SerW Posted September 22, 2023 Posted September 22, 2023 Hello guys! I bought https://aliexpress.ru/item/1005005675856892.html. As I know, there is no 3D acceleration in Debian Bookworm. So, my desigion is to install Armbian Jammy Gnome desktop. My questions are: 1) In what moment should I perform trick Quote If you are having a Orange Pi 5B variant, replace fdtfile=rockchip/rk3588s-orangepi-5.dtb in /boot/armbianEnv.txt with fdtfile=rockchip/rk3588s-orangepi-5b.dtb ? 2) Legacy is the only system I can install, or is it any way to install current system? I wish kernel v6 to be installed, but not the RC kernel. My experience with SMB is Rapberry Pi 3 B and 4 B. I used to install only Raspbian on that boards. Wish me luck guys :-)) 0 Quote
NicoD Posted September 22, 2023 Posted September 22, 2023 1 hour ago, SerW said: 1) In what moment should I perform trick Best to use a Linux system to read the sd-card after writing the image. Then open the sd-card and do what's mentioned. Then you can boot the image. For adding GPU and VPU drivers in Jammy. sudo add-apt-repository ppa:liujianfeng1994/panfork-mesa sudo add-apt-repository ppa:liujianfeng1994/rockchip-multimedia sudo apt update sudo apt dist-upgrade sudo apt install mali-g610-firmware rockchip-multimedia-config To write the image to eMMC use sudo armbian-install It can boot mainline but its not realy usable. Last time I checked HDMI wasn't working. It will take a few months to year for mainline to mature. 0 Quote
octal8 Posted January 1 Posted January 1 On 9/22/2023 at 2:43 AM, NicoD said: It can boot mainline but its not realy usable. Last time I checked HDMI wasn't working. It will take a few months to year for mainline to mature. NicoD, has this situation improved since then? 0 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.