Search the Community
Showing results for tags 'orangepi5b'.
-
when updating my orange pi 5, I got the following error. What can I do to fix it? ``` update-initramfs: Armbian: Symlinking /boot/uInitrd-5.10.160-legacy-rk35xx to /boot/uInitrd ln: failed to create symbolic link '/boot/uInitrd': Operation not permitted update-initramfs: Symlink failed, moving /boot/uInitrd-5.10.160-legacy-rk35xx to /boot/uInitrd renamed '/boot/uInitrd-5.10.160-legacy-rk35xx' -> '/boot/uInitrd' update-initramfs: Armbian: done. ```
-
Hello: I am tyring to build the latest version of moonlight-qt (6.0.0). Up until now, I succeded by removing the disable-libdrm and disable-wayland to enable hardware acceleration and use H264, H265 and AV1 all of them through hardware acceleration. However, I get huge decoding times and they are even variable, ranging from 40ms to 300ms depending on what is going on in the streaming. The 4.3.1 version provided by @amazingfate works very good at 4ms decoding time but I would like to test the new AV1 encoder and features from the latest version. What steps should I follow to get it working correctly? Thank you in advance
-
Hello everyone: I own an Orange Pi 5B 16GB. Today I updated from Armbian 24.2.1 to 24.5.1 stable. This new release includes the 6.1 kernel. When I issue the apt upgrade command I correctly get updated to 24.5.1 version but I am still in kernel 5.10. So, in order to be at kernel 6.1, I use armbian-config. The problem is, after doing this and rebooting, the board no longer boots, I dont' get SSH, anything... Another thing that I updated besides armbian itself where sobre libraries like libv4l or libmpp from @amazingfate, before updating those 6.1 kernel switching worked. Any help in how can I debug (like reading UART port) or solve this? Thanks in advance
-
Hello, everyone. I need a case for the orange pi 5b with compartments for 2 or more 2.5 HDDs. Maybe someone has an stl file for a 3d printer? or a 2D drawing.
-
I have several orange pi 5B running Armbian Bookworm Cinnamon doing various task and they are working quite well. when i want to check up on a system that was booted without a monitor connected at boot time i get no video output on the HDMI. when reboot with the HDMI connected the HDMI outputs video just fine. Are there any settings i can change so the HDMI will output video if a HDMI monitor is connected it boots with no monitor connected
-
I'm trying to enable i2c3 on my orange pi 5b, according to the user manual, i2c is disabled on the 26 header pins by default, and to enable them, you need to edit the /boot/orangepiEnv.txt file, however, my orange pi doesn't have that file. I tried creating a new file and copying the required instructions, then restarted linux, but it still didn't work. Has anyone encountered a similar issue or does anyone know how to resolve this?
-
I'm currently working on configuring the USB audio gadget (g_audio) on my Orange Pi 5B to ensure both the speaker and microphone are recognized by the host PC. However, I am facing an issue where only the speaker (playback) interface shows up on the host, while the microphone (capture) interface does not. Here are the steps I have followed so far: 1.Kernel Modules Loaded: sudo modprobe dwc3 sudo modprobe dwc3-gadget sudo modprobe libcomposite sudo modprobe g_audio 2.Unloaded and Reloaded g_audio Module with Parameters: sudo modprobe -r g_audio sudo modprobe g_audio p_chmask=0x3 c_chmask=0x3 p_srate=48000 c_srate=48000 3. Bind the Gadget to the USB Controller: echo "$(ls /sys/class/udc)" > /sys/kernel/config/usb_gadget/g1/UDC Despite these steps, the host PC only recognizes the playback interface. How can I configure the g_audio USB gadget on the Orange Pi 5B to ensure that both the speaker (playback) and microphone (capture) interfaces are recognized by the host PC? Are there any additional steps or configurations that I might be missing? Any help or guidance would be greatly appreciated! Thank you in advance.
