Jump to content

Recommended Posts

Posted (edited)

Unreleased open hardware board in CM4 footprint

 

https://www.crowdsupply.com/ov-tech-gmbh/pi-mx8-module

 

 

SOC: NXP i.MX 8M Plus

- NXP guarantees production of the chip for 10 years.

- 4x A53 cores at up to 1.8 GHz / 1x M7 core at up to 700 MHz

- 1 GB/2 GB/4 GB/8 GB LPDDR4 system memory

- Vivante GC7000UL GPU

- Gigabit Ethernet PHY supporting IEEE 1588v2 and SyncE

- PCIe Gen3 1x1 Interface

- Optional eMMC with 8 GB/16 GB/32 GB

- Optional 2.4 GHz & 5 GHz Wi-Fi + Bluetooth 5.2 (Murata LBEE5PK2BC)

- Optional Coral Edge TPU connected via PCIe

- Two CSI-2 interfaces, one with 4-lane and one 2-lane width

 

Some open hardware carrier boards exist such as

Twisted fields CanBUS/ Robotics

Piunora Camera, Qwiic, Arduino pinout

Jkiv Gigabit, uSD

Will cluster

RobertLukan dual camera, 40 pin header

Wiretrustee SATA/ NAS

Mirko PC 2x HDMI, 2x Camera, M.2, uSD, 40pin

tkircher camera, Qwiic, M.2, HDMI, uSD

Others

 

I plan to use this thread to document the hardware and other related efforts to support IMX8 hardware, intending to add Armbian support for this board.

 

So far I have found:

 

https://github.com/Joshua-Riek/ubuntu-apalis-imx8

 

https://github.com/TechNexion-customization/ubuntu-tn-imx/tree/master?tab=readme-ov-file#technexion-ubuntu-lts-image-builder

 

 

 

pimx8-proto-white-front-edited_jpg_aa-md.jpg

Edited by sam_uk
Add https://github.com/TechNexion-customization/ubuntu-tn-imx/tree/master?tab=readme-ov-file#technexion-ubuntu-lts-image-builder
Posted
On 1/14/2024 at 5:12 PM, sam_uk said:

Because the other thread was in the wrong place, so it got locked.

The other thread got locked because your post was inappropriate.  Unless you intend to develop and maintain the Armbian support for this board, there isn't any reason to post this information here.  Igor in your other post pointed you to the following link: https://docs.armbian.com/Process_Contribute/

 

If you intend to develop Armbian support for this new board, and wish to use this thread as a place to document your work, then this is an appropriate use of the forums.  If not this post will eventually get locked as well, as you aren't asking any question to be addressed by users of the forum.

 

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines