Michał Fita

[ 2.336390] ------------[ cut here ]------------ [ 2.336395] WARNING: CPU: 1 PID: 317 at drivers/net/wireless/rtl8812au/core/rtw_odm.c:62 rtw_odm_init_ic_type+0x64/0x88 [88XXau] [ 2.336482] Modules linked in: rpivid_hevc(C) drm_kms_helper brcmfmac 88XXau(+) hci_uart pisp_be brcmutil btbcm snd_soc_core v4l2_mem2mem bluetooth cfg80211 videobuf2_dma_contig snd_compress videobuf2_memops snd_pcm_dmaengine ecdh_generic videobuf2_v4l2 snd_pcm rfkill videodev snd_timer ecc snd videobuf2_common v3d mc dw_axi_dmac_platform raspberrypi_hwmon gpu_sched pwm_brcmstb rp1_adc aes_ce_blk pwm_rp1 drm_shmem_helper aes_ce_cipher polyval_ce polyval_generic ghash_ce sha2_ce sha256_arm64 sha1_ce pwm_fan uio_pdrv_genirq nvmem_rmem uio sch_fq_codel drm i2c_dev drm_panel_orientation_quirks backlight fuse ipv6 macb spidev dwc3 roles phylink i2c_designware_platform i2c_designware_core gpio_brcmstb gpio_generic i2c_brcmstb spi_bcm2835 gpio_keys reset_brcmstb [ 2.336543] CPU: 1 PID: 317 Comm: systemd-udevd Tainted: G C 6.6.45-current-bcm2712 #1 [ 2.336546] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT) [ 2.336547] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.336550] pc : rtw_odm_init_ic_type+0x64/0x88 [88XXau] [ 2.336585] lr : rtw_hal_read_chip_version+0x2c/0x48 [88XXau] [ 2.336619] sp : ffff8000810f3770 [ 2.336620] x29: ffff8000810f3770 x28: 0000000000000000 x27: 00000000ffffffed [ 2.336624] x26: ffffa0003a271080 x25: ffff000100ca0000 x24: ffffa0003a271010 [ 2.336628] x23: ffffa0003a2717c8 x22: ffff000104e6e000 x21: ffff000101465000 [ 2.336631] x20: 0000000000000001 x19: ffff8000810fd000 x18: ffffffffffffffff [ 2.336634] x17: ffffa0003a2104c0 x16: ffffa00084d2fd18 x15: ffff8001010f36f0 [ 2.336637] x14: 0000000000000001 x13: ffff8000810f36f8 x12: ffffa00085618b98 [ 2.336640] x11: 0000000000000002 x10: 000000000000000a x9 : ffffa0003a1e9754 [ 2.336644] x8 : 000000000000000a x7 : 0000000000000004 x6 : 0000000000000029 [ 2.336647] x5 : ffff8000810f36fb x4 : 0000000000000002 x3 : 0000000000000000 [ 2.336650] x2 : 0000000000000000 x1 : 0000000000000004 x0 : ffff8000815a0ed0 [ 2.336653] Call trace: [ 2.336654] rtw_odm_init_ic_type+0x64/0x88 [88XXau] [ 2.336688] rtw_hal_read_chip_version+0x2c/0x48 [88XXau] [ 2.336721] rtw_usb_primary_adapter_init+0x130/0x8a8 [88XXau] [ 2.336754] rtw_usb_primary_adapter_init+0x384/0x8a8 [88XXau] [ 2.336786] usb_probe_interface+0xdc/0x298 [ 2.336791] really_probe+0x150/0x2c0 [ 2.336795] __driver_probe_device+0x80/0x140 [ 2.336797] driver_probe_device+0x44/0x170 [ 2.336800] __driver_attach+0x9c/0x1b0 [ 2.336802] bus_for_each_dev+0x7c/0xe8 [ 2.336804] driver_attach+0x2c/0x40 [ 2.336806] bus_add_driver+0xec/0x218 [ 2.336808] driver_register+0x68/0x138 [ 2.336810] usb_register_driver+0x84/0x180 [ 2.336814] init_module+0x60/0xff8 [88XXau] [ 2.336848] do_one_initcall+0x4c/0x2a0 [ 2.336851] do_init_module+0x60/0x218 [ 2.336856] load_module+0x1c10/0x1d38 [ 2.336858] init_module_from_file+0x8c/0xd8 [ 2.336861] __arm64_sys_finit_module+0x1c0/0x290 [ 2.336865] invoke_syscall+0x50/0x128 [ 2.336869] el0_svc_common.constprop.0+0xd0/0xf8 [ 2.336872] do_el0_svc+0x28/0x40 [ 2.336875] el0_svc+0x48/0x108 [ 2.336879] el0t_64_sync_handler+0x13c/0x158 [ 2.336881] el0t_64_sync+0x190/0x198 [ 2.336884] ---[ end trace 0000000000000000 ]--- [ 2.415424] usb 1-2: 88XXau b0:19:21:6c:6d:18 hw_info[107] [ 2.416755] ------------[ cut here ]------------ [ 2.416769] WARNING: CPU: 1 PID: 317 at drivers/net/wireless/rtl8812au/core/rtw_odm.c:62 rtw_odm_init_ic_type+0x64/0x88 [88XXau] [ 2.416936] Modules linked in: rpivid_hevc(C) drm_kms_helper brcmfmac 