ 8.395101] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 8.426542] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 8.686414] random: crng init done [ 8.795042] systemd[1]: Listening on udev Control Socket. [ 8.837283] systemd[1]: Listening on udev Kernel Socket. [ 8.879007] systemd[1]: Listening on Journal Socket. [ 8.925216] systemd[1]: Mounting Kernel Debug File System... [ 8.986355] systemd[1]: Starting Load Kernel Modules... [ 9.355607] EXT4-fs (mmcblk0p2): re-mounted. Opts: commit=600,errors=remount-ro [ 10.594691] VDD_EE: supplied by VCC5V [ 10.603634] lima d00c0000.gpu: IRQ ppmmu3 not found [ 10.603739] lima d00c0000.gpu: IRQ ppmmu7 not found [ 10.603754] lima d00c0000.gpu: gp - mali450 version major 0 minor 0 [ 10.603791] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0 [ 10.603904] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0 [ 10.603947] lima d00c0000.gpu: pp2 - mali450 version major 0 minor 0 [ 10.603985] lima d00c0000.gpu: IRQ pp3 not found [ 10.604001] lima d00c0000.gpu: pp4 - mali450 version major 0 minor 0 [ 10.604036] lima d00c0000.gpu: pp5 - mali450 version major 0 minor 0 [ 10.604071] lima d00c0000.gpu: pp6 - mali450 version major 0 minor 0 [ 10.604103] lima d00c0000.gpu: IRQ pp7 not found [ 10.604110] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus [ 10.604120] lima d00c0000.gpu: l2 cache 128K, 4-way, 64byte cache line, 128bit external bus [ 10.604128] lima d00c0000.gpu: l2 cache 128K, 4-way, 64byte cache line, 128bit external bus [ 10.605023] lima d00c0000.gpu: bus rate = 141666667 [ 10.605029] lima d00c0000.gpu: mod rate = 24000000 [ 10.605106] debugfs: Directory 'd00c0000.gpu-mali' with parent 'VDD_EE' already present! [ 10.607796] [drm] Initialized lima 1.1.0 20191231 for d00c0000.gpu on minor 1 [ 10.676437] Bluetooth: Core ver 2.22 [ 10.676441] Bluetooth: Starting self testing [ 10.709294] es7134 i2s-audio-codec: supply VDD not found, using dummy regulator [ 10.709430] gx-sound-card sound: snd-soc-dummy-dai <-> I2S FIFO mapping ok [ 10.712757] Bluetooth: ECDH test passed in 35456 usecs [ 10.716147] Registered IR keymap rc-empty [ 10.716252] rc rc0: meson-ir as /devices/platform/soc/c8100000.aobus/c8100480.ir-receiver/rc/rc0 [ 10.716534] rc rc0: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter [ 10.716711] input: meson-ir as /devices/platform/soc/c8100000.aobus/c8100480.ir-receiver/rc/rc0/input4 [ 10.718397] meson-ir c8100480.ir-receiver: receiver initialized [ 10.721001] gx-sound-card sound: snd-soc-dummy-dai <-> SPDIF FIFO mapping ok [ 10.725011] gx-sound-card sound: es7134-hifi <-> I2S Encoder mapping ok [ 10.725037] gx-sound-card sound: dit-hifi <-> SPDIF Encoder mapping ok [ 10.758351] Bluetooth: SMP test passed in 5966 usecs [ 10.758473] Bluetooth: Finished self testing [ 10.758541] NET: Registered protocol family 31 [ 10.758545] Bluetooth: HCI device and connection manager initialized [ 10.758558] Bluetooth: HCI socket layer initialized [ 10.758564] Bluetooth: L2CAP socket layer initialized [ 10.758579] Bluetooth: SCO socket layer initialized [ 10.857703] Bluetooth: HCI UART driver ver 2.3 [ 10.857715] Bluetooth: HCI UART protocol H4 registered [ 10.857723] Bluetooth: HCI UART protocol BCSP registered [ 10.857812] Bluetooth: HCI UART protocol LL registered [ 10.857816] Bluetooth: HCI UART protocol ATH3K registered [ 10.858312] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 10.858509] Bluetooth: HCI UART protocol Intel registered [ 10.858733] Bluetooth: