xaja34 Posted February 1 Share Posted February 1 When I boot any variant with kernel 6..x.x from SD there is no problem with hdmi. When I flash the same variant to the nvme, it boots fine but there is no hdmi output. The orange pi logo appears for a second, then nothing. I can ssh in and everthing works fine. Any variant with 5.x.x kernel works fine from the nvme, with hdmi output. What I don't understand is that if I have output to hdmi when booting from sd, why not from nvme. What I think is relevent entries in the boot log is below. mmu fe043e00.iommu: Enable stall request timed out, status: 0x00030b Jan 30 09:38:22 orangepi3b kernel: rk_iommu fe043e00.iommu: Enable stall request timed out, status: 0x00001d Jan 30 09:38:22 orangepi3b kernel: rk_iommu fe043e00.iommu: Page fault at 0x00000000ee086d40 of type read Jan 30 09:38:22 orangepi3b kernel: rk_iommu fe043e00.iommu: iova = 0x00000000ee086d40: dte_index: 0x3b8 pte_index: 0x86> Jan 30 09:38:22 orangepi3b kernel: rk_iommu fe043e00.iommu: mmu_dte_addr: 0x00000001f4ffa000 dte@0x00000001f4ffaee0: 0x> Jan 30 09:38:22 orangepi3b kernel: rockchip-drm display-subsystem: [drm] *ERROR* POST_BUF_EMPTY irq err at vp0 Jan 30 09:38:22 orangepi3b kernel: rockchip-drm display-subsystem: [drm] *ERROR* POST_BUF_EMPTY irq err at vp0 Jan 30 09:38:22 orangepi3b kernel: rockchip-drm display-subsystem: [drm] *ERROR* POST_BUF_EMPTY irq err at vp0 Jan 30 09:38:22 orangepi3b kernel: rockchip-drm display-subsystem: [drm] *ERROR* POST_BUF_EMPTY irq err at vp0 Jan 30 09:38:22 orangepi3b kernel: rockchip-drm display-subsystem: [drm] *ERROR* POST_BUF_EMPTY irq err at Thanks 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.