88XXau(+) hci_uart pisp_be brcmutil btbcm snd_soc_core v4l2_mem2mem bluetooth cfg80211 videobuf2_dma_contig snd_compress videobuf2_memops snd_pcm_dmaengine ecdh_generic videobuf2_v4l2 snd_pcm rfkill videodev snd_timer ecc snd videobuf2_common v3d mc dw_axi_dmac_platform raspberrypi_hwmon gpu_sched pwm_brcmstb rp1_adc aes_ce_blk pwm_rp1 drm_shmem_helper aes_ce_cipher polyval_ce polyval_generic ghash_ce sha2_ce sha256_arm64 sha1_ce pwm_fan uio_pdrv_genirq nvmem_rmem uio sch_fq_codel drm i2c_dev drm_panel_orientation_quirks backlight fuse ipv6 macb spidev dwc3 roles phylink i2c_designware_platform i2c_designware_core gpio_brcmstb gpio_generic i2c_brcmstb spi_bcm2835 gpio_keys reset_brcmstb [ 2.417033] CPU: 1 PID: 317 Comm: systemd-udevd Tainted: G WC 6.6.45-current-bcm2712 #1 [ 2.417039] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT) [ 2.417042] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.417046] pc : rtw_odm_init_ic_type+0x64/0x88 [88XXau] [ 2.417093] lr : Init_ODM_ComInfo+0x48/0x540 [88XXau] [ 2.417137] sp : ffff8000810f3690 [ 2.417138] x29: ffff8000810f3690 x28: 0000000000000000 x27: 00000000ffffffed [ 2.417143] x26: ffff8000815ac000 x25: ffff000100ca0000 x24: ffff000101465000 [ 2.417148] x23: 00000000ffffffff x22: ffff8000810fd000 x21: ffff80008159d000 [ 2.417152] x20: ffff8000815a0ed0 x19: ffff80008159d000 x18: ffffffffffffffff [ 2.417156] x17: 0000000000000000 x16: ffffa00084d0bc00 x15: 0000000000000068 [ 2.417161] x14: 0000000000003ed0 x13: 0000000000000000 x12: ffffa00085811b60 [ 2.417165] x11: ffff800080000000 x10: ffff0001fef3fe00 x9 : ffffa0003a2017d0 [ 2.417169] x8 : ffff800081100790 x7 : ffffffffffffffff x6 : 000000000000003f [ 2.417174] x5 : 0000000000000040 x4 : 0000000000000008 x3 : 000000000000000c [ 2.417178] x2 : 0000000000000000 x1 : 0000000000000004 x0 : ffff8000815a0ed0 [ 2.417183] Call trace: [ 2.417184] rtw_odm_init_ic_type+0x64/0x88 [88XXau] [ 2.417228] Init_ODM_ComInfo+0x48/0x540 [88XXau] [ 2.417270] rtl8812_init_dm_priv+0x58/0xc8 [88XXau] [ 2.417313] rtw_hal_dm_init+0x28/0x58 [88XXau] [ 2.417356] rtw_init_drv_sw+0x228/0x258 [88XXau] [ 2.417399] rtw_usb_primary_adapter_init+0x158/0x8a8 [88XXau] [ 2.417442] rtw_usb_primary_adapter_init+0x384/0x8a8 [88XXau] [ 2.417484] usb_probe_interface+0xdc/0x298 [ 2.417491] really_probe+0x150/0x2c0 [ 2.417495] __driver_probe_device+0x80/0x140 [ 2.417499] driver_probe_device+0x44/0x170 [ 2.417502] __driver_attach+0x9c/0x1b0 [ 2.417506] bus_for_each_dev+0x7c/0xe8 [ 2.417508] driver_attach+0x2c/0x40 [ 2.417512] bus_add_driver+0xec/0x218 [ 2.417514] driver_register+0x68/0x138 [ 2.417517] usb_register_driver+0x84/0x180 [ 2.417524] init_module+0x60/0xff8 [88XXau] [ 2.417567] do_one_initcall+0x4c/0x2a0 [ 2.417572] do_init_module+0x60/0x218 [ 2.417577] load_module+0x1c10/0x1d38 [ 2.417580] init_module_from_file+0x8c/0xd8 [ 2.417584] __arm64_sys_finit_module+0x1c0/0x290 [ 2.417588] invoke_syscall+0x50/0x128 [ 2.417593] el0_svc_common.constprop.0+0xd0/0xf8 [ 2.417597] do_el0_svc+0x28/0x40 [ 2.417601] el0_svc+0x48/0x108 [ 2.417605] el0t_64_sync_handler+0x13c/0x158 [ 2.417608] el0t_64_sync+0x190/0x198 [ 2.417611] ---[ end trace 0000000000000000 ]--- Anyone seen these? WiFi is not working. Any hints for solution other than downgrade to 6.6.31 we already do? Downgrade instruction: sudo apt install linux-image-current-bcm2712=24.5.1 linux-headers-current-bcm2712=24.5.1 Same symptoms described in https://github.com/aircrack-ng/rtl8812au/issues/1155, they seem to find working patch. Is there any RPi5 maintainer here? Another related: https://github.com/aircrack-ng/rtl8812au/issues/1169