HCI UART protocol Broadcom registered [ 10.858792] Bluetooth: HCI UART protocol QCA registered [ 10.858798] Bluetooth: HCI UART protocol AG6XX registered [ 10.858841] Bluetooth: HCI UART protocol Marvell registered [ 10.925748] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 10.988920] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 10.992692] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 10.992702] cfg80211: failed to load regulatory.db [ 11.148699] brcmfmac: F1 signature read @0x18000000=0x16044330 [ 11.156578] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4330-sdio for chip BCM4330/4 [ 11.156747] usbcore: registered new interface driver brcmfmac [ 11.185047] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac4330-sdio.akaso,m8s.txt failed with error -2 [ 11.645155] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4330-sdio for chip BCM4330/4 [ 11.645223] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [ 11.648591] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4330/4 wl0: Oct 25 2011 19:34:12 version 5.90.125.104 [ 11.748420] ------------[ cut here ]------------ [ 11.748445] WARNING: CPU: 0 PID: 646 at drivers/gpu/drm/drm_atomic_helper.c:1495 drm_atomic_helper_wait_for_vblanks.part.1+0x2a0/0x2a8 [ 11.748448] [CRTC:42:meson_crtc] vblank wait timed out [ 11.748449] Modules linked in: brcmfmac brcmutil cfg80211 hci_uart btqca btrtl btbcm btintel joydev ao_cec meson_ir snd_soc_spdif_tx bluetooth rfkill lima snd_soc_es7134 gpu_sched adc_keys [ 11.748479] CPU: 0 PID: 646 Comm: setfont Tainted: G W 5.7.0-rc6-aml-s812 #20.05.5 [ 11.748481] Hardware name: Amlogic Meson platform [ 11.748496] [<c030f744>] (unwind_backtrace) from [<c030ab3c>] (show_stack+0x10/0x14) [ 11.748504] [<c030ab3c>] (show_stack) from [<c0a68700>] (dump_stack+0xc0/0xd4) [ 11.748512] [<c0a68700>] (dump_stack) from [<c0335ce0>] (__warn+0xbc/0xd8) [ 11.748518] [<c0335ce0>] (__warn) from [<c0335d90>] (warn_slowpath_fmt+0x94/0xb8) [ 11.748526] [<c0335d90>] (warn_slowpath_fmt) from [<c0b33c68>] (drm_atomic_helper_wait_for_vblanks.part.1+0x2a0/0x2a8) [ 11.748536] [<c0b33c68>] (drm_atomic_helper_wait_for_vblanks.part.1) from [<c0b366dc>] (drm_atomic_helper_commit_tail_rpm+0x5c/0x6c) [ 11.748543] [<c0b366dc>] (drm_atomic_helper_commit_tail_rpm) from [<c0b36564>] (commit_tail+0x9c/0x1b0) [ 11.748550] [<c0b36564>] (commit_tail) from [<c0b37190>] (drm_atomic_helper_commit+0x134/0x158) [ 11.748559] [<c0b37190>] (drm_atomic_helper_commit) from [<c0b65264>] (drm_client_modeset_commit_atomic+0x16c/0x210) [ 11.748566] [<c0b65264>] (drm_client_modeset_commit_atomic) from [<c0b65360>] (drm_client_modeset_commit_locked+0x58/0x184) [ 11.748574] [<c0b65360>] (drm_client_modeset_commit_locked) from [<c0b3c7c4>] (drm_fb_helper_pan_display+0xc8/0x1dc) [ 11.748581] [<c0b3c7c4>] (drm_fb_helper_pan_display) from [<c0aa2b1c>] (fb_pan_display+0x9c/0x110) [ 11.748589] [<c0aa2b1c>] (fb_pan_display) from [<c0ab0a74>] (bit_update_start+0x14/0x30) [ 11.748595] [<c0ab0a74>] (bit_update_start) from [<c0aaec04>] (fbcon_switch+0x348/0x498) [ 11.748602] [<c0aaec04>] (fbcon_switch) from [<c0af5be4>] (redraw_screen+0xdc/0x258) [ 11.748610] [<c0af5be4>] (redraw_screen) from [<c0aae770>] (fbcon_do_set_font+0x20c/0x278) [ 11.748615] [<c0aae770>] (fbcon_do_set_font) from [<c0aafca4>] (fbcon_set_font+0x1e8/0x21c) [ 11.748622] [<c0aafca4>] (fbcon_set_font) from [<c0afb03c>] (con_font_op+0x3b0/0x4e8) [ 11.748630] [<c0afb03c>] (con_font_op) from [<c0aec874>] (vt_ioctl+0xccc/0x1790) [ 11.748637] [<c0aec874>] (vt_ioctl) from [<c0adb824>] (tty_ioctl+0x274/0xb04) [ 11.748645] [<c0adb824>] (tty_ioctl) from [<c049e004>] (ksys_ioctl+0x1cc/0xb80) [ 11.748652] [<c049e004>] (ksys_ioctl) from [<c0300240>] (__sys_trace_return+0x0/0x20) [ 11.748656] Exception stack(0xeb8adfa8 to 0xeb8adff0) [ 11.748661] dfa0: 00000200 00000010 00000003 00004b72 beaf432c 00000000 [ 11.748666] dfc0: 00000200 00000010 018166d0 00000036 004c3000 b6fc4968 beaf432c 00000008 [ 11.748670] dfe0: 004c3064 beaf4304 004b02bf b6f36f08 [ 11.748674] ---[ end trace 181c12cfe8f5e5e7 ]--- [ 12.288395] ------------[ cut here ]------------ [ 12.288414] WARNING: CPU: 2 PID: 659 at drivers/gpu/drm/drm_atomic_helper.c:1495 drm_atomic_helper_wait_for_vblanks.part.1+0x2a0/0x2a8 [ 12.288417] [CRTC:42:meson_crtc] vblank wait timed out [ 12.288419] Modules linked in: brcmfmac brcmutil cfg80211 hci_uart btqca btrtl btbcm btintel joydev ao_cec meson_ir snd_soc_spdif_tx bluetooth rfkill lima snd_soc_es7134 gpu_sched adc_keys [ 12.288449] CPU: 2 PID: 659 Comm: setfont Tainted: G W 5.7.0-rc6-aml-s812 #20.05.5 [ 12.288451] Hardware name: Amlogic Meson platform [ 12.288467] [<c030f744>] (unwind_backtrace) from [<c030ab3c>] (show_stack+0x10/0x14) [ 12.288475] [<c030ab3c>] (show_stack) from [<c0a68700>] (dump_stack+0xc0/0xd4) [ 12.288483] [<c0a68700>] (dump_stack) from [<c0335ce0>] (__warn+0xbc/0xd8) [ 12.288490] [<c0335ce0>] (__warn) from [<c0335d90>] (warn_slowpath_fmt+0x94/0xb8) [ 12.288498] [<c0335d90>] (warn_slowpath_fmt) from [<c0b33c68>] (drm_atomic_helper_wait_for_vblanks.part.1+0x2a0/0x2a8) [ 12.288508] [<c0b33c68>] (drm_atomic_helper_wait_for_vblanks.part.1) from [<c0b366dc>] (drm_atomic_helper_commit_tail_rpm+0x5c/0x6c) [ 12.288515] [<c0b366dc>] (drm_atomic_helper_commit_tail_rpm) from [<c0b36564>] (commit_tail+0x9c/0x1b0) [ 12.288522] [<c0b36564>] (commit_tail) from [<c0b37190>] (drm_atomic_helper_commit+0x134/0x158) [ 12.288531] [<c0b37190>] (drm_atomic_helper_commit) from [<c0b65264>] (drm_client_modeset_commit_atomic+0x16c/0x210) [ 12.288538] [<c0b65264>] (drm_client_modeset_commit_atomic) from [<c0b65360>] (drm_client_modeset_commit_locked+0x58/0x184) [ 12.288545] [<c0b65360>] (drm_client_modeset_commit_locked) from [<c0b3c7c4>] (drm_fb_helper_pan_display+0xc8/0x1dc) [ 12.288553] [<c0b3c7c4>] (drm_fb_helper_pan_display) from [<c0aa2b1c>] (fb_pan_display+0x9c/0x110) [ 12.288561] [<c0aa2b1c>] (fb_pan_display) from [<c0ab0a74>] (bit_update_start+0x14/0x30) [ 12.288567] [<c0ab0a74>] (bit_update_start) from [<c0aaec04>] (fbcon_switch+0x348/0x498) [ 12.288574] [<c0aaec04>] (fbcon_switch) from [<c0af5be4>] (redraw_screen+0xdc/0x258) [ 12.288580] [<c0af5be4>] (redraw_screen) from [<c0aae770>] (fbcon_do_set_font+0x20c/0x278) [ 12.288586] [<c0aae770>] (fbcon_do_set_font) from [<c0aafca4>] (fbcon_set_font+0x1e8/0x21c) [ 12.288593] [<c0aafca4>] (fbcon_set_font) from [<c0afb03c>] (con_font_op+0x3b0/0x4e8) [ 12.288600] [<c0afb03c>] (con_font_op) from [<c0aec874>] (vt_ioctl+0xccc/0x1790) [ 12.288608] [<c0aec874>] (vt_ioctl) from [<c0adb824>] (tty_ioctl+0x274/0xb04) [ 12.288615] [<c0adb824>] (tty_ioctl) from [<c049e004>] (ksys_ioctl+0x1cc/0xb80) [ 12.288622] [<c049e004>] (ksys_ioctl) from [<c0300240>] (__sys_trace_return+0x0/0x20) [ 12.288626] Exception stack(0xeb99dfa8 to 0xeb99dff0) [ 12.288631] dfa0: 00000200 00000010 00000003 00004b72 beca832c 00000000 [ 12.288636] dfc0: 00000200 00000010 007c46d0 00000036 00474000 b6f85968 beca832c 