[ Cubieboard] [kernel 4.9.7-sunxi & uboot 2017.01-armbian] stop opn reboot !

Jean-Marc

By Jean-Marc,
in Allwinner A20

 Share
0

Recommended Posts

Jean-Marc

Jean-Marc 1

Posted
Posted

Hi,

On cubieboard 1 with following config :

cubieboard login: root
Password:
Linux cubieboard 4.9.7-sunxi #1 SMP Thu Feb 2 01:52:06 CET 2017 armv7l
  ____      _     _      _                         _
 / ___|   _| |__ (_) ___| |__   ___   __ _ _ __ __| |
| |  | | | | '_ \| |/ _ \ '_ \ / _ \ / _` | '__/ _` |
| |__| |_| | |_) | |  __/ |_) | (_) | (_| | | | (_| |
 \____\__,_|_.__/|_|\___|_.__/ \___/ \__,_|_|  \__,_|
                                                     

Welcome to ARMBIAN 5.25 stable Debian GNU/Linux 8 (jessie) 4.9.7-sunxi   
System load:   0.72             Up time:       49 sec
Memory usage:  4 % of 1002Mb    IP:            192.168.15.15
CPU temp:      36°C           
Usage of /:    8% of 15G    

 

After login as root, when i launch reboot command, system hang as follow :

root@cubieboard:~# reboot
[  OK  ] Stopped target Sound Card.
[  OK  ] Removed slice system-ifup.slice.
         Stopping User Manager for UID 0...
         Stopping Authenticate and Authorize Users to Run Privileged Tasks...
[  OK  ] Stopped target Graphical Interface.
         Stopping Entropy daemon using the HAVEGE algorithm...
[  OK  ] Stopped target Multi-User System.
         Stopping Regular background program processing daemon...
         Stopping Network Manager...
         Stopping OpenBSD Secure Shell server...
         Stopping System Logging Service...
         Stopping D-Bus System Message Bus...
[  OK  ] Stopped target Login Prompts.
         Stopping Serial Getty on ttyS0...
         Stopping Getty on tty1...
         Stopping LSB: Start/stop sysstat's sadc...
         Stopping LSB: Starts LIRC daemon....
         Stopping LSB: Start NTP daemon...
         Stopping LSB: Advanced IEEE 802.11 management daemon...
         Stopping LSB: Armbian gathering hardware information...
         Stopping LSB: Set sysfs variables from /etc/sysfs.conf...
         Stopping LSB: disk temperature monitoring daemon...
         Starting Store Sound Card State...
         Starting Unattended Upgrades...
[  OK  ] Stopped Entropy daemon using the HAVEGE algorithm.
[  OK  ] Stopped Regular background program processing daemon.
[  OK  ] Stopped Network Manager.
[  OK  ] Stopped OpenBSD Secure Shell server.
[  OK  ] Stopped System Logging Service.
[  OK  ] Stopped D-Bus System Message Bus.
[  OK  ] Stopped Authenticate and Authorize Users to Run Privileged Tasks.

[  OK  ] Stopped LSB: Load kernel modules needed to enable cpufreq scaling.
[  OK  ] Stopped target Basic System.
[  OK  ] Stopped target Slices.
[  OK  ] Removed slice User and Session Slice.
[  OK  ] Stopped target Paths.
[  OK  ] Stopped target Timers.
[  OK  ] Stopped target Sockets.
[  OK  ] Closed Syslog Socket.
[  OK  ] Closed D-Bus System Message Bus Socket.
[  OK  ] Stopped target System Initialization.
         Stopping Restore / save the current clock...
[  OK  ] Stopped target Encrypted Volumes.
         Stopping Update UTMP about System Boot/Shutdown...
         Stopping LSB: Raise network interfaces....
[  OK  ] Stopped target Swap.
         Deactivating swap /var/swap...
[  OK  ] Stopped target Remote File Systems.
[  OK  ] Stopped target Remote File Systems (Pre).
[  OK  ] Stopped Restore / save the current clock.
[  OK  ] Stopped Update UTMP about System Boot/Shutdown.
[  OK  ] Deactivated swap /var/swap.
         Stopping Create Volatile Files and Directories...
[  OK  ] Stopped Create Volatile Files and Directories.
[  OK  ] Stopped LSB: Raise network interfaces..
         Stopping Apply Kernel Variables...
[  OK  ] Stopped Apply Kernel Variables.
         Stopping Load Kernel Modules...
[  OK  ] Stopped Load Kernel Modules.
         Stopping Load/Save Random Seed...
[  OK  ] Stopped target Local File Systems.
         Unmounting /run/user/0...
         Unmounting /var/log...
         Unmounting /var/log.hdd...
         Unmounting /tmp...
[  OK  ] Stopped Load/Save Random Seed.
[  OK  ] Unmounted /run/user/0.
[  OK  ] Unmounted /var/log.
[  OK  ] Unmounted /var/log.hdd.
[  OK  ] Unmounted /tmp.
[  OK  ] Reached target Unmount All Filesystems.
[  OK  ] Stopped target Local File Systems (Pre).
         Stopping Create Static Device Nodes in /dev...
[  OK  ] Stopped Create Static Device Nodes in /dev.
         Stopping Remount Root and Kernel File Systems...
[  OK  ] Stopped Remount Root and Kernel File Systems.
[  OK  ] Reached target Shutdown.
[   62.764016] reboot: Restarting system

