Beelink GS1 H6

[krachlatte]

mainline kernel support, libreelec is allready working.

 

is there any chance on getting amrbian ported here, i allready did some test and made it boot, but network does not get an ip adress

 

link with ethtool show up and 1 gbit.

 

same for the eachlink device

 

 

[hexdump]

see here:

best wishes - hexdump

[krachlatte]

Hi,

 

and ethernet is working for you with this settings on the eachlink ?

 

because the beelink device has 1000 eg 1 Gbit ethernet. and the eachlink 100mbit only

 

best regards

 

 

 

 

[hexdump]

for the eachlink it works, but of course i can't say for your device - if i remember correctly the gbit ethernet should in theory even be simpler (as not needing extra ac200 handling), but i might be wrong ... a very well maintained allwinner h6 kernel can also be found at https://github.com/megous/linux/tree/orange-pi-4.14

 

best wishes and good luck - hexdump