Hubär Posted November 15, 2023 Posted November 15, 2023 Hi, i use a Rock Pi 4b with a external USB3 Seagate 4TB HDD on USB3 Port on RockPi 4B. Der HardDisk ist ext4 formatet und mounted via fstab The maximum troughput over Samba Share is around 11 Mbit The same USB HDD on a Odroid with same samba settings has an troughput over 100 MBit Any Ideas ? Thanks Ingo 0 Quote
Werner Posted November 15, 2023 Posted November 15, 2023 Providing logs with armbianmonitor -u helps with troubleshooting and significantly raises chances that issue gets addressed. 0 Quote
Hubär Posted November 15, 2023 Author Posted November 15, 2023 System diagnosis information will now be uploaded to https://paste.armbian.com/ozifivocum 0 Quote
Hubär Posted November 22, 2023 Author Posted November 22, 2023 I used iperf3 to monitor the LAN perferomance so I've seen this is no USB Problem. It seems the LAN Port only runs on 100 Mbit Accepted connection from 192.168.xxx.xxx, port 64266 [ 5] local 192.168.xxx.xxx port 5201 connected to 192.168.xxx.xxx port 64267 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 10.7 MBytes 90.1 Mbits/sec [ 5] 1.00-2.00 sec 11.3 MBytes 94.8 Mbits/sec [ 5] 2.00-3.00 sec 11.3 MBytes 94.7 Mbits/sec [ 5] 3.00-4.00 sec 11.3 MBytes 94.9 Mbits/sec [ 5] 4.00-5.00 sec 11.3 MBytes 94.8 Mbits/sec [ 5] 5.00-6.00 sec 11.3 MBytes 94.7 Mbits/sec [ 5] 6.00-7.00 sec 11.3 MBytes 94.7 Mbits/sec [ 5] 7.00-8.00 sec 11.3 MBytes 94.9 Mbits/sec [ 5] 8.00-9.00 sec 11.3 MBytes 94.8 Mbits/sec [ 5] 9.00-10.00 sec 11.3 MBytes 94.9 Mbits/sec [ 5] 10.00-10.04 sec 441 KBytes 95.0 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.04 sec 113 MBytes 94.3 Mbits/sec receiver 0 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.