Clearfogpro : boot from sata (M.2 SSD)

[deb2016]

 

I installed the latest stable (and updated) debian image on clearfogpro from SD card.

 

I then chose "boot from SD, install on SATA ..." as I have a M.2 SSD card which is viewed as /dev/sda device, with the "armbian-install"

utility.

 

However, this one does not offer to boot directly from M2. SSD, which should be possible as there is a DIP switch configuration for it.

 

I tried to burn the iso image on sata with "dd" and then, to "dd" the u-boot.sata on "/dev/sda" (bs=512 seek=1).

 

When switching to sata boot (dip switch), it begins well, the sata device is found, but nothing happens after, the iso image is not loaded.

 

How can I boot directly from M.2 SSD with system installed on it ?