-
Configure Orange Pi 5B with Armbian OS so that it displays as a microphone and speaker when connected to a PC via the Type-C port, need to ensure the correct setup of the sound card. When connect Orange Pi 5B to PC via the Type-C port, it should now recognize the Orange Pi as a microphone and speaker. Please provide detail guide and suggest to achieve this setup
-
i am using armbian 24.2.1 debian bookworm inn orangepi 5b. At first i used sd card to boot. then i wanted to use emmc to boot. so i went to armbian-config and install os in emmc from there from sd card. now it is booting from emmc if the sd card is not connected but if the sd card is connected it is booting from sd card. The worst part is, if i connect a sd card where there is no OS, it will not even boot. How can i set a order like if there is bootable os in emmc boot from there and use the sd card as storage if not boot from sd card ?
-
Hello, I need your expert help to resolve an issue on my newly purchased orange pi 5b. I was able to install armbian xfce desktop os on emmc but am unable to correctly run a purchased csi mipi camera module (OV13850). Attached are some screen grabs, I do see rk3588-ov13850-c1 appear in overlays row of armbianEnv.txt upon toggling the selection in the armbian-config. Cheese application shows message "There was an error playing video from the webcam" upon opening the application (i also installed flatpak cheese as per some comment in a forum to test). I also tested connecting camera on rk3588-ov13850-c3 but face the same issue. Is there anything I am missing here? Appreciate your feedback, thank you.
-
I burned the .img file via RkDevTool to eMMC according to the manual, however when I try to upload I get the following error: "Gave up waiting for root file system device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Missing modules (cat /proc/modules; ls /dev) ALERT! UUID=cff1be9d-0892... does not exist. Dropping to a shell!" blkid says: /dev/mmcblk1p1: PARTUUID="d0bc2961-01" fsck /dev/mmcblk1p1 says: error 2: no such file or directory cat /proc/cmdline says: root=cff1be9d-0892... rootwait rootfstype=ext4 splash plymouth.ignore-serial-consoles console=ttyS2,1500000 console=tty1 consoleblank=0 loglevel=1 ubootpart=367002d3-1140... usb-storage.quirks= cgroup_enable=cupset cgroup_memory=1 cgroup_enable=memory swapaccount=1 Obviously I should replace "UUID=cff1be9d-0892..." with "d0bc2961-01", but how do I do it from inside the initramfs and which file needs to be edited?
-
hello, i was trying to set up a 2 pin fan on my orangepi 5b and i connected it to pin 25 and 26 (GND and PWM1). When i first started this task, the output from gpio readall would show me all 26 pins on the board. As i was digging through some forums to try and get the PWM pin to operate as on/off, i came across wiringOP and when i installed it, the output of `gpio readall` changed to only show 8pins. I am unsure of what went wrong and why it only shows 8 pins. I tried removing wiringOP and it still has not made a difference. Thanks
-
I apologize in advance if I wrote to the wrong branch. Dear community, a question about OrangePi 5B (board without SPI-flash!). There is only an eMMC on the device. The computer is successfully running on the OS from the Orangepi website, recorded both on the SD card (Baleno Ether) and with eMMC (MaskROM+RKdevtool). At the same time, I see the devices themselves and their partitions, SD card and/or eMMC. The Armbian OS for OrangePi 5/5B/5 Plus (CLI or GUI) written to the SD card loads and works, BUT disk commands DO NOT SEE eMMC, only SD card partitions. In Armbian-config, there is only the Insatall/Update bootloader on SD/eMMC item, which does not change anything. If you write Armbian images to eMMC (MaskROM+RKdevtool), they are successfully recorded, but at startup, no further initramfs loading occurs. If I try to boot from the UEFI-boot (EDK II) located on the SD card, then a cyclic reboot occurs, and when I enter the UEFI-menu, I cannot save the changed settings. As far as I understand, I need to place bootfs of third-party OS on eMMC. Actually, this is the question - how to do it? Ideally, I wanted not to touch eMMC at all, but to boot from a USB HDD/SATA/Flash drive, but this is the second question that cannot be solved without the first one.))) To all those who answered, thank you in advance!)))
