Ukhellfire

First official nightly builds https://imola.armbian.com/dl/orangepi3-lts/nightly/

https://mega.nz/file/9sFG2LBT#TsNYnUfNcdPkJgCKFUsYWeKA3R2jJXFVOW-9Vh_H1To
 
This build also has panfrost disabled for time being. It causes issues.
This bypasses the login screen/dm, but it shouldn't be a problem for you.
 
This is also a desktop build. 
Server builds coming shortly! 

@Eemeien
I'll just leave this here 😉

Ironically I've enabled the codec and added a whole load of configs for it! So fingers crossed it's sorted! I only ever just enabled the build for opi3 lts in the build. Only now have I enabled the audio...

So guys... 
Who fancies a test??
 
https://drive.google.com/file/d/1NAFxJAj9CgHNkrPICbQIKsLXZhutQbCo/view?usp=drivesdk
 
This is a bit of a dirty build with the above mentioned fix in place. 
@Kamileon @orangepifan @Rockford the Roe

Woops! I do apologise! Didn't even think about that! 

So...
I've been bringing up the board properly. 
Using the correct dts files for the 3 lts and not the 3. Both for kernel and uboot.
I've created a whole patch set for the Orange Pi 3 LTS now. Ready and waiting for a pull request once I've done a test build. If it boots. And runs, I'll submit the pull request. 
 
One thing I'm not sure off though, is, would it be a wip or a csc? We shall see! Haha!
 
 

Drivers ported. Patches created. 
Patches added to build/userpatches/kernel/sunxi-current.
 
Bit of a hacky approach to adding lines to config files, for modules etc. But want to see if it works first. Then to create patches for them! 
 
Now building a test build 😉
 
So it turns out that the firmware files are already automatically imported into the build! One step forward!
 
Now after putting the modules in the right config file (doh!) I'm running another build.
Unfortunately I won't be able to test until a lot later 😞
 
I'll keep everyone posted! 
Then I guess I'll create the patches, test, and probably bring up the board properly!