maruprez Posted October 2, 2015 Share Posted October 2, 2015 Hi everybody, First I would like to thank you Igor's work.... Excellent!!! I discovered this week your new armbian site. I decided to try wheezy for cubieboard1 but can't startup. Jessie started but never ends LSB raise network interface...... It's my fault? Excuse me i'm not english Regards Link to comment Share on other sites More sharing options...
Igor Posted October 2, 2015 Share Posted October 2, 2015 No, Jessie is broken in last build ... I need to fix it. Sorry. Use anything else. Thanks Link to comment Share on other sites More sharing options...
maruprez Posted October 2, 2015 Author Share Posted October 2, 2015 Hi Igor, Amazing fast answer. Thank you. And what about wheezy? why doesn't start? Regards Link to comment Share on other sites More sharing options...
Igor Posted October 2, 2015 Share Posted October 2, 2015 What? It should. Cubieboard 1 / Vanilla kernel 4.2.x works. I don't have this board here (getting it soon) but I tested Wheezy on Cubietruck, Banana, Lime. It works. Where does it stops? Link to comment Share on other sites More sharing options...
maruprez Posted October 2, 2015 Author Share Posted October 2, 2015 Hi Igor, Sorry about that, but doesn't start. It alway started my nandb debian previous image. No the sd image with your wheezy 4.2.2 Also i've tried Wheezy 4.1.6 and this one started but keyboard it's no operative from console. I connected via ssh and works but no directly from console. I could send you any log or file, if you would like to take a look Thank you and regards Link to comment Share on other sites More sharing options...
Igor Posted October 2, 2015 Share Posted October 2, 2015 Boot without a keyboard ... With some keyboards u-boot doesn't start. That's a known issue on recent u-boots. If this is not the case, can you check if previous version is working? http://mirror.igorpecovnik.com/Armbian_4.3_Cubieboard_Debian_wheezy_4.2.0.zip On some older 4.x kernel versions, there were not many keyboard drivers, on recent there is a lot more / what exists. Link to comment Share on other sites More sharing options...
maruprez Posted October 2, 2015 Author Share Posted October 2, 2015 Hi again, Good news.... Using Wheezy 4.1.6, I've updated and upgraded. Once upgraded Linux cubieboard 4.2.2-sunxi is working Up to now everything it's working and fine. Thank you 1 Link to comment Share on other sites More sharing options...
Кулич Куликов Posted October 9, 2015 Share Posted October 9, 2015 ethernet not run. journalctl -xb. big line log Please fixit. Link to comment Share on other sites More sharing options...
Igor Posted October 9, 2015 Share Posted October 9, 2015 We fixed but I need to rebuild kernel and images. Link to comment Share on other sites More sharing options...
Кулич Куликов Posted October 9, 2015 Share Posted October 9, 2015 I do not understand. I have to do. This apt-get log. it's related? Link to comment Share on other sites More sharing options...
Igor Posted October 9, 2015 Share Posted October 9, 2015 Yes, this is proper procedure but there is no download yet for this fix. You need to rebuild from sources or wait for next version (4.5). I need few days. Link to comment Share on other sites More sharing options...
Recommended Posts