-
Since the specific USB hardware support is now in place, I thought it would be good to discuss pitfalls and remedies for transitioning to a modern kernel. I have now tested the 6.8.5 based Armbian. None of the latest packages (.408 - .411) come up with HDMI output. You have to have a serial console connected, and then correct the problems. 1) This is what you are greeted with: [ 6.828040] panthor fb000000.gpu: [drm] *ERROR* Failed to load firmware image 'mali_csffw.bin' To fix this do apt install armbian-firmware-full and reboot 2) The 8821cu driver has performance problems. Also, the stupid "windows" adapter comes up as a CDROM, and has to be cycled by removing and inserting with its driver loaded, for the wifi to be recognized. These seem minor fixes, firmware repackaging etc... Hopefully we can document results from testing and workarounds in this thread. A big hurray, for Armbian bringing mainstream to OPI 5..... Gullik
-
I tried for hours last night and I couldn't get a single emulator to work, and most of them simply don't exist for this version of Debian Has anyone had any luck and with what OS
-
I have managed to install mainline u-boot on my 5B. i copied the 5It boots from both MMC and the SD. To boot from the sd, you have to interrupt the boot process and tell it to boot from MMC0. the default boot order is: mmc1 mmc0 nvme scsi usb pxe dhcp spi I've tried a number of things to correct the issue but none worked. In the aliases section of rk3588s-orangepi-5b.dts, I had to device sdchi as MMC0 (it really is MMC1). Not it boots like it should. Is there a better way to get u-boot to boot from SD card first? Thanks!
-
Are there any plans to make a version with the new Rockchip 6.1 kernel available for Orange Pi 5/5+? Joshua Riek seems to have had some success, he even got the Panfork drivers running. I run a headless server though so even without graphics it would be interesting but I use Debian.
- 47 replies
-
- Orange Pi 5
- Orange Pi 5B
-
(and 1 more)
Tagged with:
-
Since I am interested in the connection ability, I figured the info we gather should go into ONE thread. I have tried to build new kernels, but can only see USB controllers and devices two ports. I have seen a lot of work by Sebasitian Reichel @ Collabora, and his patches, but these do not seem to have the desired result on my test board. Orange PI 5. There seems to be an issue with the port mux, FUSB302, that either connects the last USB to the "vertical" port or to the "USB C" connector. I will comment my findings and attempts to correct this in this thread, and think we could find out where we are if you add your findings, successes and failures, rather than cluttering everywhere Regards, Gullik
- 35 replies
-
- Orange Pi 5
- Orange Pi 5B
-
(and 1 more)
Tagged with:
-
I had one OPi5 setup and working properly with one of my TVs. I was running Kodi and using the remote from my TV to control Kodi using HDMI-CEC. I went to setup a second one on another TV but this time the TV remote did not work properly. Through elimination I came to determine the HDMI cable was the issue. I ordered another HDMI cable that had the Ferrite at each side of the cable. Now it worked properly. Thought this might be useful for others. This is the cable I ordered: https://www.amazon.ca/dp/B003PDHJ6M Conclusion: In order to make HDMI-CEC work properly, make sure the HDMI cable is of sufficient quality. I think ones with the Ferrite may be best to remove any electrical interference.
-
1
-
- Orange Pi 5
- Orange Pi 5B
-
(and 1 more)
Tagged with:
-
I booted the RC from 1/20/2024, set the ftdfile to rc3588s-orangepi-5b.dtb in armbianEnv.txt, and rebooted: no wifi or bluetooth. The hci0 and wlan0 devices are not present. They both work on the Linux 5.10 kernel. My armbianEnv.txt: -------------------------- verbosity=1 bootlogo=true overlay_prefix=rockchip-rk3588 fdtfile=rockchip/rk3588s-orangepi-5b.dtb rootdev=UUID=38eb4cb5-0503-4a0a-900f-7a5167517a20 rootfstype=ext4 overlays=sata1 sata2 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u
-
Wich Armbian destop version to use on PI 5b to be able to setup/use onboard wifi and BT ?
-
Suddenly after updating via armbian-config I lost ssh access and found the port closed. I rewrote the latest armbian version, stuck the sd card in, connected to ethernet cable via router and started up. The red and green lights were on as they should be and the internet cable was flashing green. Waited 3 minutes and checked the ports with nmap. And the port is closed again. Not responding to ping at all. I am still new to this topic. Please help and sorry if the translator translates crookedly.