Jump to content

NanoPi Neo2 login stuck past entering user/password after Update


Recommended Posts

Posted (edited)

Today I did update my 3 NanoPi Neo2 via apt update/upgrade, but only one is accessable via ssh after the update.

(without SSH/SSL-conect also no conection via SFTP/WinSCP because if the timeout)

The one which is accessable has after the update 

Welcome to Armbian 23.02.2 Bullseye with bleeding edge Linux 6.7.12-edge-sunxi64

( Machine model: FriendlyARM NanoPi NEO 2)

 

The two other do show prompts for user/password but doesnt login via ssh - and after some time they time out and I can reenter user/password

After connecting via TTL-serial I can also enter user/password and then the Neo2 shows me:

 

 _   _ ____  _   _   _              ____
| \ | |  _ \(_) | \ | | ___  ___   |___ \
|  \| | |_) | | |  \| |/ _ \/ _ \    __) |
| |\  |  __/| | | |\  |  __/ (_) |  / __/
|_| \_|_|   |_| |_| \_|\___|\___/  |_____|

Welcome to Armbian 23.8.1 Bullseye with bleeding edge Linux 6.7.12-edge-sunxi64

No end-user support: community creations

System load:   266%             Up time:       2 min
Memory usage:  22% of 982M      IP:            192.168.6.24
CPU temp:      73°C             Usage of /:    54% of 15G
storage/:      56% of 458G      storage temp:  41°C
RX today:      4.2 GiB

[ General system configuration (beta): armbian-config ]

Last login: Tue Dec 27 14:13:30 +03 2022 from 192.168.6.17 on pts/0


After prssing Ctrl-C:
^C
Armbian 23.8.1 bullseye ttyS0

npi-neo2-24 login:



For non-existing users I do get a timeout at the serial-TTL-Port:

npi-neo2-24 login: maxandmoritz
Password:

Login timed out after
Armbian 23.8.1 bullseye ttyS0

npi-neo2-24 login:

 

but nothing more - and this time the login doenst time out.

 

But the armbian seems to boot up correctly, because the SAMBA-server on the Neo2 is available/useable.

 

So the only way to change something in the system will be to make modifikations to the SDCard - but which change have I to do?

 

Maybe its something between the Neo2 Revisions 1&2 (not/no Black Revision).

 

Does anyone got a glue/idea for me?

 

Thanks in advance

Guido

Edited by guidol
Link to comment
Share on other sites

  • guidol changed the title to NanoPi Neo2 login stuck past entering user/password after Update

I dont know was it was - with updated armbian (with Kernel 6.7.12-edge-sunxi64 or 6.6.31-current-sunci64) I do get a high cpu load and couldnt login anymore.

 

Because of the CPU load the temperature gets high as 73-89 degree celsius :(

 

Because I could login or find a error (maybe the installation is too old or too mich times updated) I didi go the way of fresh install, but had to avoid to much kernel/firmware to kernel 6.6.31-current-sunxi64....

 

So I ended in reinstalling all my 3 Neo2 as base-system with

Armbian_23.11.1_Nanopineo2_bookworm_current_6.1.63
(latest full cli-image for bookworm for download)

 

After initial setup (user/passwd/timezone) I did freeze kernel/firmware in armbian-config.

Then updated via apt update/upgrade to 
Welcome to Armbian 24.5.1 Bookworm with Linux 6.1.63-current-sunxi64

With that my 3 Neo2 do work stable at 43 degree Celsius (when my room is at around 29 degree celsius) - like it was before the critical update.

 

because they are mostly samba-servers (in theit siler aluminum-case) it should'nt be a problem to use only this kernel.

When it works - it works - never change a running system ;)

 

login as: root
root@192.168.6.22's password:
 _   _ ____  _   _   _              ____
| \ | |  _ \(_) | \ | | ___  ___   |___ \
|  \| | |_) | | |  \| |/ _ \/ _ \    __) |
| |\  |  __/| | | |\  |  __/ (_) |  / __/
|_| \_|_|   |_| |_| \_|\___|\___/  |_____|

Welcome to Armbian 24.5.1 Bookworm with Linux 6.1.63-current-sunxi64

No end-user support: community creations

System load:   6%               Up time:       1 min
Memory usage:  22% of 482M      IP:            192.168.6.22
CPU temp:      43°C             Usage of /:    14% of 15G
storage/:      2% of 229G       storage temp:  40°C
RX today:      158.1 MiB

[ Kernel and firmware upgrades disabled: armbian-config ]
Last check: 2024-06-05 22:23

[ General system configuration (beta): armbian-config ]

Last login: Wed Jun  5 22:06:23 2024 from 192.168.6.17
root@npineo2-22:~#

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines