Hello
(sorry, I am writing through a translator)
I have a Zyxel NAS326 with a physically damaged NAND - it does not save the device configuration.
board photo:
Because I do not have access to the programmer, I want to replace NAND and program it in the NAS.
However, I can not run U-Boot via UART.
I tried the adapters on PL2303HX and FTDI FT232RL.
I'm using a kwboot on this topic:
Question
@GUTEK@
Hello
(sorry, I am writing through a translator)
I have a Zyxel NAS326 with a physically damaged NAND - it does not save the device configuration.
board photo:
Because I do not have access to the programmer, I want to replace NAND and program it in the NAS.
However, I can not run U-Boot via UART.
I tried the adapters on PL2303HX and FTDI FT232RL.
I'm using a kwboot on this topic:
and the u-boot file from this: https://forum.doozan.com/read.php?2,27108,31893#msg-31893
Every time this error pops up:
Sometimes it seems to start uploading, but there is also a error:
Please help.
Thank you.
Link to comment
Share on other sites
1 answer to this question
Recommended Posts