Search the Community

hello, thank you for your image for olimex A10 it's perfect on sd card but i want put in the sata drive i start command ./nand-sata-install and when finish , reboot but reboot , reboot , reboot , etc.... i not understand can you help , thank you

As soon as I installed the latest version of the Wheezy I have found that there is some problem with an USB. When I start my Orange PI I can see that USB devices are power supplied from the bus only first a few seconds (when the bootloader is active I guess) and then being switched off. When I plug an USB device and supply it externally then it seems to be working well. My question is: how to switch on power supply of the USB port on my Orange PI? I have read a number of linux forums and found nothing. Very promising seems a command echo on > /sys/bus/usb/devices/usb1/power/level or similar but unfortunately it has no effect. Any hint, guys? Thanks a lot. Radek

How can I disable the auto login as the root user in the cubietruck ubuntu (XFCE)? That does not sound a good idea. How could I auto login with a different user? The GUI settings editor "display chooser" inside Session Startup doesnt work. I've been looking around how to do that, but in this case I cant find the config file which was supposed to be inside /etc/lightdm/ Thanks and congratulations for your work.

I just reinstalled my Cubietruck with the Debian jessie, image from http://mirror.igorpecovnik.com/Cubietruck_Debian_4.1_jessie_3.4.108.zip. Only one core is available. What could I do so that the two cores are detected? For what it's worth, the bootloader briefly displays a "checksum error" message. Could it be that I'm still using the old bootloader from the previous installation? (It was Debian wheezy in summer 2014.) Thanks in advance for advice.

Hi, I successfully installed owncloud on the Cubietruck. Because of owncloud, I decided to give jessie a try, since there are more packages I need already included. Got all that working. Now, I wanted to make the Cubietruck into a wireless AP following the instructions in the FAQ on Igor's blog. However, i am getting nowhere. After boot, hostapd seems to be running: ps -elf | grep hostapd 1 S root 677 1 0 80 0 - 1040 poll_s 18:25 ? 00:00:00 /usr/sbin/hostapd -B -P /run/hostapd.pid /etc/hostapd.conf However, the SSID is not picked up by any client, so it seems as if it is not braodcast. However, it is not hidden either, since I cannot add the network. When I try to restart the service, I get no output from it (where ist should give some the way I understand the init script). The service is stopped afterwards, but it is not running anymore. I can do: service hostapd status ◠hostapd.service - LSB: Advanced IEEE 802.11 management daemon Loaded: loaded (/etc/init.d/hostapd) Active: active (exited) since Wed 2015-08-05 18:54:43 CEST; 10min ago Process: 1114 ExecStop=/etc/init.d/hostapd stop (code=exited, status=0/SUCCESS) Process: 1117 ExecStart=/etc/init.d/hostapd start (code=exited, status=0/SUCCESS) Aug 05 18:54:43 cubietruck hostapd[1117]: Starting advanced IEEE 802.11 management: hostapd. Aug 05 18:54:43 cubietruck systemd[1]: Started LSB: Advanced IEEE 802.11 management daemon. Aug 05 19:03:10 cubietruck systemd[1]: Started LSB: Advanced IEEE 802.11 management daemon. Ergo: it stays exited (whereas, when I stop the service and then start it again, it says "running" istead of exited). So, I try the following by hand: hostapd /etc/hostapd.conf Configuration file: /etc/hostapd.conf nl80211: Could not re-add multicast membership for vendor events: -2 (No such file or directory) Using interface wlan0 with hwaddr <somaddress> and ssid "myssid" wlan0: interface state UNINITIALIZED->ENABLED wlan0: AP-ENABLED ^Cwlan0: interface state ENABLED->DISABLED wlan0: AP-DISABLED nl80211: deinit ifname=wlan0 disabled_11b_rates=0 So, it is doing something (until I kill it using <CTRL>+<C>), but what?. The SSID still isn't available, though. Also, according to this, the kernel module must be in op_mode 2: modprobe bcmdhd op_mode=2 This does not change anything, however. Finally, here is my hostapd.conf: ssid=myssid interface=wlan0 hw_mode=g channel=8 driver=nl80211 bridge=br0 logger_syslog=0 logger_syslog_level=0 wmm_enabled=1 ieee80211n=1 wpa=2 preamble=1 wpa_passphrase=mypassphrase wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP auth_algs=1 macaddr_acl=0 noscan=1 ## SSID verheimlichen # 0 = sichtbar # 1 = Sende leere SSID und ignoriere Anfragen die die SSID nicht enthalten # 2 = Sende leere SSID, aber setze die Länge nicht auf 0, sondern genau auf die # Länge der SSID (einige Clients brauchen das.) ignore_broadcast_ssid=0 #ht_capab=[HT40-][SHORT-GI-40][SHORT-GI-40][DSSS_CCK-40] #country_code=SI #ieee80211d=1 Any ideas? Cheers, chessplayer