[Orange Pi Lite] Using micro USB OTG

[Achpile]

Good day!

 

I'm using latest armbian build for orange pi lite (Armbian_community 25.2.0-trunk.86 Bookworm).

Tried to connect anything to OTG USB port (mouse, flash drive), but it didn't work. DMesg was silent.

 

Had 4 USB devices:

 

 

[    1.683435] usb usb1: Product: EHCI Host Controller
[    1.699369] usb usb2: Product: EHCI Host Controller
[    1.727339] usb usb4: Product: Generic Platform OHCI controller
[    1.729832] usb usb3: Product: Generic Platform OHCI controller

 

 

Then I followed this guide https://github.com/carl1961/Orange-PI-Lite-Usb-OTG-to-Host

 

And I had 5th one after this:

 

 

[    2.352145] usb usb5: Product: MUSB HDRC host driver

But still nothing.

So is there a way to make it work?

 

Thanks.

 

PS: yes, I've read this topic. The solution on github is based on that.

 

Edited December 29, 2024 by Achpile
Logs now inserted as <code>

[Werner]

Hi

 

Providing logs with

 

PASTE_SERVER_HOST=paste.armbian.de armbianmonitor -u

 

 helps with troubleshooting and significantly raises chances that issue gets addressed.

 

 

[Achpile]

Thanks! Here it is. I started device with USB Flash Drive attached to OTG port and with tweaks from https://github.com/carl1961/Orange-PI-Lite-Usb-OTG-to-Host

https://paste.armbian.de/titomuyesa