davigre

Members
  • Content Count

    11
  • Joined

  • Last visited

About davigre

  • Rank
    Member

Profile Information

  • Gender
    Not Telling

Recent Profile Visitors

346 profile views
  1. Finally make it work: I install 'ntpdupd' deprecated command, but this command achieve the date update at boot: First remove 'ntpd' (To prevent conflict): sudo apt-get remove ntp Then install 'ntpdate' sudo apt-get install ntpdate Run command (need -u option): ntpdate -u pool.ntp.org Repair default ntpdate option so it works at boot: On file /etc/default/ntpdate change the line NTPOPTIONS="" to NTPOPTIONS="-u" . And add this lines on file /etc/network/if-up.d/ntpdate : (To prevent double execution) PATH=/sbin:/bin:/usr/sbin:/usr/bin if [ "$IFACE" != eth0 ]; then exit 0 fi
  2. No previous upgrade of any kind, original 'http://mirror.igorpecovnik.com/Armbian_4.5_Pcduino3nano_Debian_jessie_4.2.3.zip'image installed. I do 3 things: 1. Install a ntp client/server in my router. 2. Update system: apt-get update apt-get upgrade Start-Date: 2016-01-22 21:11:01 Commandline: apt-get upgrade Upgrade: libgssapi-krb5-2:armhf (1.12.1+dfsg-19, 1.12.1+dfsg-19+deb8u1), tzdata:armhf (2015f-0+deb8u1, 2015g-0+deb8u1), libdpkg-perl:armhf (1.17.25, 1.17.26), perl-modules:armhf (5.20.2-3+deb8u1, 5.20.2-3+deb8u2), libirs-export91:armhf (9.9.5.dfsg-9+deb8u2, 9.9.5.dfsg-9+deb8u5), libkrb5-3:armhf (1.12.1+dfsg-19, 1.12.1+dfsg-19+deb8u1), libk5crypto3:armhf (1.12.1+dfsg-19, 1.12.1+dfsg-19+deb8u1), subversion:armhf (1.8.10-6+deb8u1, 1.8.10-6+deb8u2), perl:armhf (5.20.2-3+deb8u1, 5.20.2-3+deb8u2), libdns-export100:armhf (9.9.5.dfsg-9+deb8u2, 9.9.5.dfsg-9+deb8u5), libxml2:armhf (2.9.1+dfsg1-5, 2.9.1+dfsg1-5+deb8u1), fuse:armhf (2.9.3-15+deb8u1, 2.9.3-15+deb8u2), linux-image-next-sunxi:armhf (4.5, 4.81), dpkg:armhf (1.17.25, 1.17.26), libssl-dev:armhf (1.0.1k-3+deb8u1, 1.0.1k-3+deb8u2), linux-headers-next-sunxi:armhf (4.5, 4.81), openssh-sftp-server:armhf (6.7p1-5, 6.7p1-5+deb8u1), dpkg-dev:armhf (1.17.25, 1.17.26), libpng12-0:armhf (1.2.50-2+b2, 1.2.50-2+deb8u2), sudo:armhf (1.8.10p3-1+deb8u2, 1.8.10p3-1+deb8u3), openssh-server:armhf (6.7p1-5, 6.7p1-5+deb8u1), isc-dhcp-client:armhf (4.3.1-6, 4.3.1-6+deb8u2), libisc-export95:armhf (9.9.5.dfsg-9+deb8u2, 9.9.5.dfsg-9+deb8u5), libssl-doc:armhf (1.0.1k-3+deb8u1, 1.0.1k-3+deb8u2), libkrb5support0:armhf (1.12.1+dfsg-19, 1.12.1+dfsg-19+deb8u1), libfuse2:armhf (2.9.3-15+deb8u1, 2.9.3-15+deb8u2), linux-jessie-root-next-pcduino3nano:armhf (4.5, 4.81), perl-base:armhf (5.20.2-3+deb8u1, 5.20.2-3+deb8u2), ntp:armhf (4.2.6.p5+dfsg-7, 4.2.6.p5+dfsg-7+deb8u1), openssl:armhf (1.0.1k-3+deb8u1, 1.0.1k-3+deb8u2), linux-libc-dev:armhf (3.16.7-ckt11-1+deb8u4, 3.16.7-ckt20-1+deb8u3), linux-dtb-next-sunxi:armhf (4.5, 4.81), openssh-client:armhf (6.7p1-5, 6.7p1-5+deb8u1), unzip:armhf (6.0-16, 6.0-16+deb8u2), mysql-common:armhf (5.5.44-0+deb8u1, 5.5.46-0+deb8u1), git:armhf (2.1.4-2.1, 2.1.4-2.1+deb8u1), libicu52:armhf (52.1-8+deb8u2, 52.1-8+deb8u3), libmysqlclient18:armhf (5.5.44-0+deb8u1, 5.5.46-0+deb8u1), libisccfg-export90:armhf (9.9.5.dfsg-9+deb8u2, 9.9.5.dfsg-9+deb8u5), isc-dhcp-common:armhf (4.3.1-6, 4.3.1-6+deb8u2), wpasupplicant:armhf (2.3-1+deb8u1, 2.3-1+deb8u3), linux-firmware-image-next-sunxi:armhf (4.5, 4.81), libssl1.0.0:armhf (1.0.1k-3+deb8u1, 1.0.1k-3+deb8u2), libsvn1:armhf (1.8.10-6+deb8u1, 1.8.10-6+deb8u2), git-man:armhf (2.1.4-2.1, 2.1.4-2.1+deb8u1) End-Date: 2016-01-22 21:26:47 Note 'tzdata' package update. 