OrangePi Lite - Enable boot output to serial


Recommended Posts

Hi,

 

I have connected Orange Pi Lite over serial UART, but looks like the default settings are to not output the boot log to serial. You can only see U-Boot messages, then "Uncompressing Linux kernel" and after some time the login prompt comes.

 

What exactly do I need to change/configure to get the classic kernel boot log to serial console?

 

Quote

$ cat /proc/cmdline
root=UUID=b5b787c1-ea46-43ab-9140-7e7440f6d48a rootwait rootfstype=ext4 console=ttyS0,115200 console=tty1 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 consoleblank=0 loglevel=1 ubootpart=71a680ab-01 ubootsource=mmc usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u   sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16 cgroup_enable=memory swapaccount=1

Quote

$ uname -a
Linux orangepilite 5.4.45-sunxi #20.05.4 SMP Sun Jun 14 21:46:20 CEST 2020 armv7l armv7l armv7l GNU/Linux

 

Thanks

Link to post
Share on other sites
Donate and support the project!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...