Taurus Posted August 11, 2017 Share Posted August 11, 2017 Hello, I'm starting in this world with an Orange Pi Lite, but I'm not being able to perform the initial setup using serial console gadget on the OTG port. To prevent power problems, I'm using the DC input. Unfortunately I haven't found enough information to make the configuration on a Linux PC, since I wasn't able to know the /dev address to connect through screen. You've probably noticed that my knowledge of Linux is rather scarce. Thanks in advance! Link to comment Share on other sites More sharing options...
martinayotte Posted August 11, 2017 Share Posted August 11, 2017 If you have an USB-TTL Serial dongle attached, it would be easier to figure out since you will see all the booting phase logs. 1 Link to comment Share on other sites More sharing options...
Taurus Posted August 11, 2017 Author Share Posted August 11, 2017 5 hours ago, martinayotte said: If you have an USB-TTL Serial dongle attached, it would be easier to figure out since you will see all the booting phase logs. I finally tried it with another USB cable and everything worked without problems. I should have followed the recommendations before posting a topic Thanks anyway! 1 Link to comment Share on other sites More sharing options...
Recommended Posts