Angelo Calvão

auto lo
iface lo inet loopback

auto eth0.101
iface eth0.101 inet manual  
   pre-up ip link add br53125 type bridge
   pre-up ip link set wan master br53125
   pre-up bridge vlan add vid 101 dev wan pvid untagged
   pre-up bridge vlan del vid 1 dev wan
   pre-up ip link set wan up
   post-down ip link set wan down
   post-down ip link del dev eth0.101

auto eth0.102
iface eth0.102 inet manual
   pre-up ip link set lan1 master br53125
   pre-up ip link set lan2 master br53125
   pre-up ip link set lan3 master br53125
   pre-up ip link set lan4 master br53125
   pre-up bridge vlan add vid 102 dev lan1 pvid untagged
   pre-up bridge vlan del vid 1 dev lan1
   pre-up ip link set lan1 up
   pre-up bridge vlan add vid 102 dev lan2 pvid untagged
   pre-up bridge vlan del vid 1 dev lan2
   pre-up ip link set lan2 up
   pre-up bridge vlan add vid 102 dev lan3 pvid untagged
   pre-up bridge vlan del vid 1 dev lan3
   pre-up ip link set lan3 up
   pre-up bridge vlan add vid 102 dev lan4 pvid untagged
   pre-up bridge vlan del vid 1 dev lan4
   pre-up ip link set lan4 up
   post-down ip link set lan4 down
   post-down ip link set lan3 down
   post-down ip link set lan2 down
   post-down ip link set lan1 down
   post-down ip link del dev br53125
   post-down ip link del dev eth0.102

allow-hotplug wlan0
iface wlan0 inet manual

iface wlan1 inet static
   address 192.168.0.1/24

auto br0
iface br0 inet static
   bridge_ports eth0.102 wlan0
   address 10.0.0.1/24

auto br1
iface br1 inet dhcp  
   bridge_ports eth0.101

auto dsl-provider
iface dsl-provider inet ppp
provider dsl-provider

I am using this: "Welcome to ARMBIAN 5.31 stable Debian GNU/Linux 8 (jessie) 4.14.84-sunxi".
It works flawless, but I can't update the kernel because of the ethernet. Since I am not an expert, I don't know the issue, everything seems to be recognized on newer kernels but I can't make it work.