3. Change the following lines in '/etc/ntp.conf' #server 0.debian.pool.ntp.org iburst #server 1.debian.pool.ntp.org iburst #server 2.debian.pool.ntp.org iburst #server 3.debian.pool.ntp.org iburst server 192.168.1.1 And now... root@pcduino3nano:~# dpkg-reconfigure tzdata Current default time zone: 'America/Bogota' Local time is now: Sun Jan 24 09:49:21 COT 2016. Universal Time is now: Sun Jan 24 14:49:21 UTC 2016. root@pcduino3nano:~# date Sun Jan 24 09:49:28 COT 2016 root@pcduino3nano:~# ntpq -p localhost: timed out, nothing received ***Request timed out root@pcduino3nano:~# Now it works. But to prove it was the 'upgrade process' I unmade the '/etc/ntp.conf' changes: server 0.debian.pool.ntp.org iburst server 1.debian.pool.ntp.org iburst server 2.debian.pool.ntp.org iburst server 3.debian.pool.ntp.org iburst #server 192.168.1.1 and also work, but can't understand why 'ntpq -p' command fails now: root@pcduino3nano:/var/log/ntpstats# ntpq -p localhost: timed out, nothing received ***Request timed out root@pcduino3nano:/var/log/ntpstats# Thank's. Update: This solution that appears to work really was a fail. As soon as pcDuino disconnect from energy source it refuses to update time again. I think that is not logical that a package can repair the problem, remember that in scenario 2 the date is updated correctly. ideas?
  3. Scenario 1:[router]<--(ethernet)-->[pcDuino3] pcDuino3 IP: 192.168.1.5 root@pcduino3nano:~# dpkg-reconfigure tzdata Current default time zone: 'America/Bogota' Local time is now: Wed Dec 31 20:48:49 COT 1969. Universal Time is now: Thu Jan 1 01:48:49 UTC 1970. root@pcduino3nano:~# date Wed Dec 31 20:49:01 COT 1969 root@pcduino3nano:~# ntpq -p remote refid st t when poll reach delay offset jitter ============================================================================== yak.osoal.org.n .INIT. 16 u - 64 0 0.000 0.000 0.000 bunny.zeroloop. .INIT. 16 u - 64 0 0.000 0.000 0.000 pfsense01.steam .INIT. 16 u - 64 0 0.000 0.000 0.000 strange.atfg.or .INIT. 16 u - 64 0 0.000 0.000 0.000 Scenario 2:[router]<--(wifi)-->[Desktop PC]<--(ethernet)(Internet Connection Sharing)-->[pcDuino3] pcDuino3 IP: 192.168.137.28 desktop IP: 192.168.1.48 root@pcduino3nano:~# dpkg-reconfigure tzdata Current default time zone: 'America/Bogota' Local time is now: Fri Jan 22 19:29:53 COT 2016. Universal Time is now: Sat Jan 23 00:29:53 UTC 2016. root@pcduino3nano:~# date Fri Jan 22 19:30:00 COT 2016 root@pcduino3nano:~# ntpq -p remote refid st t when poll reach delay offset jitter ============================================================================== clock.trit.net 198.60.22.240 2 u 15 64 1 147.790 8.179 3.518 198.60.22.240 .GPS. 1 u 14 64 1 113.789 -7.578 1.451 alta.fancube.co 173.34.166.174 2 u 13 64 1 163.642 -1.537 1.701 www.mindstudios 145.238.203.14 2 u 12 64 1 179.211 -3.671 3.452 Note that in scenario 1 the pcDuino don't get the correct date. I use the scenario 2 to configure the pcDuino3 but I need that pcDuino3 get the correct date in scenario 1. pcDuino iptables rules: root@pcduino3nano:~# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination root@pcduino3nano:~# Thank's.
