Crst Posted March 29, 2019 Share Posted March 29, 2019 INFOS: Armbian Bionic mainline kernel 4.19.20 System: OrangePi Pc Monitor, full HD (1920*1080), over HDMI. SOLUTION, ROTATE SCREEN: My rotation Settings that i try: 1. xrandr (not permanently, only for this session) 2. echo n > /sys/class/graphics/fbcon/rotate_all n=0,1,2,3 (permanently solution) See: http://linux-sunxi.org/Display <-Point:Rotation PROBLEM: Screen rotation problem: On every boot the rotation is correctly applied BUT: Turn Monitor off an then on again, the rotation is NOT applied. PROBLEM SINCE : Quarterly update cycle, until november 2018 everything works fine and i did not have this problem. QUESTION: Is this still the right way rotate the screen, or is there a different/new way. Whats happend, that the Screen is not rotated after switching on again, how to solve it? Link to comment Share on other sites More sharing options...
062621AM Posted April 4, 2019 Share Posted April 4, 2019 Try this: /etc/X11/xorg.conf.d/01-armbian-defaults.conf Section "Monitor" Identifier "HDMI-1" Option "Rotate" "normal" EndSection normal(0)/right(90)/inverted(180)/left(270) Reference: https://www.x.org/archive/current/doc/man/man5/xorg.conf.5.xhtml Link to comment Share on other sites More sharing options...
Crst Posted April 4, 2019 Author Share Posted April 4, 2019 Hey thanks, I added the rotation option to the X11 config but the problem still exists... Here a Screenshot what xrand say before and after turning the Screen off and on. Someone another solution ? Link to comment Share on other sites More sharing options...
062621AM Posted April 11, 2019 Share Posted April 11, 2019 please ignore. my reply is not applicable. Link to comment Share on other sites More sharing options...
Recommended Posts