deb2016

Thanks I have seen the banapi r2 which has wifi and sata ports on board, however bananapi seems to have a low reputation and there are some criticism about the on board graphic and security. But besides this, it is nearly what I am looking for. Do you know some similar boards ? Regards

yes, card=sbc I was not aware of this, armbian support for the clearfogpro used to be deprecated (very old images).

Hello, I would like to replace the internet box of my provider with an armbian card. So, I need a card with an ethernet plug for the WAN, which will be connected to the RJ45/fibre transceiver, and a wifi/other ethernet plugs for the LAN, for usual device connections (laptop, smartphones, ...). I used to have a clearfogpro which was perfect for this job. But it is no longer maintained. Also, I would like a card with the possibility to add some disk storage either via standard M2 sata/nvme (preferred) or otherwise usb3. Regards deb2016 PS : it was required to add a tag, but do not know why, the sole choice I had to publish this post is to tag it "solved"

I installed the latest stable (and updated) debian image on clearfogpro from SD card. I then chose "boot from SD, install on SATA ..." as I have a M.2 SSD card which is viewed as /dev/sda device, with the "armbian-install" utility. However, this one does not offer to boot directly from M2. SSD, which should be possible as there is a DIP switch configuration for it. I tried to burn the iso image on sata with "dd" and then, to "dd" the u-boot.sata on "/dev/sda" (bs=512 seek=1). When switching to sata boot (dip switch), it begins well, the sata device is found, but nothing happens after, the iso image is not loaded. How can I boot directly from M.2 SSD with system installed on it ?