Correction: I figured why it doesn't work at boot. The question remains open for `dtoverlay` userspace. This tool is not versioned, hard to compare what version Armbian is using in comparison with recent Raspberry Pi OS.

Y? `python3-libcamera` would be abstraction over full libcamera, so we rather talking about: https://packages.ubuntu.com/jammy/libcamera0 https://packages.ubuntu.com/jammy/libcamera-dev

I have a `.dts` file built on Raspberry Pi OS for Raspberry Pi 5, that has following section allowing to provide options to both userspace `dtoverlay` and as parameters in `/boot/firmware/config.txt`: __overrides__ { rotation = <&cam_node>,"rotation:0"; orientation = <&cam_node>,"orientation:0"; media-controller = <&csi>,"brcm,media-controller?"; cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>, <&csi_frag>, "target:0=",<&csi0>, <&cam_node>, "VIN-supply:0=",<&cam0_reg>; }; Then following use: sudo dtoverlay -v ovaone cam0=on Overrides proper fields in the overlay fragments on Raspberry Pi OS, but despite overrides being recognized they don't seem to apply and camera driver is starting with wrong I²C attached. The same problem with with `dtparam` in `config.txt` as it works on Raspberry Pi OS, but not on Armbian (I actually wonder how other `dtparam`s work on Armbian). I have to patch the `.dts` file prior to compilation with I²C references replaced for `fragment@100` and `fragment@101`. Our `.dts` is just a little stripped version of original for imx219 camera. Suggestions or explanations welcome.

@Werner you don't keep snapshots like Aptly does???

About 2h ago most of APT repositories (probably in the mirror) became empty and I can't install packages anymore (both my desktop and CI runner): http://armbian.tnahosting.net/apt/dists/jammy/ is totally empty and most other releases as well.

I successfully booted this one and connected over Ethernet. Haven't checked WiFi yet. However, the observation comparing to the original Rockchip's Jammy image: the serial port goes quiet after the U-Boot fires up the kernel. The bootloader on the board and the _original_ kernel use non-standard 1500000 baudrate serial speed for the console. I haven't looked into Armbian's guts yet, but I assume it's a matter of right kernel boot arguments for this board to actually spit out kernel output over serial. What I'm not sure is if the console can be cloned between serial and UI over HDMI (console on the frame buffer if I'm right). I'm open to experimentation and pushing a PR, but hints would be welcome where to look at. Thank you. Disclaimer My company has some plans related to RK3366 being proposed as SBC platform to host our products, hence interest in the Orange Pi 3B - the board we're exercising now. But nothing is set in stone yet. If this succeeds, we may commit to certain maintenance efforts at some later date.

I'm raising my interest as well. I'm interested in joining maintenance efforts, but I'm not able to support anything GUI or graphics related as I have space to work on the board remotely only.