

buvaluy
Members-
Posts
26 -
Joined
-
Last visited
Recent Profile Visitors
1336 profile views
-
What type of m2 key would be better for OP5? Would cheap aliexpress ssd (netac kingspeck) with b+m key be good for it?
-
Does anybody use aliexpress acrilic case for OP5? Does it have enought room for ssd at the bottom?
-
Are there any news about mali driver for s912? I have beelink gt2 with debian-xfce installed. Mouse pointer is blinking... glxinfo show it uses vmware driver...
-
My device RT5370 1) INTEL I tried it on intel PC. It works fine. dmesg has line [ 4098.489842] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 5370 detected [ 4098.525834] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' 2) BANAN dmesg has lines [ 16.911706] usbcore: registered new interface driver rt2870 [ 22.671287] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. Intel has file /usr/lib/firmware/rt2870.bin --- Banan has file /lib/firmware/rt2870.bin intel doesn't have loaded module rt5370sta --- Banan has loaded module rt5370sta May be banan doesn't know about file rt2870.bin?
-
Stil get "phy1 -> rt2x00lib_request_firmware: Error - Failed to request Firmware." I thought rt5370 requires open drivers rt2800lib,rt2800usb,rt2x00usb. It works fine out of the box on intel pc with this drivers, I was able to run it on same bananapi with openwrt. What can this message about firmware mean...?
-
It has't helped (
-
I can't get wifi rt5370 working at banana pi m1 on Ubuntu xenial default desktop. dmesg show: phy1 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. Looks like modules(rt2x00usb,rt2800lib,rt2800usb) are loadede but wifi still don't work.
-
There is link to wiki at s905 topic on the first page.
-
There are only 4 dtb's gxl_p212_1g gxl_p212_2g gxm_q200_2g kvim I also found vega-95 at yandex disk. Where I can get vega-s96?
-
Thanks. Where I can get dtb for beelink gt1? dbt file names on sdcard look strange... I tried gxm_q200_2g and gxl..-2gb, system booted but eth0 didn't get address and fiwi interface didn't present Looks like eht0 didn't work with this 2 dtbs.
-
Did anybody manage to run linux-4.* kernel on beelink gt1 ? I tried Armbian_5.32_S905X_S912_Debian_jessie_4.9.26_server_20170823.img and Armbian_5.32_S905X_S912_Ubuntu_xenial_4.9.26_server_20170823.img Neither of them work for me. I didn't put any dtb just run as it was. No monitor image. No ssh.
-
write image to sd-card update android with file from sd-card(aml_update.zip) boot from sd-card http://freaktab.com/forum/tv-player-support/amlogic-based-tv-players/s905/tronsmart-ac/firmware-roms-tools-at/565449-running-linux-from-sd-card-or-usb-flash-drive-using-balbes150-method-and-files https://yadi.sk/d/5_32km_EsCV2A/ARMBIAN
-
cray: 8core_hotplug 114 8core_ondemand 114 4core_ondemand 114 4core_hotplug 198 ramspeed 8core_hotplug 1460 8core_ondemand 1141 4core_ondemand 5133 4core_hotplug 5103 cpufreq-set -g hotplug, just set 4 first cores to hotpug mode, other stays ondemand.
-
cray 8core/5core/4core 114/166/195 ramspeed 8core/5core/4core 1162/1208/5000
-
I've run tomcat site test. xxx/yyy - (java logic time) /(jsp-time[single thread]) 8 cores 1543/1255 518/932 530/570 579/579 690/365 535/339 688/454 715/384 4 cores 915/530 755/570 572/448 715/285 457/401 453/357 508/261 394/259 467/354 398/191 326/146 Look like 4 cores really better especially jsp(single core) computing. Here is bananapi1(A20) results 965/489 856/558 865/326 1108/556 1044/319 851/532 821/301 851/588 735/284