blondu

Greetings. One question though: why did you call him media? (kernel)

Xfce 5.10.110-station-m4 works best so far.

I tried the version Ver 20230129-legacy image gnome 3, it works normally without acceleration. I tried to install with the procedure from the download page, but it didn't load the gdm anymore... Thanks!

Is it possible to install gnome with wailand on Armbian version 23.02.0-trunk_Rock-5b jammy legacy 5.10.110?

Thank you for the distributions, they all worked very well. I managed to install AX200 on M2, Bluetooth also works, I used it exclusively for audio (headphones).AX200NGW And a screenshot..

Who paid for the gnome?😆

And for me, I'm only interested in wayland. Can wayland be done in another, Kde for example?

Installed with armbian-install to SPI+NVME and works perfectly. Thanks! After this step, I also installed gnome and changed the display manager to gdm3, but when I installed wayland, I no longer had the display manager! I disabled wayland from gdm but I no longer have access to the display manager. What I did wrong? Thank you.

How can I get a driver for USB Geniatech MyGica Stick T230A please? I tried to compile drivers but I don't have the following error: Preparing to compile for kernel version 5.10.110 File not found: /lib/modules/5.10.110-station-m4/build/.config at ./scripts/make_kconfig.pl line 33, <IN> line 4. make[1]: *** [Makefile:376: alliesconfig] Error 2 make[1]: Leaving directory '/home/ady/media_build/v4l' make: *** [Makefile:26: alliesconfig] Error 2 It installs linux-headers-generic (5.15.0.53.53) so I don't know what to do. Thanks.

For USB-C I use a CABLETIME 4k/60hz cable http://www.amazon.com/Adapter-CABLETIME-Thunderbolt-Compatible-ChromeBook/dp/B082XQL1WS?th=1 and the monitor is a Benq G2420HD, Full HD, DVI, HDMI, Senseye+photo. It does not work on the DVI input, but on the HDMI it works.

I replaced the hdmi cable and it works, the previous version works with both cables!

It is about Firefly Station M3 and I tried on hdmi and on usb3, the old kernel works on usb3 as well.

1.What difference is there? 2.Why is it called M4 3.I tried to boot from the SD card but I have no video signal...

Thank you, it's a good board, it's worth it.

Hello, no news about STATION M3 or why it is not included in the official download?

I didn't know how to save the list of updates, but I managed and attached it.

I updated, how can I export the list? downloadable.txt

I use the sd card because when I remove it, it boots from the internal emmc where the STATION M3 operating system is. Is there another dual boot method?

I know for sure that it's not from the kernel because it's in the boot folder that's on the sd card and the rest is on the 254GB ssd, I don't even know that another kernel appeared other than version 5.10.66-station-m3 for rk3588s. I can try to update manually and find out...

Thank you, I recovered the data and reinstalled after which I blocked the update.

Hello, today I enabled the update and lost the graphic mode. To check, I booted a new system from the sd card, it worked and I intentionally updated it, after which it started only in text mode. Can you help me fix it, I have a lot of data and I arranged the graphic mode with many preferences. Thanks.

Does the change help NVMe SSD speed?

Excellent! What OS can be added and how is it selected? I couldn't boot from the SSD. I saw some selections in Armbian config but I didn't succeed... Thanks.

With SSD M.2 PCIe2.0 interface the writing and reading speeds are much lower. I tested here:http://ix.io/49Y3 cu ssd SAMSUNG MZALQ128HBHQ-000L2 and with gnome-disk-utility. ady@station-m3:~$ sudo hdparm -Tt /dev/nvme0n1p1 /dev/nvme0n1p1: Timing cached reads: 3388 MB in 2.00 seconds = 1694.54 MB/sec Timing buffered disk reads: 1104 MB in 3.00 seconds = 367.64 MB/sec

It surpasses me on the hardware side, I'm much more advanced... I have attached the necessary drivers. If I have some steps to follow, I'm willing to try, On odroid N2 I managed to compile drivers and 2 devices work perfectly: T230 DVB-T2 and tbs5520se with compiled oscam. my_config