062621AM

How do I enable it?

I tried a few months back. My OPiPC+ shows halted on the screen. Are you sure?

Ok. But I think i will stay at trunk.40. No issue with dev trunk.40 so far.

managed to recover after chroot. could you comment if this error is normal?

Sorry for asking a newbie question. How do I run armbian-config if I cannot boot up? should I try chroot?

Anyone updated their OrangePi 3 to the latest kernel released? Now my unit won't boot up unless I plug in an SD card with an earlier kernel The details of previous working image:- I think I need help on how to start troubleshooting this

yup. but i am not sure if i need to switch kernel and into nightly build to get Panfrost to work. There is sound. I don't think Bluetooth is working.

Panfrost running in OrangePi 3, Focal is nice. I had to use the server image, https://dl.armbian.com/orangepi3/archive/Armbian_20.05.4_Orangepi3_focal_current_5.4.45.img.xz and run sudo apt-get install ubuntu-desktop.

My issue while running NicoD steps is installing meson. My error: dpkg: dependency problems prevent configuration of meson: meson depends on python3:any (>= 3.7~); however: Version of python3 on system is 3.6.7-1~18.04. My meson is from repo. This is even if I'm using @m][sko steps. Do you have steps for me to try (set GPU governor and fix frequency)?

i believe i could not follow NicoD steps completely. i skip right ahead to Now we need to install all the needed software I only have a problem here: Download and install meson wget http://ftp.de.debian.org/debian/pool/main/m/meson/meson_0.54.0-1_all.deb meson_0.54.0-1_all.deb is the latest deb file. NicoD used meson_0.52.0-2_all.deb dpkg: dependency problems prevent configuration of meson: meson depends on python3:any (>= 3.7~); however: Version of python3 on system is 3.6.7-1~18.04. i used sudo apt-get install meson and end up with meson 0.51.2-1~oibaf~b i completed Download and install mesa DRM and Download and install mesa graphics Rebooted. My command output: /var/log/Xorg.0.log DISPLAY=:0.0 glxinfo | grep OpenGL DISPLAY=:0.0 glmark2-es2 sudo find / -name "libGL*.so*" i couldn't understand what to do so i followed NicoD guide

ok, i will build later.

i think it installs libgles2-mesa Before install @Myy, result after install libgles2-mesa and then reboot i will try it later today

sudo apt show libgles2-mesa sudo apt show libgles2-mesa -a

@Myy armbian@orangepi3:~$ sudo apt show mesa N: Unable to locate package mesa N: Unable to locate package mesa E: No packages found armbian@orangepi3:~$ sudo apt-get install mesa Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package mesa armbian@orangepi3:~$

armbian@orangepi3:~$ sudo dpkg -l mesa* Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description ii mesa-utils 8.4.0-1 arm64 Miscellaneous Mesa GL utilities armbian@orangepi3:~$ i proceed with NicoD's steps?

do you know how to undo changes made by this step? sudo apt-get install software-properties-common -y sudo add-apt-repository ppa:oibaf/graphics-drivers sudo apt-get update sudo apt-get upgrade i think there is an existing mesa

any restriction i should know? for example, i must use certain Ubuntu version like focal only?

Sorry to bother again. But how to update to focal? Can I do these steps? https://linuxconfig.org/how-to-upgrade-ubuntu-to-20-04-lts-focal-fossa sudo sed -i 's/bionic/focal/g' /etc/apt/sources.list sudo apt update && sudo apt -y dist-upgrade

Seems like there's no difference after removing config.

I think it still shows llvmpipe

I don't know what to look out for Above is the log is after I set /etc/X11/xorg.conf.d/02-driver.conf

I don't think so. Do I need to follow ning's step and prepare config file? I'm using Xorg but I think my xorg is 1.19.6 based on my Xorg -version output

There was an update just now so i don't have to use armbian-config to switch kernel. Now my OrangePi 3 didn't hang. Note that i didn't install a heat sink, I only have a tiny fan built into the case.

Apparently panfrost issues are under Mesa https://gitlab.freedesktop.org/panfrost/linux/-/issues/2 https://gitlab.freedesktop.org/mesa/mesa/-/issues/2543 Is it safe for me to enable the drivers? OrangePi 3 5.5.14-sunxi64 Ubuntu 18.04.04 aarch64 I disabled using