cynfab Posted May 2, 2016 Posted May 2, 2016 I downloaded: http://mirror.igorpecovnik.com/Armbian_5.10_Pcduino3nano_Debian_jessie_4.5.2_desktop.7z and burned it to an SD card, when I tried booting the board, all I get on the uart console is the u-boot SPL signon message +++++++++++++++++++++++++++++++ U-Boot SPL 2016.01-armbian-sun8i (May 01 2016 - 01:05:19) DRAM: 1024 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 Could not determine boot source resetting ... +++++++++++++++++++++++++++++++ This repeats forever... I had previously used: http://mirror.igorpecovnik.com/Armbian_5.00_Pcduino3nano_Debian_jessie_4.4.1.zip and it worked fine on the same board. I tried recompiling u-boot from source using the Armbian build tools, with the same result. +++++++++++++++++++++++++++++++ U-Boot SPL 2016.05-rc3-armbian (May 01 2016 - 10:57:44) DRAM: 1024 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 Could not determine boot source resetting ... +++++++++++++++++++++++++++++++ The board is a PcDuino3 Nano Lite which is the same as the non-Lite version except it is missing the NAND and IR receiver. any thoughts on what might be wrong?? ...ken...
Recommended Posts