No luck, see kernel panic above. The missing command can be seen below; `Unknown command 'kaslrseed' - try 'help'`:
U-Boot 2022.07-armbian (Aug 22 2023 - 15:26:42 +0000)
SoC: Rockchip rk3399
Reset cause: POR
DRAM: 3.9 GiB
PMIC: RK808
Core: 339 devices, 31 uclasses, devicetree: separate
SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
MMC: mmc@fe320000: 1, mmc@fe330000: 0
Loading Environment from MMC... *** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Model: Helios64
Revision: 1.2 - 4GB non ECC
Net: dw_dm_mdio_init: mdio node is missing, registering legacy mdio busNo ethernet found.
scanning bus for devices...
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot/boot.scr
3252 bytes read in 5 ms (634.8 KiB/s)
## Executing script at 00500000
Boot script loaded from mmc 1
166 bytes read in 4 ms (40 KiB/s)
24417797 bytes read in 1036 ms (22.5 MiB/s)
29792768 bytes read in 1264 ms (22.5 MiB/s)
86670 bytes read in 12 ms (6.9 MiB/s)
2698 bytes read in 8 ms (329.1 KiB/s)
Applying kernel provided DT fixup script (rockchip-fixup.scr)
## Executing script at 09000000
Unknown command 'kaslrseed' - try 'help'
Moving Image from 0x2080000 to 0x2200000, end=3f00000
## Loading init Ramdisk from Legacy Image at 06000000 ...
Image Name: uInitrd
Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
Data Size: 24417733 Bytes = 23.3 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 01f00000
Booting using the fdt blob at 0x1f00000
Loading Ramdisk to f4794000, end f5edd5c5 ... OK
Loading Device Tree to 00000000f4716000, end 00000000f4793fff ... OK
Starting kernel ...
A 2.5" variation for either a SSD based NAS; or a low power NAS with 2.5" HDD's.
Of course the current design could be used for 2.5" drives, but a more compact design would be nice.