martinayotte Posted July 23, 2019 Posted July 23, 2019 I've done a build Meson64-DEV with 5.2.y ... I will commit the switch as soon as runtime test succeded ! 1
guidol Posted July 23, 2019 Posted July 23, 2019 Fine - will test it then with my Odroid C2 with S905 (Amlogic S905 = Meson64 - I dont know why I every time mix up Meson64 with a A64 CPU in my mind )
martinayotte Posted July 23, 2019 Author Posted July 23, 2019 6 minutes ago, guidol said: Fine - will test it then with my Odroid C2 with S905 Good ! Tell us if everything is fine ... Commit done ! https://github.com/armbian/build/commit/840594fad366cde199735902aa681c00db57ff3e
guidol Posted July 24, 2019 Posted July 24, 2019 15 hours ago, martinayotte said: Good ! Tell us if everything is fine ... Today I booted the Desktop-version. On the shell/cli-side seems all OK. At the Desktop-side Graphics do work well (can play Youtube ) - but I cant get any sound out of my HDMI monitor aplay -l shows: **** List of PLAYBACK Hardware Devices **** card 0: mesongxaudio [meson-gx-audio], device 0: meson-aiu-i2s.0.auto-i2s-hifi i2s-hifi-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 alsamixer doenst show any controls. In desktop-mode the system seems to use PulseAudio, but did only found a Dummy-Device and not the mesongxaudio. Do I miss some setting?
martinayotte Posted July 24, 2019 Author Posted July 24, 2019 5 hours ago, guidol said: Do I miss some setting? Was it working under 5.1.y ? If Yes, maybe I can look if DT were different between 5.1.y and 5.2.y ...
guidol Posted July 24, 2019 Posted July 24, 2019 3 hours ago, martinayotte said: Was it working under 5.1.y ? If Yes, maybe I can look if DT were different between 5.1.y and 5.2.y ... I cant tell, because the C2 is the "black sheep" of my SBC-family With this version of armbian the support seems to be much better than the last one I tested (and mostly I tested headless, because support wasnt the best). So I would say there was no sound-support in 5.1 and there is no sound-overlay. USB-Soundcard does work. The decompiled .DTB doesnst show also nothing about HDMI-Audio... My be in the far future there will be a patch used like https://github.com/armbian/build/blob/master/patch/kernel/meson64-default/0035-ARM64-dts-meson-activate-hdmi-audio-HDMI-enabled-boa.patch or https://github.com/armbian/build/blob/master/patch/kernel/meson64-default/0025-snd-meson-activate-HDMI-audio-path.patch For me - I think - a desktop SBC will start at 4GB of Ram and working Video-Acceleration and Sound. The C2 is getting near...but with 2GB of Ram a very good headless SBC now
martinayotte Posted July 24, 2019 Author Posted July 24, 2019 1 hour ago, guidol said: My be in the far future there will be a patch used like It seems that such few patches are there in DEV also, but I don't have much time right now to figure out, "time is still the missing ingredient" ...
Recommended Posts