  4. I want to write microSD card as less as possible and CUPS package uses the following path's by default (although can be changed): /var/cache/cups /var/log/cups /var/run/cups /var/run/cups/printcap /var/spool/cups /var/spool/cups/tmp But I think this paths are pointing to micro SD card (except .'/var/log') (or not?) root@pcduino3nano:/etc/cups# df -h Filesystem Size Used Avail Use% Mounted on /dev/root 7.3G 1.1G 6.0G 16% / devtmpfs 500M 0 500M 0% /dev tmpfs 128M 212K 128M 1% /run tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs 128M 0 128M 0% /run/shm tmpfs 256M 0 256M 0% /tmp ramlog-tmpfs 256M 2.2M 254M 1% /var/log Which is the best strategy so this path's points to memory and Not to microSD? I propose changing the path''s to something like '/tmp/cups/...', But I need to 'mkdir /tmp/cups/...' in the boot process after 'mount' but before CUPS start, How can I make this? I found that can be done in '/etc/rc.local' file. Is this correct ? Thank you.
  5. Sorry, I change this topic to the correct path: http://forum.armbian.com/index.php/topic/630-change-micro-sd-paths-to-memory-mount-paths-cups-package/ I want to write microSD card as less as possible and CUPS package uses the following path's by default (although can be changed): /var/cache/cups /var/log/cups /var/run/cups /var/run/cups/printcap /var/spool/cups /var/spool/cups/tmp But I think this paths are pointing to micro SD card (except .'/var/log') (or not?) root@pcduino3nano:/etc/cups# df -h Filesystem Size Used Avail Use% Mounted on /dev/root 7.3G 1.1G 6.0G 16% / devtmpfs 500M 0 500M 0% /dev tmpfs 128M 212K 128M 1% /run tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs 128M 0 128M 0% /run/shm tmpfs 256M 0 256M 0% /tmp ramlog-tmpfs 256M 2.2M 254M 1% /var/log Which is the best strategy so this path's points to memory and Not to microSD? I propose changing the path''s to something like '/tmp/cups/...', But I need to 'mkdir /tmp/cups/...' in the boot process after 'mount' but before CUPS start, How can I make this? I found that can be done in '/etc/rc.local' file. Is this correct ? Thank you.
  6. shutdown -h -P now Make it. root@pcduino3nano:~# file /sbin/shutdown /sbin/shutdown: ELF 32-bit LSB executable, ARM, EABI5 version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-armhf.so.3, for GNU/Linux 2.6.32, BuildID[sha1]=89af43ada0a4735265bbbf71aac6a8c390ceff43, stripped root@pcduino3nano:~# dpkg -S /sbin/shutdown sysvinit-core: /sbin/shutdown root@pcduino3nano:~# I will record the new format command, Thank You.
  7. Normally the 'shutdown now' sequence makes my monitor 'lost connection' message appear but with this image the shutdown process do not finalize correctly...
  8. I edited directly from NAND boot... Yes, you were right!!!, the 'FAILED' msg do not appears. But still don't have outside ssh service. I try: service sshd restart iptables -F iptables -P INPUT ACCEPT iptables -P OUTPUT ACCEPT iptables -P FORWARD ACCEPT iptables-save apt-get update apt-get install ssh (Installed 137k files) service sshd restart but nothing. Thank you.
  9. Had already suspected that. I will stick to MicroSD boot. Thank you.
  10. Boot from SD without any problems, then install to NAND (no error)... In NAND boot it comes in the log... (transcription from a photo) [ OK ] Started LSB: Set preliminary keymap. Starting Remount Root and Kernel File Systems... [FAILED] Failed to start Remount Root and Kernel File Systems See 'systemctl status systemd-remount-fs.service' for details. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems (Pre). Mounting /boot. [ OK ] Started Load/Save Random Seed [ OK ] Mounted /boot. The 'Failed' message is the only error in the log. Problem: Can ssh locally ('ssh localhost') but can't from outside (it shows nothing). ping is responding. If I boot from SD all ok. I upgrade ( 'apt-get upgrade' ) but problem persist. Thank you.