Khadas vim3l

[jaffac]

May i ask about support for Khadas vim3l?

[Igor]

2 hours ago, jaffac said:

May i ask about support for Khadas vim3l?

We support VIM3L, just download page was disabled by mistake. Enabled now https://www.armbian.com/khadas-vim3l/

[jaffac]

Thank you Igor.

[jaffac]

I just tried 4. or 5. versions for kvim3l. On start is always same message.

 

"Gave up waiting for root file system device. Common problems: Boot args (cat /proc/cndline)

Check rootdelay= (did the system wait long enough?) Missing modules (cat /proc/modules: ls /deu)

ALERT! UUID=fb208f7b-bf5e-4f42-a9c1-3c0111c20c?? does not exist. Dropping to a shell! (initramfs)_"

[jaffac]

This is actualy on 5.19.17 old 22.11

[jaffac]

But on 23.5.1 is almost the same. Goes to shell

(initramfs)_

[Igor]

On 6/11/2023 at 2:56 PM, jaffac said:

But on 23.5.1 is almost the same. Goes to shell

That is strange. Can you tell which image exactly you are trying?

[jaffac]

It was supported 23.5 desktop and server. And some old archived versions. Maybe is something with my power source or something. Then i use whoohoho or rescue to go back and install coreelec. When Armbian get in whohoho and automatic instalation..

that will be nice.

[Igor]

@jaffac 

 

Works for me, logs: https://paste.armbian.com/feyuxegepo

 

 _  ___               _            __     _____ __  __ _____ _     
| |/ / |__   __ _  __| | __ _ ___  \ \   / /_ _|  \/  |___ /| |    
| ' /| '_ \ / _` |/ _` |/ _` / __|  \ \ / / | || |\/| | |_ \| |    
| . \| | | | (_| | (_| | (_| \__ \   \ V /  | || |  | |___) | |___ 
|_|\_\_| |_|\__,_|\__,_|\__,_|___/    \_/  |___|_|  |_|____/|_____|
                                                                   
Welcome to Armbian 23.05.1 Jammy with Linux 6.1.30-meson64

System load:   40%           	Up time:       2 min	Local users:   2            	
Memory usage:  31% of 1.90G  	IP:	       10.0.10.236
CPU temp:      59°C           	Usage of /:    38% of 15G    	
RX today:      35.6 KiB  

 

Installation:

• Download Khadas Rescue system (flash to SD card, insert, power on, hold FUNCTION and short press RESET button)
• Download Armbian image and place it to the USB drive (copy .xz or .img file, do not flash with Etcher)
• Boot into Khadas OOWOW and install to eMMC by selecting image from USB drive

This will soon be simplified as we are going to get into OOWOW.

[jaffac]

Igor u are the BOSS! Thanks again.