Bangliang Shen

I am using a Phicomm N1
Armbian runs well on it.
CPU: Amlogic S905D, ARM Cortex-A53, Quad Core 2GHz
GPU: ARM Mali™-450, 4K@60fps Hardware acceleration support, HDMI 2.0
RAM: K4B4G1646E, DDR3-1866MHz 512MB*4=2GB
ROM: KLM8G1GEME, 8GB eMMC
Port: 1*HDMI 2.0; 2*USB2.0; 1*Gigabit Ethernet
Power Adapter: Input 110-240V～50/60Hz AC; Output 12V/2A DC
Ethernet: RTL8211F Gigabit Ethernet
WIFI/Bluetooth: CYW43455 (same as Raspberry Pi 3B+) 2.4G/5G WiFi IEEE 802.11n/ac with Integrated Bluetooth 4.1
 
and a Phicomm T1
CPU: Amlogic S912, ARM Cortex-A53, Octa Core 1.5GHz
GPU: ARM Mali™-820, 4K UHD, DOLBY H.265(HEVC)
RAM: 2GB
ROM: 16GB eMMC
Port: 1*HDMI 2.0; 1*USB2.0; 100m Ethernet
Power Adapter: Input 110-240V～50/60Hz AC; Output 5V/2A DC
WIFI/Bluetooth: 2.4G/5G WiFi IEEE 802.11n/ac with Integrated Bluetooth 4.1
【Remark: I cannot find a specified DTB file for this device】
 
and there is another device to recommend.  ZTE9 FunBox.
I hope this box will be supported by Armbian Linux.
The FunBox is powered by NVIDIA’s Tegra4 processor, based on the A15 architecture, and the superior graphics performance is delivered by a 72-core GeForce graphics processor with 2GB DDR3L memory and 8GB of Flash memory.
The specifications make the FunBox the highest performance home entertainment console in 2014.
 
 

I am using a Phicomm N1
Armbian runs well on it.
CPU: Amlogic S905D, ARM Cortex-A53, Quad Core 2GHz
GPU: ARM Mali™-450, 4K@60fps Hardware acceleration support, HDMI 2.0
RAM: K4B4G1646E, DDR3-1866MHz 512MB*4=2GB
ROM: KLM8G1GEME, 8GB eMMC
Port: 1*HDMI 2.0; 2*USB2.0; 1*Gigabit Ethernet
Power Adapter: Input 110-240V～50/60Hz AC; Output 12V/2A DC
Ethernet: RTL8211F Gigabit Ethernet
WIFI/Bluetooth: CYW43455 (same as Raspberry Pi 3B+) 2.4G/5G WiFi IEEE 802.11n/ac with Integrated Bluetooth 4.1
 
and a Phicomm T1
CPU: Amlogic S912, ARM Cortex-A53, Octa Core 1.5GHz
GPU: ARM Mali™-820, 4K UHD, DOLBY H.265(HEVC)
RAM: 2GB
ROM: 16GB eMMC
Port: 1*HDMI 2.0; 1*USB2.0; 100m Ethernet
Power Adapter: Input 110-240V～50/60Hz AC; Output 5V/2A DC
WIFI/Bluetooth: 2.4G/5G WiFi IEEE 802.11n/ac with Integrated Bluetooth 4.1
【Remark: I cannot find a specified DTB file for this device】
 
and there is another device to recommend.  ZTE9 FunBox.
I hope this box will be supported by Armbian Linux.
The FunBox is powered by NVIDIA’s Tegra4 processor, based on the A15 architecture, and the superior graphics performance is delivered by a 72-core GeForce graphics processor with 2GB DDR3L memory and 8GB of Flash memory.
The specifications make the FunBox the highest performance home entertainment console in 2014.
 
 

Yes I read this on the power adaptor it says Output 12V/2A and the adaptor size is even smaller than those of Netgear routers.  This is a really cool device!

Hellow there,
I installed Armbian_5.67_Aml-s9xxx_Ubuntu_bionic_default_4.19.0-rc7_desktop_20181117 to my Phicomm N1 box and found that the WIFI/Bluetooth is not available. 
 
Anyone can help me install the drivers?
 
 ____  ___                   
/ ___|/ _ \__  ____  ____  __
\___ \ (_) \ \/ /\ \/ /\ \/ /
 ___) \__, |>  <  >  <  >  < 
|____/  /_//_/\_\/_/\_\/_/\_\
                             
Welcome to ARMBIAN 5.67 user-built Ubuntu 18.04.1 LTS 4.19.0-rc7-aml-s9xxx   
System load:   2.45 1.19 0.57            Up time:       9 min        
Memory usage:  16 % of 1844MB     IP:            192.168.9.46
CPU temp:      49°C               
Usage of /:    9% of 29G        storage/:      51% of 128M       
[ General system configuration (beta): armbian-config ]
Last login: Wed Nov 28 12:14:46 2018
 
hardware info:
 
CPU: Amlogic S905D
RAM: 2G DDR3
8G eMMC
Ethernet: RTL8211F Gigabit Ethernet
WIFI/Bluetooth: CYW43455 ( same as Raspberry Pi 3B+ ) 5G WiFi IEEE 802.11n/ac with Integrated Bluetooth 4.1 
Datasheet
http://www.cypress.com/documentation/datasheets/cyw43455-single-chip-5g-wifi-ieee-80211nac-macbaseband-radio-integrated