Images not booting from SD card

[w1nner4fun]

Hi,

I've downloaded the latest two images from the links mentioned https://disk.yandex.ru/d/-zSW21XKN0pfIA/ArmbianTV/20230103-edge

But none of them boot from SD on my M3 box.

The only one booting is the image from this link https://redirect.armbian.com/station-m3/Bullseye_legacy_xfce

But this makes the cooling fan on the M3 to always spin at full speed and it's not usable because of this (it's really noisy).

 

How can I make the other images boot?

Tried both Etcher and USBimager.

Please help.

Thanks.

[balbes150]

55 минут назад, w1nner4fun сказал:

I've downloaded the latest two images from the links mentioned https://disk.yandex.ru/d/-zSW21XKN0pfIA/ArmbianTV/20230103-edge

Read carefully - only LAN works on the EDGE version, HDMI does not work.

 

 

[w1nner4fun]

Thanks, will try Armbian_23.02.0-trunk_Station-m3_sid_legacy_5.10.110_xfce_desktop.img

[w1nner4fun]

Tried the image mentioned above and it boots OK.

Problem is that the cooling fan is running at full speed and it's noisy as hell.

 

Is there a solution to make the fan run at lower speed?

[balbes150]

12 часов назад, w1nner4fun сказал:

Is there a solution to make the fan run at lower speed?

Ask the Firefly manufacturer.

[w1nner4fun]

Firefly's support is not too helpful, at least on the M3. I gave up asking them for support.

But I tried Firefly's Debian and Ubuntu images and those run the fan at normal/lower speed.

I don't know much about this stuff and can't tell what drivers Firefly is using for that.

Maybe you can take a look at their image as you know what to look for.

I'd appreciate that.

It could be useful for others as well.