deadmetaphor Posted May 11, 2016 Share Posted May 11, 2016 Hello, Has anybody successfully used the IR sensor on Banana Pi M2? From this, after I load the sunxi-cir module, I should see the sensor in /sys/class/rc/ but I see nothing. Nothing on dmesg either. Anyone who could point me in the right direction? Link to comment Share on other sites More sharing options...
tkaiser Posted May 11, 2016 Share Posted May 11, 2016 From this, after I load the sunxi-cir module, I should see the sensor in /sys/class/rc/ but I see nothing. Nothing on dmesg either. This can't work with Armbian. We're shipping only an image with vanilla kernel (mainline) and there the necessary module should be sunxi-ir instead and enabled by default. Maybe we're using the wrong sun6i-a31s-sinovoip-bpi-m2.dts or there the IR nodes aren't defined. Since I'm not that familiar with this stuff and never used IR before I hope others might jump in providing some more information/help. Link to comment Share on other sites More sharing options...
deadmetaphor Posted May 12, 2016 Author Share Posted May 12, 2016 Thanks tkaiser! Link to comment Share on other sites More sharing options...
Recommended Posts