DroZDI Posted May 28 Share Posted May 28 I lost whole day yesterday to try boot with new images from Armbian download page - kernel 6.1 / kernel 6.8 bookworm/trixi and none boots... If I take Ubuntu or Debian image I have no problem to boot from. Do you have the same? Link to comment Share on other sites More sharing options...
Efe Çetin Posted May 28 Share Posted May 28 @DroZDI which image did you download Link to comment Share on other sites More sharing options...
ricardo_brz Posted May 28 Share Posted May 28 I tried a few images and I wasn't able to use only the 6.8.10/11 because of video issues. All the others with kernel 6.1 worked fine. Maybe you're using the non-plus version of the images? Link to comment Share on other sites More sharing options...
DroZDI Posted May 28 Author Share Posted May 28 this is not video issue... I attached with serial port to see... it is not loading image I found something here: https://sd-card-images.johang.se/boards/orangepi_5_plus.html like a bootloader is needed? Link to comment Share on other sites More sharing options...
igelkotten Posted May 28 Share Posted May 28 @DroZDI did you unpack the .xz file? xz -d? Can you dd/(or other image tool) and mount the SD card on your computer and see a proper boot partition? Link to comment Share on other sites More sharing options...
ricardo_brz Posted May 28 Share Posted May 28 (edited) 1 hour ago, DroZDI said: https://sd-card-images.johang.se/boards/orangepi_5_plus.html I've never heard of this and doesn't look like it's Armbian. Did you try an image from the official mirros? https://redirect.armbian.com/orangepi5-plus/archive/ Edited May 28 by ricardo_brz Link to comment Share on other sites More sharing options...
Werner Posted May 29 Share Posted May 29 8 hours ago, ricardo_brz said: doesn't look like it's Armbian. Because it isn't. That is some other people's work. OP most likely used wrong image. Link to comment Share on other sites More sharing options...
DroZDI Posted May 29 Author Share Posted May 29 yes I unpack and write SD card also I tried without unpacking results the same Link to comment Share on other sites More sharing options...
ricardo_brz Posted May 29 Share Posted May 29 how exactly are you writing to the SD card? I just did it today with Gnome Image Writer and it worked without any issue. The image I used was https://mirror-us-stl1.armbian.airframes.io/dl/orangepi5-plus/archive/Armbian_24.5.1_Orangepi5-plus_noble_vendor_6.1.43_gnome-oibaf_desktop.img.xz There is no need to unpack. Right click -> open with Image Writer -> select destination (SD card) -> wait until the process finishes -> boot with SD card -> setup Armbian -> start using. 1 Link to comment Share on other sites More sharing options...
DroZDI Posted May 29 Author Share Posted May 29 For me all Armbian images stop after that: DDR Version V1.08 20220617 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB Manufacturer ID:0x6 CH0 RX Vref:30.7%, TX Vref:21.8%,20.8% CH1 RX Vref:31.7%, TX Vref:23.8%,22.8% CH2 RX Vref:30.7%, TX Vref:21.8%,20.8% CH3 RX Vref:31.7%, TX Vref:21.8%,21.8% change to F1: 528MHz change to F2: 1068MHz change to F3: 1560MHz change to F0: 2112MHz out U-Boot SPL board init U-Boot SPL 2017.09-orangepi (Jun 01 2023 - 11:41:40) Trying to boot from MMC1 Trying fit image at 0x4000 sector ## Verified-boot: 0 ## Checking atf-1 0x00040000 ... sha256(806278dba1...) + OK ## Checking uboot 0x00200000 ... sha256(cc23d8931f...) + OK ## Checking fdt 0x00311f08 ... sha256(d2dda3ef7c...) + OK ## Checking atf-2 0x000f0000 ... sha256(c00c7fd75b...) + OK ## Checking atf-3 0xff100000 ... sha256(71c3a5841b...) + OK ## Checking atf-4 0xff001000 ... sha256(2301cf73be...) + OK Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000) Total: 920.859 ms INFO: Preloader serial: 2 NOTICE: BL31: v2.3():v2.3-405-gb52c2eadd:derrick.huang NOTICE: BL31: Built : 11:23:47, Aug 15 2022 INFO: spec: 0x1 INFO: ext 32k is valid Link to comment Share on other sites More sharing options...
Werner Posted May 29 Share Posted May 29 Means nothing without stating - the exact image you are trying to use (full file name and download source) - the exact method of writing the image to the microsd card https://debug.armbian.de Link to comment Share on other sites More sharing options...
DroZDI Posted May 31 Author Share Posted May 31 I gave up with that now... I installed Ubuntu and it works Maybe I would come back to Armbian later... Link to comment Share on other sites More sharing options...
Werner Posted May 31 Share Posted May 31 So OP confirms there is no issue since they refuse to provide necessary information. Case closed. Link to comment Share on other sites More sharing options...
Recommended Posts