[opi prime hangs]

I'll give it a spin from time to time. Thanks again!

[opi prime hangs]

Okay, my stress test runs stable for several hours now with 4.17.4 kernel.

Thumbs up!

[opi prime hangs]

Sharing another bit of feedback.

Decided to give my Prime another try and flashed Armbian_5.38_Orangepiprime_Debian_stretch_next_4.14.14

Then apt update && apt install p7zip-full and ran 7z b

It locked up.

Power cycle. apt upgrade to the latest kernel from June 7th

7z b

Lock up.

 

Powering Prime from XL4005 buck. Soldered to board DC pads

Using genuine A1 class micro SD card.

[pine64: massive date/time clock problem]

Oh. I had strange clock jumps on H3-based boards too. Can that be similar?

[opi prime hangs]

I have similar feedback.

My Prime with headless Stretch and mainline kernel locks up on memory intensive operations (7z b) while seem stable with cpuburn-a53

Arch Linux with 3.10 kernel runs stable on the same hardware and power source.

 

[Orange Pi Zero Plus H5 - overclock]

There is no thermal control for H5 yet, so you really should know what you are doing. If you do - than you'll figure out how to change DVFS

[Orange Pi PC2 doesn't boot]

Unfortunately Etcher does not validate the write on Linux. See this issue

Also try 

sudo sync

before pulling out the card.

Besides SDcard and power supply issues there could be a chance that the board itself is defective. It is a cheap chinese stuff, remember?

[No network after upgrade to 5.30]

FYI headless legacy kernel Orange Pi Plus 2E xenial and jessie updated fine.

Thank you, developers! 

[HOWTO : NFS Server and Client Configuration]

Sorry, but --install-recomends does not work for me on Armbian.

And as I discovered exportfs should be used instead of export

 

Thanks for great tutorial otherwise!

[HOWTO : NFS Server and Client Configuration]

apt-get update ; apt-get upgrade ; apt-get install autofs nfs-kernel-server nfs-common --install-recomends -f -y ;

 

It is 

--install-suggests

And there is another typo:

exportfs -ra