Gullik Posted April 12 Author Posted April 12 A fall backwards, both 24.5.0-trunk.409 Noble and 24.5.0-trunk.410 Noble and trunk.411 seem to be missing: [ 6.828040] panthor fb000000.gpu: [drm] *ERROR* Failed to load firmware image 'mali_csffw.bin' a find / does not find it, so it seems to be missing from packaging.... I m trying to find it .... G 0 Quote
Efe Çetin Posted April 12 Posted April 12 24 minutes ago, Gullik said: A fall backwards, both 24.5.0-trunk.409 Noble and 24.5.0-trunk.410 Noble and trunk.411 seem to be missing: [ 6.828040] panthor fb000000.gpu: [drm] *ERROR* Failed to load firmware image 'mali_csffw.bin' a find / does not find it, so it seems to be missing from packaging.... I m trying to find it .... Install armbian-firmware-full 0 Quote
Gullik Posted April 12 Author Posted April 12 Yes, I did and that fixed the problem initially. However, now I do not get that message but .411 gives a black screen. The system boot but needs a serial line to set up, else no cigar. G 0 Quote
Gullik Posted April 13 Author Posted April 13 My final comment in this thread (unless something USB related comes up) USB works fine for me, and I have tested it with hub's and my own usb-device design. Also, kernels are now at 6.8.5 build.417, and boot just fine. Regards, Gullik 0 Quote
Serbitar Posted April 13 Posted April 13 I am running current rolling release Armbian trixie minimal with build.416 and USB is not working for me, also no the USB 2.0 ones. Was working with manjraro for OPI5+. 0 Quote
Serbitar Posted April 15 Posted April 15 Never mind, used the non plus image for the plus. The Armbian page for the orange pi 5 kind of makes you think that it also works for the plus, where there is a different image if you search through all the available arm images. Very confusing. 0 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.