00000008 [ 12.288640] dfe0: 00474064 beca8304 004612bf b6ef7f08 [ 12.288643] ---[ end trace 181c12cfe8f5e5e8 ]--- [ 13.169587] systemd[1]: Started File System Check on /dev/disk/by-label/BOOT. [ 13.198274] systemd[1]: Mounting /boot... [ 13.254179] systemd[1]: Mounted /boot. [ 13.275737] systemd[1]: Reached target Local File Systems. [ 13.299932] systemd[1]: Started ifup for eth0. [ 13.323032] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 13.327368] systemd[1]: Starting Armbian ZRAM config... [ 13.358128] systemd[1]: Starting Set console font and keymap... [ 13.387047] systemd[1]: Starting Raise network interfaces... [ 13.419569] systemd[1]: Started Set console font and keymap. [ 13.716602] meson8b-dwmac c9410000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=POLL) [ 13.719046] meson8b-dwmac c9410000.ethernet eth0: No Safety Features support found [ 13.719058] meson8b-dwmac c9410000.ethernet eth0: PTP not supported by HW [ 13.719067] meson8b-dwmac c9410000.ethernet eth0: configuring for phy/rmii link mode [ 17.071354] systemd-journald[865]: Received request to flush runtime journal from PID 1 [ 17.824090] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 17.824176] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 20.864359] rc rc0: two consecutive events of type space [ 22.940383] ieee80211 phy0: brcmf_p2p_create_p2pdev: timeout occurred [ 22.940393] ieee80211 phy0: brcmf_cfg80211_add_iface: add iface p2p-dev-wlan0 type 10 failed: err=-5 [ 35.804352] VCCK: disabling
maybe someone can help?
-
@balbes150 thank you for answering, appreciate it!
@RaptorSDS I get "out of range" signal on my monitor but i can see the picture just fine (it gives an "out of range" signal every few seconds but i can see the console just fine) is there a way to solve it? im using HDMI on a 4K monitor.
For anyone interested I have an M8s+ device with S812/2G ram/8G emmc/1G ethernet, on the board it says S812_M8_Rev1.1 dated 2015/05/21 & the default DTB in balbes150 latest armbian images (meson8m2-mxiii-plus.dtb) works fine but no emmc detected - I tried extracting dtb from the box android 5.1.1 but it doesnt work...
I also have a mecool m8s+ pro with s905x which works out of the box with the images but unfortunately ethernet is only 100 even though its newer...
-
Hello @balbes150
Thank you very much for your hard work and support for breathing life into our old boxes!
I just installed latest bionic from your mega drive on my SD card.
My box is titled "OTT M8s+" (S812 2G/8G) and it works almost fully with the included "meson8m2-mxiii-plus.dtb" file - cpu/memory/network all work!
However it seems it cant detect any emmc memory (i have android on emmc and it boots fine).
Is it because the dtb file is wrong or any other cause? (i have uploaded an armbianmonitor log to http://ix.io/2nkl)
also i couldnt find any nand/emmc installation files on the file system (is it because the emmc is not detected or any other reason?)
Would be very grateful for any insights,
Thanks again!
Armbian for Amlogic S805 and S802/S812
in Amlogic CPU Boxes
Posted · Edited by s812us
@hexdump Thank you very much for the detailed & thorough response!
I have looked at your github with kernel sources & cloned the s812 mainline kernel & your repo. so basically is there any special environment or tools i have to install in order to start compiling the kernel or i can just config, build & apply your patches?
Thanks again for your response it has been very helpful!