U-Boot SPL 2017.01-armbian (Feb 02 2017 - 02:20:16)
DR

[  OK  ] Stopped Serial Getty on ttyS0.
[  OK  ] Stopped Getty on tty1.
[  OK  ] Stopped User Manager for UID 0.
[  OK  ] Stopped LSB: Start/stop sysstat's sadc.
[  OK  ] Stopped LSB: Starts LIRC daemon..
[  OK  ] Stopped LSB: Start NTP daemon.
[  OK  ] Stopped LSB: Advanced IEEE 802.11 management daemon.
[  OK  ] Stopped LSB: Armbian gathering hardware information.
[  OK  ] Stopped LSB: Set sysfs variables from /etc/sysfs.conf.
[  OK  ] Stopped LSB: disk temperature monitoring daemon.
[  OK  ] Started Store Sound Card State.
[  OK  ] Started Unattended Upgrades.
         Stopping LSB: set CPUFreq kernel parameters...
[  OK  ] Stopped target Network is Online.
         Stopping Login Service...
[  OK  ] Removed slice user-0.slice.
[  OK  ] Removed slice system-getty.slice.
[  OK  ] Removed slice system-serial\x2dgetty.slice.
         Stopping /etc/rc.local Compatibility...
[  OK  ] Stopped /etc/rc.local Compatibility.
         Stopping Permit User Sessions...
[  OK  ] Stopped Login Service.
[  OK  ] Stopped LSB: set CPUFreq kernel parameters.
[  OK  ] Stopped Permit User Sessions.
[  OK  ] Stopped target Network.
         Stopping LSB: Load kernel modules needed to enable cpufreq scaling...

[  OK  ] Stopped LSB: Load kernel modules needed to enable cpufreq scaling.
[  OK  ] Stopped target Basic System.
[  OK  ] Stopped target Slices.
[  OK  ] Removed slice User and Session Slice.
[  OK  ] Stopped target Paths.
[  OK  ] Stopped target Timers.
[  OK  ] Stopped target Sockets.
[  OK  ] Closed Syslog Socket.
[  OK  ] Closed D-Bus System Message Bus Socket.
[  OK  ] Stopped target System Initialization.
         Stopping Restore / save the current clock...
[  OK  ] Stopped target Encrypted Volumes.
         Stopping Update UTMP about System Boot/Shutdown...
         Stopping LSB: Raise network interfaces....
[  OK  ] Stopped target Swap.
         Deactivating swap /var/swap...
[  OK  ] Stopped target Remote File Systems.
[  OK  ] Stopped target Remote File Systems (Pre).
[  OK  ] Stopped Restore / save the current clock.
[  OK  ] Stopped Update UTMP about System Boot/Shutdown.
[  OK  ] Deactivated swap /var/swap.
         Stopping Create Volatile Files and Directories...
[  OK  ] Stopped Create Volatile Files and Directories.
[  OK  ] Stopped LSB: Raise network interfaces..
         Stopping Apply Kernel Variables...
[  OK  ] Stopped Apply Kernel Variables.
         Stopping Load Kernel Modules...
[  OK  ] Stopped Load Kernel Modules.
         Stopping Load/Save Random Seed...
[  OK  ] Stopped target Local File Systems.
         Unmounting /run/user/0...
         Unmounting /var/log...
         Unmounting /var/log.hdd...
         Unmounting /tmp...
[  OK  ] Stopped Load/Save Random Seed.
[  OK  ] Unmounted /run/user/0.
[  OK  ] Unmounted /var/log.
[  OK  ] Unmounted /var/log.hdd.
[  OK  ] Unmounted /tmp.
[  OK  ] Reached target Unmount All Filesystems.
[  OK  ] Stopped target Local File Systems (Pre).
         Stopping Create Static Device Nodes in /dev...
[  OK  ] Stopped Create Static Device Nodes in /dev.
         Stopping Remount Root and Kernel File Systems...
[  OK  ] Stopped Remount Root and Kernel File Systems.
[  OK  ] Reached target Shutdown.
[   62.764016] reboot: Restarting system

U-Boot SPL 2017.01-armbian (Feb 02 2017 - 02:20:16)
DR

 

----------------

And the only solution i can use is to disconnect PSU

 

Thank in advance for your help

Regards

 

 

 

 

Link to post
Share on other sites
Armbian is a community driven open source project. Do you like to contribute your code?

Jean-Marc

Jean-Marc 1

Posted
  • Author
Posted

Igor,

Many thanks for your patch. I confirm that this new u-boot (but more older that previous) is ok also for me.

Please note that this new u-boot is :.....

[  OK  ] Reached target Shutdown.
[ 1256.035752] reboot: Restarting system

U-Boot SPL 2016.09-armbian (Oct 23 2016 - 16:18:06)
DRAM: 1024 MiB
CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
Trying to boot from MMC1


U-Boot 2016.09-armbian (Oct 23 2016 - 16:18:06 +0200) Allwinner Technology

CPU:   Allwinner A10 (SUN4I)
Model: Cubietech Cubieboard
I2C:   ready
DRAM:  1 GiB
MMC:   SUNXI SD/MMC: 0

 

Do you plan to integrate this old release in future cubieboard 1 ?

Link to post
Share on other sites
Otario

Otario 0

Posted
Posted

Hi Igor,

 

one question about linux-u-boot-next-cubieboard for v5.31:

I have to revert to http://apt.armbian.com/pool/main/l/linux-u-boot-cubieboard-next/linux-u-boot-next-cubieboard_5.23_armhf.deb even after installing the latest armbian v5.31 version.

Do you think there could be a solution in the future for this issue?

 

Best regards, Otario (using Cubieboard 1, A10)

Link to post
Share on other sites
Guest
This topic is now closed to further replies.
 Share
0
Go to topic listing